Выпусков: 482

Starting in the wonderful hobby of Amateur or HAM Radio can be daunting and challenging but can be very rewarding. Every week I look at a different aspect of the hobby, how you might fit in and get the very best from the 1000 hobbies that Amateur Radio represents. Note that this podcast started in 2011 as "What use is an F-call?".

Foundations of Amateur Radio Onno (VK6FLAB)

    • Образование
    • 5,0 • 1 оценка

Starting in the wonderful hobby of Amateur or HAM Radio can be daunting and challenging but can be very rewarding. Every week I look at a different aspect of the hobby, how you might fit in and get the very best from the 1000 hobbies that Amateur Radio represents. Note that this podcast started in 2011 as "What use is an F-call?".

    The ARRL incident of May 2024

    The ARRL incident of May 2024

    Foundations of Amateur Radio

    Today I want to talk about something that might feel only tangentially related to our hobby, but it likely affects you.

    Recently the ARRL announced that it was "in the process of responding to a serious incident involving access to our network and headquarters-based systems". A day later it sought to assure the community that the "ARRL does not store credit card information" and they "do not collect social security numbers" and went on to say that their "member database only contains publicly available information". Five days after that it's "continuing to address a serious incident involving access to our network and systems" and that "Several services, such as Logbook of The World(R) and the ARRL Learning Center, are affected.", but "LoTW data is secure". Over a third of the latest announcement, more than a week ago, was to assure the community that the July QST magazine is on track but might be delayed for print subscribers.

    Regardless of how this situation evolves, it's unwelcome news and much wider reaching than the ARRL.

    LoTW, or Logbook of The World, is used globally by the amateur community to verify contacts between stations. The IARU, the International Amateur Radio Union, is headquartered at the ARRL office.

    I've been told that I should have empathy and consider that the ARRL is only a small organisation that may not have the best of the best in technology staff due to budget constraints and finally, that LoTW being down for a few days is not going to kill anyone.

    All those things might well be true and mistakes can and do happen.

    The ARRL has been in existence for well over a century, bills itself as the answer to "When All Else Fails" and has even registered this as a trademark, but hasn't actually said anything useful about an incident that appears to have occurred on the 14th of May, now over two weeks ago. By the way, that date is based on the UptimeRobot service showing less than 100% up-time on that day, the ARRL hasn't told us when this all occurred, it didn't even acknowledge that anything was wrong until two days later.

    This raises plenty of uncomfortable questions.

    What information did you share with the ARRL when you activated your LoTW account? For me it was over a decade ago. I jumped through the hoops required and managed to create a certificate. What information I shared at the time I have no idea about. As I've said before, I do know that security was more extreme than required by my bank, even today, and the level of identification required was in my opinion disproportionate to the information being processed by the service, lists of amateur stations contacting each-other.

    Something to take into account, on the 30th of October 2013, Norm W3IZ wrote in an email to me: "Data is never removed from LoTW." - I have no idea how much or which specific information that refers to.

    If you used the ARRL Learning Center, what information did you share? If you're a member of the ARRL, or you purchased something from their online store, what data was required and stored? Is the data at the IARU affected? What infrastructure, other than the office, do they share?

    While I've been talking about the ARRL, this same issue exists with all the other amateur services you use. QRZ.com, eQSL.cc, eham.net, clublog.org, your local regulator, your amateur club, your social media accounts, all of it.

    What information have you shared?

    Do you have an internet birthday, address and middle name?

    Recently I received a meme. It shows two individuals talking about life, the universe and everything. They discuss their favourite books, the first movie they ever watched, the name of their pets, what car they learnt to drive in, their interests and other things you talk about when you meet someone new and interesting. The last image of the meme shows the heading: "Security Questions Answered, Welcome Amanda."

    So, my question is this: What's your favourite colour and your mother's maiden na

    • 6 мин.
    The origin of our amateur bands

    The origin of our amateur bands

    Foundations of Amateur Radio

    The origin of our amateur bands

    It's hard to imagine today, but there was a time when there was no such thing as either the 80m or the 20m amateur band, let alone 2m or 70cm.

    Picture this. It's the roaring 20's, the 1920's that is. Among a Jazz Age burst of economic prosperity, modern technology, such as automobiles, moving pictures, social and cultural dynamism, the peak of Art Deco, we're also in the middle of a radio boom where the world is going crazy buying radios as fast as they can be constructed, there are hundreds of licensed broadcasters, the bands are getting crowded, radio amateurs have been banned from the lucrative radio spectrum above 200 meters, and can only play in the "useless short waves" using frequencies greater than 1,500 kHz. And play they did.

    On the 2nd May 1925 amateurs proved they could communicate with any part of the world at any time of the day or night when Ernest J. Simmonds G2OD and Charles Maclurcan A2CM made a daylight contact between Meadowlea, Gerrards Cross, Buckinghamshire, England, and Strathfield, Sydney, New South Wales, Australia on what we now call the 20m band. This contact occurred not once, but regularly, for several days, using 100 Watts.

    To give you a sense of just how big news of this feat was, on the second scheduled contact the Prime Minister of Australia, Stanley Bruce, sent a message to England's Prime Minister, Stanley Baldwin: "On occasion of this achievement Australia sends greetings."

    If you recall, the IARU, the International Amateur Radio Union, was a fortnight old at this point. Less than a year later contact was made using voice.

    Between the banning of radio amateurs from frequencies below 1,500 kHz at the London International Radiotelegraph Conference in 1912 and the Washington International Radiotelegraph Conference in 1927 the world had irrevocably changed. In 1912 the discussion was almost all about ship to shore communication. By 1927, the world had tube transmitters, amplitude voice modulation, higher frequencies and what the 1993 IARU President, Richard Baldwin, W1RU calls, "literally an explosion in the use of the radio-frequency spectrum".

    In 1927 individual countries were beginning to control the use of spectrum, but there was no universal coordination, no international radio regulation and as we all know, radio waves don't stop at the border.

    Richard W1RU, writing in 1993 says: "In retrospect, the Washington conference of 1927 was a remarkable effort. It created the framework of international radio regulation that exists even today. It had to recognize and provide for a multitude of radio services, including the Amateur Service. It was at this conference that amateur radio was for the first time internationally recognized and defined. Bands of harmonically related frequencies were allocated to the various radio services, including the Amateur Service."

    While the IARU was two years old, it really hadn't represented amateur radio on the international stage, until now.

    The 1927 conference defined an "amateur" as a "duly authorised person interested in radio electric practice with a purely personal aim and without pecuniary interest."

    The harmonically related frequencies that were allocated to the Amateur Service are recognisable today. I'll use current band names to give you some context.

    1,715 kHz to 2 MHz, or 160m, 3.5 to 4 MHz, or 80m, 7 to 7.3 MHz or 40m, 14 to 14.4 MHz or 20m, 28 to 30 MHz or 10m, and 56 to 60 MHz or 6m.

    Of those, the 20m and 80m bands were exclusive to amateurs. The 10m and 6m bands were shared with experimenters and the 160m and 80m bands were shared with fixed and mobile services. You'll notice the absence of bands we use today, the 2m and 70cm bands, 15m and the so-called WARC bands to name a few.

    The final ratified document goes into great detail about the requirements, the restrictions, how to deal with interference, how to allocate frequencies and numerous other provisions, many of w

    • 6 мин.
    On the nature of Inspiration ..

    On the nature of Inspiration ..

    Foundations of Amateur Radio

    Over the years you've heard me utter the phrase: "Get on air and make some noise!". It's not an idle thought. The intent behind it is to start, to do something, anything, and find yourself a place within the hobby of amateur radio and the community surrounding it.

    Since starting my weekly contribution to this community, thirteen years ago, almost to the day, I promise, this wasn't planned, you'll see why in a moment, I've been working my way through the things that take my fancy, things that are of interest to me, and hopefully you. From time-to-time I don't know where the next words are going to come from. Today they came to me five minutes ago when a good friend, Colin, VK6ETE, asked me what inspires me, after I revealed to him that I didn't know what I was going to talk about.

    That's all it took to get me rolling.

    There are times when getting to that point takes weeks, I do research, figure out how something works, explore how it might have been tackled before, if at all, and only then I might start putting my thoughts together, often I'll have multiple stabs at it and if I'm lucky, sometimes, something emerges that I'm astonished by. Today is much simpler than all that, since the only research required is to remember the people I've interacted with.

    Last week I met an amateur, Jess M7WOM, who was in town. Until last week, we'd never met and interacted only online. We discovered that we have a great many things in common. A joy for curiosity, exploration, technology, computers and a shared belief that we can figure out how to make things work. That interaction, over the course of a day, continues to fuel my imagination and provides encouragement to try new things.

    The same is true for a friend, Eric VK6BJW, who asked what they should do with the hobby after having been away for a long time with family, children, commitments and work. Just asking a few simple questions got the juices going and provided inspiration to start playing again.

    Another amateur was bored and claimed to have run out of things to do. A few of us started asking questions about their exposure to the hobby. Had they tried a digital mode, had they built an antenna, had they tried to activate a park, or as I have said in the past, any of the other 1,000 hobbies that are embedded within the umbrella that we call amateur radio.

    Right now I'm in the midst of working through, actually truth be told, I'm starting, Okay, actually, I've yet to start, reading the online book published at PySDR.org. Prompted by a discussion with Jess last week, I started exploring a known gap in my knowledge. I likened it to having a lamp-post in front of my face, I can see to either side, but in-between is this post, obscuring an essential piece of knowledge, how one side is connected to the other. In my case, on one side, I can see the antenna, how it connects to an ADC, or an Analogue to Digital Converter. On the other, I can also see how you have a series of bytes coming into your program that you can compare against what you're looking for, but the two are not quite connected, obscured by that .. post. I know there's a Fourier Transform in there, but I don't yet grok how it's connected.

    Recently I discussed using an RDS, or Radio Data Systems decoder, called 'redsea', connected to 'rtl_fm', in turn connected to an RTL-SDR dongle, that is, you connect an antenna to a cheap Digital TV decoder, tune to an FM broadcast station and use some software to decode a digital signal. It turns out that the PySDR book serendipitously uses this signal path as an end-to-end tutorial, complete with all the code and example files to make this happen. I actually read the chapter, but it's assuming some knowledge that I don't yet have, so I'm going to start on page one .. again.

    So, what has this got to do with Inspiration, you ask. Well, everything and nothing. Inspiration doesn't occur in a vacuum. It needs input. You cannot see light without it hitting

    • 4 мин.
    Automatic FM DX decoding

    Automatic FM DX decoding

    Foundations of Amateur Radio

    Much is made in our hobby about working DX, that is sending and receiving distant radio signals. How distant is up for debate. Depending on where you are, DX might be outside the continent, outside the country, or in my case you could easily say, anything outside of my state, since the nearest border is about 1,240 km away from here. For giggles, the distance between Albany in the South West and Wyndham in the North East of the state is 2,400 km and that's via radio wave. By car it's 3,570 km. To be clear, we're still inside VK6.

    All that to say, DX is in the ear of the beholder.

    If that's not enough, there's a group of amateurs who are of the strident opinion that for DX to count it must be a two-way contact. That is, both stations need to hear each other and as such, those amateurs believe that a mode like WSPR, the Weak Signal Propagation Reporter can't possibly be considered DX, even if you can discover that your station was heard on the other side of the planet.

    I'm going to skip right over those who tell anyone who will listen that FT8 isn't real radio because it's just computers talking to each other.

    This to give you some context when I introduce the next idea, namely FM Broadcast DX. I'm acutely aware that this isn't amateur radio, there's no two-way communication, it's probably not DX and besides, it's computers. That out of the way, let me tell you about something I discovered.

    Many, but not all, FM broadcasters transmit multiple signals when you tune to their station. One of those is a signal called RDS, or Radio Data Systems. It's used to show you the name of the station, sometimes what song is playing, what style of station it is and other information like road traffic alerts and emergencies. You can decode this using an RDS decoder.

    Recently I was browsing YouTube. I came across a video on the Broken Signal channel that digs into the world of FM-scanning to log any RDS information for the purpose of finding DX stations. The video goes into great detail on how to set this up with Windows, by copying files into various places, updating XML files, configuring sample rates, connecting virtual audio cables, running several tools simultaneously and it goes on to demonstrate how this all hangs together.

    While I was impressed with the idea, the implementation didn't speak to me, since I wince at the notion of copying random files into an application installation directory and besides I'm a Linux user.

    So, I went hunting.

    Turns out that there is an RDS decoder for Linux, called "redsea", written by Oona OH2EIQ. It's on GitHub. Compiling it is pretty straightforward, follow the instructions and it should work as advertised. You'll also need to have "rtl-sdr" installed so you can run a tool called "rtl_fm". Again Oona's instructions should help you out. I will add that I'm assuming that you have a so-called RTL-SDR dongle, it's a cheap USB device that can be coerced into pretending to be a software defined receiver with about 2.2 MHz of bandwidth.

    Based on the example shown, I immediately tuned to a local station and RDS information started filling my screen. To let you know how simple this is, you run the "rtl_fm" tool and send its output to "redsea" which decodes the information and displays it on the screen. That's it. No more moving parts, no XML files, no shenanigans with virtual audio cables and the like.

    Stage one complete, on to stage two, scanning.

    The "rtl_fm" tool has the capability to scan a range of frequencies. I tried this, but didn't really get anywhere, since for the scanner to work you need to set the squelch in order to switch between frequencies, but if you're aiming for a weak signal, it will never be heard if your local FM broadcasters are belting away 24 hours a day.

    So, instead I'm scanning each frequency between 87 MHz and 109 MHz, every 10 kHz, for 10 seconds, to see if there's any RDS data to be heard. I send that to a file and when I feel the urge, I

    • 5 мин.
    A place for everything and everything in its place..

    A place for everything and everything in its place..

    Foundations of Amateur Radio

    Some life lessons require additional reinforcement from time to time. This week I was strongly encouraged to remember a lesson that can be summarised as: "A place for everything and everything in its place." It was first uttered like that to me a quarter of a century ago by a client who used it frequently around their staff.

    It means that all the stuff that fills up the space around you, in this case, physical stuff, needs to have a specific home and if you're not actively using it, that is where it should be. This is useful in a context where you have lots of little things that you need from time-to-time, or if you have several people dependent on the availability of a single thing, like say the labelling machine used to tag equipment.

    The other day an incident involving a tiny tablet that went flying across the kitchen bench, bounced over the edge and vanished, not helped by the fact that taking the tablet was time sensitive and the fact that the vacuum cleaner was right there - no the tablet was not inside, I checked. I walked around the bench to the other side and started rolling on the ground with the aid of the torch on my phone. Ten minutes in, still nothing. I remembered that my go-bag has a torch, so I went to get it from its place.

    One problem, it wasn't there. I turned the bag upside down and went through it. Nope, no torch. That's two things that vanished. Neither has resurfaced at this point. I went to the chemist to get another tablet and took it 40 minutes late.

    The torch however was not so easy to resolve.

    My, what I call go-bag, has a bunch of life affirming essentials. It started pretty soon after becoming a radio amateur. It has two jumpers, long-leg underwear, an under shirt, a towel and a microfibre cloth, leather gloves, mosquito net, medication, band-aids, toilet paper, soap and some empty bags. It also has a torch, well, not right now it doesn't.

    After failing on my mission to locate the torch, I started stuffing the contents of my go-bag, straight back into its bag, only to realise that I wasn't helping future me. I stopped, pulled everything back out and started folding everything neatly. Then I repacked the bag.

    I've put in a stand-by torch, in Dutch they're called a "knijpkat", or a mechanically operated torch. You squeeze it in your hand and in doing so you move a dynamo that charges either a battery or a capacitor. It's called a "pinch cat" because it sounds a little like that. The light is fine for getting around in the dark, but you wouldn't mistake it for a super bright, eyeball burning, LED torch.

    In case you're wondering why I'm going into such detail about this, it's because you never know when you need something. It might be urgent, or it might not be. Having your stuff organised in such a way that you can find it, can sometimes be the difference between life and death.

    Now I get it. Not everyone works like this. I have for decades had a system on my desk where I know where all the bits of paper are and it's not helpful if someone cleans it up, because at that point I have no reference to anything and I will have to go through the whole box of things to find what I need.

    When my partner and I travelled around Australia in an Iveco Daily stuffed to the gunnels with electronics equipment, clothes, food, camping gear, a two metre satellite dish and plenty of other things, I had a system that involved four filing cabinets bolted into the van, combined with a dozen or more crates, metal hooks, straps and a safe. I was forever putting things away in the exact same place, each time.

    It's not a process that comes naturally to everyone and so we settled on a process where I would pack the van so I could lay my hands on anything within seconds, from the socket set to the satellite signal finder, from a clean pair of shorts to a raincoat, from a fuel funnel to a water funnel. Pro-tip, don't mix the two. Tools aside, of course this system also applies to the

    • 4 мин.
    The origins of the International Amateur Radio Union

    The origins of the International Amateur Radio Union

    Foundations of Amateur Radio

    In the early 1920's long distance communication using radio was a growing interest. At the time it was thought that communication that we take for granted today, over long-distance HF, was limited to long wave or extremely low frequencies, the lower the better. With that restriction came massive antennas and high power transmitters, available only to commercial and government stations.

    Then radio amateurs let the cat out of the bag by discovering that so-called "short wave" radio could be heard all across the globe. As an aside, today, "short wave" seems quaint, because we've discovered that even shorter waves can be used to communicate, right down to nanometre communication as shown by NASA in its XCOM technology demonstration on the 12th of May, 2019. On a daily basis we use 120 mm and 60 mm waves when we use 2.4 and 5 GHz Wi-Fi for example.

    As a result of the discovery of short wave radio, a gold-rush emerged. There was a hunger in the community for radio, businesses and communities adopted the new medium, there were radio courses being taught in Universities, church services and other forms of entertainment started filling the airwaves. Comedy, talk shows, music, concerts, serials and dramas spread across the electromagnetic spectrum and radio amateurs who had discovered the phenomenon were running the risk of being pushed aside by commercial interests willing to pay for access.

    As I've said before, in many countries at the time, amateur radio was actively discouraged, sometimes it was even illegal.

    Before we continue, I should quote some statements made about radio before the gold-rush which at the time was seen as "Telegraphy Without Wires".

    In 1865 a Boston Post editorial proclaimed: "Well-informed people know it is impossible to transmit the voice over wires and that were it possible to do so, the thing would be of no practical value."

    Lord Kelvin, President of the Royal Society, said: "Radio has no future." and went on to say: "Wireless is all very well but I'd rather send a message by a boy on a pony", he also said: "Heavier-than-air machines are impossible." and "X-Rays will prove to be a hoax."

    Not all statements aged as badly. The New York Times said in 1899: "All the nations of the earth would be put upon terms of intimacy and men would be stunned by the tremendous volume of news and information that would ceaselessly pour in upon them."

    Back to the IARU. Before a business trip to Europe, the board of directors of the ARRL asked their President, Hiram Percy Maxim, to encourage international amateur relations, which on 12 March 1924 resulted in a dinner given, at the Hotel Lutetia in Paris according to Hiram, a "certain dining room" by "the most distinguished radio men of Europe."

    Hiram goes on to say that: "This A.R.R.L. President has sat in at a good many very impressive radio meetings in the past, ranging from Maine to California, but he has never sat in at a meeting where there was quite as much thrill as at this meeting in Paris where the amateurs of nine different countries sat down together."

    The countries were, France, Great Britain, Belgium, Switzerland, Italy, Spain, Luxembourg, Canada and the United States. Hiram remarks that "Denmark was represented by a letter in which regret was expressed at the inability to have a representative present and asked that the amateurs of Denmark be counted in." You should dig up a copy of the May 1924 edition of QST to get a sense of occasion where the ARRL president compares the thrill of the "hamfest" to the atmosphere during that dinner and pities those who have never experienced it.

    During the meeting it was decided to form an organisation which was going to be called the International Amateur Radio Union. A temporary committee was formed that appointed Hiram Maxim as the chair and Dr. Pierre Corret as secretary to take charge of the details to create a permanent organisation. The final decision was to call for a general A

    • 7 мин.

Отзывы покупателей

5,0 из 5
1 оценка

1 оценка

Топ подкастов в категории «Образование»

Начнем с понедельника
Start Monday
Нас Этому Не Учили
Юля Бикеева
Не учи меня жить
Научись искусству помощи себе (с Аленой Борьессон)
Как показать солнце: японская культура в СССР
Музей «Гараж»
ВОТ ЭТО английский
Иван Матюхин
TED Talks Daily
TED

Вам может также понравиться

Ham Radio Workbench Podcast
Ham Radio Workbench
Ham Radio Crash Course Podcast
Josh Nass KI6NAZ
VK6ARN Amateur Radio News - NewsWest
VK6ARN
QSO Today Podcast - Interviews with the leaders in amateur radio
Eric Guth, 4Z1UG
Amateur Radio Roundtable
Tom Medlin
On the Air
Becky Schoenfeld, W1BXY