17 episodes

Evercoat Sr. Application Field Engineer, Tim McKinney, sits down to share valuable tips and tricks for the perfect body repair job.

Tech Tips Presented by Evercoat Tim McKinney

    • Leisure
    • 5.0 • 1 Rating

Evercoat Sr. Application Field Engineer, Tim McKinney, sits down to share valuable tips and tricks for the perfect body repair job.

    Episode 17: Aluminum Repair Products From Evercoat

    Episode 17: Aluminum Repair Products From Evercoat

    Evercoat has been making products that work with aluminum for over 40 years. Tim talks through the products and their differences and give some pointers for repairing some of the newer aluminum panels.

    • 4 min
    Episode 16: EVERCOAT Optex® Technology

    Episode 16: EVERCOAT Optex® Technology

    What is the Optex® Technology from EVERCOAT and how can it help in the repair process? Tim talks through the Optex® Fillers and Primer to help explain the product differences and how they can be used to help through the repair process for their color-changing and sanding features.

    • 7 min
    Episode 15: Reinforced and Specialty Fillers

    Episode 15: Reinforced and Specialty Fillers

    What are the fiberglass reinforced fillers from EVERCOAT, what are their differences, and how to use them? Tim walks through the differences, where they can be used, and some tricks for using them along with the specialty fillers (Vette Panel Adhesive/Filler and Metal-2-Metal) for their proper application and usage.

    • 16 min
    Episode 14: Light Speed System FAQs

    Episode 14: Light Speed System FAQs

    Since the launch of the EVERCOAT Light System™ at the 2021 SEMA Show there have been some questions about the products so Tim takes some time to address some of the top ones for the Optex® Light Speed™ Premium Filler, Light Speed™ 440 Express and Light Speed ™ LED Cure High Build Primer.

    • 15 min
    Episode 13: How to Avoid Ghost Mapping

    Episode 13: How to Avoid Ghost Mapping

    Tim talks about ghost mapping to explain what it is and what causes it, then talks about ways to avoid your repairs from showing up after paint. Tim talks about creating the correct bevel edge for fiberglass and composite repairs, and some tips and tricks to get the best repair possible.

    • 13 min
    Viscosity Adjustment | Episode 12

    Viscosity Adjustment | Episode 12

    Ever tried to thicken or thin an Evercoat Filler or Putty? Ever wondered if it could be done and how to go about doing it correctly. This month Tim talks about why and how to go about doing it the right way, and why to avoid the incorrect ways that cause problems.  

     

    • 14 min

Customer Reviews

5.0 out of 5
1 Rating

1 Rating

A Makin ,

Perfect for repair technicians

Love these best practices, really helps shop techs with the perfect repair.

Top Podcasts In Leisure

Critical Role
NPR
Clutterbug™
Si Robertson & Justin Martin
Lisa Bass
100 Thieves