
14 episodes

The Infill Podcast™ - The Place For 3D Printing, Makers, and Creators! Jonathan A. Levi
-
- Leisure
-
-
4.3 • 3 Ratings
-
The Infill Podcast™ is a weekly(ish) podcast that hosts the most respected names in the 3D Printing and Maker communities for in-depth interviews and conversations. We explore all topics related to consumer 3D Printers. Our podcast is recorded LIVE on YouTube, with audience participation, and is published raw and unedited for your enjoyment. Thanks for tuning in!
-
Ep. 13: Dr. Ye Tao, CEO of Bambu Lab, Answers ALL of Your Questions
In THIS episode, I’ll interview Dr. Ye Tao, CEO of Bambu Lab. This episode is brought to you by PCBWay. Check them out at https://jle.vi/pcbway to support the channel!
Dr. Ye Tao is the CEO of Bambu Lab (https://jle.vi/bambulab), and a former executive at DJI. In this interview, I get to ask him all the questions we’ve all speculated on, but never had the chance to ask. We’ll talk about their strategy, intellectual property and patents, their philosophy, and the competition.
Come with your questions, and we’ll hopefully get them answered, too!
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: https://patreon.com/thenextlayer
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture and https://jle.vi/polymaker
📍 My favorite 3d printers right now: https://jle.vi/bambu | https://jle.vi/voron
📍 My favorite BUDGET 3d printer right now: https://jle.vi/sovol
📍 CONSIDER SUPPORTING THE CHANNEL BY SHOPPING AT: https://jle.vi/creality | https://jle.vi/matterhackers | https://jle.vi/slice | https://jle.vi/elegoo | https://jle.vi/anycubic | https://jle.vi/gloop | https://jle.vi/pcbway | https://jle.vi/protomaker | https://jle.vi/ankermake | https://jle.vi/flashforge
🔗 OTHER LINKS 🔗
👉 Subscribe to Bambu Lab's YouTube: https://www.youtube.com/@UCDF3Sd2LNAsa-nKD17Jq3mw
👉 Follow Bambu Lab on Twitter: https://twitter.com/bambulabglobal?lang=en
👉 Like Bambu Lab on Facebook: https://www.facebook.com/bambulab3D/
👉 Follow Bambu Lab on Instagram: https://www.instagram.com/bambulab_official/?hl=en
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#bambulab #3dprinted #3dprinter -
Ep. 12: Sean Aranda, 3D Print General, on Content Creation, Bambu Lab, and More
In this episode we’re joined by The 3D Print General. Brought to you by PCBWay. Check them out at https://jle.vi/pcbway to support the channel!
Sean Aranda - AKA The 3D Print General - is a 3D printing youtube content creator and author. His YouTube channel has over 100,000 subscribers and his book is the number one best selling book on 3D printing titled - 3D Printing Failures - 2022 Edition.
He is also heavily involved in the 3D printed firearm community for which he enjoys as a fun hobby.
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: https://patreon.com/thenextlayer
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture and https://jle.vi/polymaker
📍 My favorite 3d printers right now: https://jle.vi/bambu | https://jle.vi/voron
📍 My favorite BUDGET 3d printer right now: https://jle.vi/sovol
📍 CONSIDER SUPPORTING THE CHANNEL BY SHOPPING AT: https://jle.vi/creality | https://jle.vi/matterhackers | https://jle.vi/slice | https://jle.vi/elegoo | https://jle.vi/anycubic | https://jle.vi/gloop | https://jle.vi/pcbway | https://jle.vi/protomaker | https://jle.vi/ankermake | https://jle.vi/flashforge
🔗 OTHER LINKS 🔗
👉 Check out The 3D Print General on YouTube: https://www.youtube.com/@3DPrintGeneral
👉 Follow The 3D Print General on Twitter: https://twitter.com/3dprintgeneral?lang=en
👉 Visit The 3D Print General's website: https://3dprintgeneral.com/
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter -
Ep. 11: Denise Bartacchi of Tom's Hardware on the State of the 3D Printing Industry
This episode is brought to you by Sovol, makes of the all-new SV07. Check them out at https://jle.vi/sovol
Denise is a 3D printer reviewer for Tom's Hardware, but before that she was just a blogger who enjoyed printing tiny dumpster fires for her friends. Her background is in Journalism and she looks at printers from the consumer's vantage point rather than an engineer's.
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: https://patreon.com/thenextlayer
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture and https://jle.vi/polymaker
📍 My favorite 3d printer right now: https://jle.vi/voron | https://jle.vi/voroneurope
📍 My favorite BUDGET 3d printer right now: https://jle.vi/sovol
📍 CONSIDER SUPPORTING THE CHANNEL BY SHOPPING AT: https://jle.vi/creality | https://jle.vi/matterhackers | https://jle.vi/slice | https://jle.vi/elegoo | https://jle.vi/anycubic | https://jle.vi/gloop | https://jle.vi/pcbway | https://jle.vi/protomaker | https://jle.vi/ankermake | https://jle.vi/flashforge
🔗 OTHER LINKS 🔗
👉 Follow stlDenise3D on Twitter: https://twitter.com/stldenise3d
👉 stlDenise3D's website: https://stldenise3d.com
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter -
Ep. 10: The Ethics, Legality, and Technology of 3D Printed Guns w/ John Snow & Out Of Battery Live
In this video, we’re going to keep an open mind and learn all about 3D Printed guns. This episode is brought to you by Sovol, makers of the SV06 and SV07. Check them out: https://jle.vi/sovol
We’ll be joined by John Snow and a bunch of his other co-hosts from the Out of Battery. I don't know much about 3D Printed guns, and I'm not a huge fan of guns, personally, so I want to come to this with an open mind, and I hope you guys will, too!
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: https://patreon.com/thenextlayer
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture and https://jle.vi/polymaker
📍 My favorite 3d printer right now: https://jle.vi/voron | https://jle.vi/voroneurope
📍 My favorite BUDGET 3d printer right now: https://jle.vi/sovol
📍 CONSIDER SUPPORTING THE CHANNEL BY SHOPPING AT: https://jle.vi/creality | https://jle.vi/matterhackers | https://jle.vi/slice | https://jle.vi/elegoo | https://jle.vi/anycubic | https://jle.vi/gloop | https://jle.vi/pcbway | https://jle.vi/protomaker | https://jle.vi/ankermake | https://jle.vi/flashforge
🔗 OTHER LINKS 🔗
👉 Out of Battery Live on YouTube: https://www.youtube.com/channel/UC82Q70u6QC_8LvRmLSVmKHQ
👉 Out of Battery Live's website: https://outofbattery.live/
👉 Mr. Snow Makes: https://mrsnowmakes.com/
👉 Mr. Snow Makes on Instagram: https://www.instagram.com/mr.snow.makes/?hl=en
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a review!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter -
Ep. 9: Daniel Kreuzhofer of CrossLink
Today we are joined by Daniel Kreuzhofer of CrossLink. This video is brought to you by PCBWay. Check them out at https://jle.vi/pcbway to save on PCBs, sheet metal printing, CNC, metal 3d printing, injection molding, and more!
Daniel is a seasoned Software Architect who has been with Amazon Web Services (AWS) since 2018. Prior to joining AWS, he served as a Technical Evangelist at Microsoft and honed his skills as a software developer over several years. In addition to his professional career, Daniel runs the "Crosslink" YouTube channel, which he launched in 2018. This side project is dedicated to his passion for technology and filmmaking, focusing primarily on building custom 3D printers and enhancing them with advanced hardware and software.
A true technology enthusiast, Daniel merges his love for filmmaking and innovation to share his experiences with cutting-edge technology, regardless of the subject matter. He has garnered a substantial following with his informative and engaging content, particularly in the realm of 3D printing. As part of his commitment to the 3D printing community, Daniel also manages the firmwarefactory.net project. This platform allows users to build and download custom Marlin firmware for their 3D printers, streamlining the configuration and settings management process from a centralized location.
Tune in LIVE to ask your questions on air!
🔗 LINKS: 🔗
📍 Crosslink on YouTube: https://www.youtube.com/@Crosslink3D
📍 Crosslink website: https://www.crosslink.io/
📍 Support Daniel and Crosslink: https://www.patreon.com/crosslink
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: https://patreon.com/thenextlayer
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture and https://jle.vi/polymaker
📍 My favorite 3d printer right now: https://jle.vi/voron | https://jle.vi/voroneurope
📍 My favorite BUDGET 3d printer right now: https://jle.vi/sovol
📍 CONSIDER SUPPORTING THE CHANNEL BY SHOPPING AT: https://jle.vi/creality | https://jle.vi/matterhackers | https://jle.vi/slice | https://jle.vi/elegoo | https://jle.vi/anycubic | https://jle.vi/gloop | https://jle.vi/pcbway | https://jle.vi/protomaker | https://jle.vi/ankermake | https://jle.vi/flashforge
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter -
Ep. 8: Jón Schone of Proper Printing
Get excited! Today we are joined by Jón Schone of Proper Printing, a great content creator in the 3D Printing space. This video is brought to you by PCBWay. Check them out at https://jle.vi/pcbway to save on PCBs, sheet metal printing, CNC, metal 3d printing, injection molding, and more!
🔗 LINKS: 🔗
📍 Proper Printing on YouTube: https://www.youtube.com/c/ProperPrinting
📍 Jón's website: https://properprinting.pro
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3d printing filament: https://jle.vi/overture
📍 My favorite 3d printer right now: https://jle.vi/voron and https://jle.vi/voroneurope
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
🔔 Turn on Notifications
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
⚡️ Send a "Super Thanks" (tip)
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
Customer Reviews
Amazing
I have wanted a podcast like this for so long! One that’s maker/3D printing focused. And it’s great! Thank you!
Has such great potential
Could be a fantastic listen, but 8 episodes deep and the audio seems to get worse with each episode. Maybe will give it a try down the road when the bare bone basic essentials are covered. If you can’t hear the audio, why listen to a podcast?