206 épisodes
Another Woodshop Podcast Another Woodshop Podcast
-
- Loisirs
-
-
4,8 • 270 notes
-
A weekly podcast featuring 2 guys who share a passion for woodworking, making and content creation. We discuss what went on in our shops during the week and answer questions from you! We'd love it if you sent us a voice message or question by sending your recording to AnotherWoodshopPodcast@gmail.com
-
Episode 200: The Corn Hub (Now with 3 Hosts!)
Episode 200
This week is Episode 200 and we’ll have giveaways and all around fun!
HUGE GIVEAWAYS!
Tune in to the whole episode as we will be peppering secret code-phrases that you have to email to AWPGiveaway@gmail.com for a chance to win!
Giveaways from these wonderful sponsors:
Surf Prep Sanding - $50 Giftcard + swagCNC With Me - 1 year membership to CNC With MeTotal Boat - Huge bundle of all of their top products + swagBoss Dog Glue - 16oz bottle of glueRockler - Bench hose clamp set + marking and measuring pouchBumblechutes - The Ultimate Maker finishing KitCalavera - Leather apronPatrick Gensel - Hardwood EDC TrayCampfire Woodworks - Set of 6 high end cutting board feet. Stainless, Brass, and CopperAWP - Tee and hoody from AWP, and a Tee from all 3 hosts!
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Too many to write down! Tune in to find out!
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://awpstore.etsy.com
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.ptreeshop.com/
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://ddwwstore.etsy.com/
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the Show.
Support the Show. -
Episode 199: We Are All An Island
Episode 199
Next week is Episode 200 and we’ll have guests, giveaways, and all around fun! Make sure to tune in for the Preshow at 9PM EST on Youtube.com/anotherwoodshoppodcast
Sponsor:
PWN CNC
Check out PwnCNC for all your CNC accessories!
https://pwncnc.com/?ref=aasemfvo
Use code AWP for 5% off your order.
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News 📰
AWP is going to hit 200 episodes! - Big GiveawaysVectric Aspire and V-carve 12 dropped and they rock!Onefinity - Pete appears Calavera - Shop floodedEvan and Katelyn celebrating 10 years of marriage this weekBumblechutes - new item??!!
Whats on our bench: 🎶
Pete STILL hasn't finished the island, turned his living room into a theater, and had a meltdown.
Dan installed a new spindle on his CNC, HE BOUGHT A 3D PRINTER, and he made a cool CNC'd speaker amplifier.
Questions:
Thomas
TSG Makes
If you met a wood fairy, what would you wish for for the podcast?
Nick Brim
Nick Brim Woodworking
how do you handle inspiration/ripping off someone's design?
Lars
Pete, when you are away, will you find a sub?
You can send in your question to get answered on the podcast! Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Support the Show. -
Episode 198: You Wouldn't Download a Workbench w/ Frank Beatty [THE REAL Frank Does It]
Episode 198
Special Guest
Frank Beatty
https://www.instagram.com/therealfrankdoesit/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast (https://www.patreon.com/anotherwoodshoppodcast)
This week in Maker News 📰
⁃ Onefinity Giveaway
⁃ Surf Prep Maker Meetup on the west coast - June 8th - FREE TACOS
⁃ Maker's for St. Juke spring challenge - Over $3000 in prizes
⁃ Temecula Yard Games just raised over $1200 for makers for St Jude
⁃ Evan and Katelyn made a monster
⁃ Laguna Driftmaster DXIII - new
⁃ Festool released 3D printed files
⁃ Thunder released 3 new Bolt machines
Whats on our bench: 🎶
Frank is prepping his whole shop to paint
Dan is working on Etsy orders - SHOCKER
Pete is finishing the kitchen island build
You can send in your question to get answered on the podcast! Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore (https://www.etsy.com/shop/awpstore)
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://DDWWStore.etsy.com/
Support the Show. -
Episode 197: Happy Śmigus-Dyngus!
Episode 197
Sponsor:
PWN CNC
Check out PwnCNC for all your CNC accessories!
https://pwncnc.com/?ref=aasemfvo
Use code AWP for 5% off your order.
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News 📰
A glimpse inside - New ProductsBen Myers drove a tractor over his OnefinitySawstop Tech dramaHamilton Dilbek - Online School successMaker Collab U - Shopify and finishing classesKatz Moses - newcrosscut jig
Whats on our bench: 🎶
Pete is chipping away at the kitchen island, got a new sprayer, Emma is away and Pete is celebrating pTree-Polluza and he’s knocking out items on his honey-do list.
Dan did a spring cleaning in his shop with Nick and Braden, has a bunch of side tables in the queue to build, as well as etsy!
Questions:
Thomas
TSG Makes
What a week ! I don’t even know where to start, I don’t really have a question ! I just want to thank you guys for the tee shirts and also for making this podcast !
I found it randomly one day because I wanted to listen to something while sanding and a few months later someone from the internet crossed the Atlantic, escaped from his family in Paris to make silly videos and play with hardwood with me ! By the way, Malcom I know you’ll be listening to this, thanks again I had a lot of fun, I hope you did too even if I struggled switching to English sometimes.
Actually I do have a question for you guys : what makes this community as awesome as it is unlike others ? Is there actually a hitman that removes bad woodfluencers ?
You can send in your question to get answered on the podcast! Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Support the Show. -
Episode 196: Things Get a Little Sloppy
Episode 196
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News 📰
⁃ Patrick Gensel is down below 95k
⁃ Mortise and the hair - 1x1 block per follower challenge
⁃ The AWP Emissary has been deployed on a diplomatic mission to France
⁃ Jason Hibbs committed a war crime AND made a video
⁃ Temecula Yard Games has a raffle for Makers for St Jude’s ending next week for a set of bag boards
⁃ Boss Dog Glue
⁃ Jay Bates moves
This week in the Jointery Podcast
⁃ Ben used to work at Disney World and watched the Tinker Bell zip line down into a mattress.
⁃ Luke discovered dessert, pickles, a.k.a. bread and butter pickles
Whats on our bench: 🎶
Pete has been working with Keith in his shop helping him figure out some finishing solutions, painting his kitchen island, installed it in the kitchen, installed the drawer slides, got a delivery of more ice climbing tools, and is working on a YouTube video
Dan is caught up on delayed orders, got a ton of barstool and side table orders, worked with a local woodworker on a personalization project.
Questions:
Sarah Goldstein
Rosie’s Woodshop
I have some craft shows coming up and need some advice on inventory
Braden
Whats your favorite load out in helldivers 2? - business advice
Drew Paxton
Whats the worst content deal you’ve ever had?
Patrick Gensel
Pete where is your YouTube video?
You can send in your question to get answered on the podcast! Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore (https://www.etsy.com/shop/awpstore)
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Support the Show. -
Episode 195: Seal Team 6 Pack w/ Logan Newman [Newman Specials Woodwork]
Episode 195
This week's guest:
Logan Newman
https://www.instagram.com/newmanspecialswoodwork/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast (https://www.patreon.com/anotherwoodshoppodcast)
Questions:
Thomas
TSG Makes
I read you used to be in the navy. Have you ever seen something crazy?
Is there something you learned in the navy that you apply to your working?
Patrick Gensel
Logan, how are you one of the nicest people in the maker community
How did you get into making and designing so many cool jigs?
You can send in your question to get answered on the podcast! Record your question or comment on your phones voice memo app and email it to anotherwoodshoppodcast@gmail.com
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Support the Show.
Avis
Totally not an attack on Dan.
After listening to the professional woodworking podcasts I stumbled across this one whilst pooing at work. Given the name I thought how original I won’t have any high expectations from it. They have something called the meh army which is fitting to the show. They don’t sound like giggling school girls but more like lost boys waking aimlessly thru life. I was hoping Pete and Dan where like Batman & Robin or Sinatra and Dean Martin but instead more like Bevis and Butthead. Dan is Tim Taylor to Pete’s Al Borland, I’m just waiting for Pete to say “ I don't think so Dan.” When they play the What’s on my bench jingle the high pitch scream from Dan sounds like he pinched the twins or Fran Drescher’s annoying voice from the 90s show the Nanny. The decibel range is so high from the jingle it makes the birds fall out of the sky and my dog start to howl uncontrollably to the point where he’s kicking the high quality Home Depot pine projects I’ve built. I called in on one episode and Pete said it gets better. ( I’m still waiting for it to get better) I’m taking the jingle and making it my morning alarm sound so I get up on time just to stop the torture of Mr Dunlaps voice. Great podcast to listen to when all hope is lost. Would definitely recommend 5 out of 5 stars. Love you guys keep it up.
Woodworking Wonderland: A Five-Star Holiday Extravaganza
Another Woodshop Podcast turned my holiday season into a delightful woodworking wonderland! The hosts' festive banter and insightful tips added a special touch to my crafting sessions. The episodes are like a gift that keeps on giving – entertaining, informative, and perfect for the cozy winter evenings. Five stars for making my holidays merrier with the perfect blend of woodworking wisdom and seasonal cheer!
So far, so good
Still on that 5 star glitch. Listened from episode 1 to current and great content and topics through out the episodes. Sad to see Coffee drop off but keep up the great content!
Classement des podcasts dans Loisirs
D’autres se sont aussi abonnés à…