Woodshop Life Podcast

Woodshop Life Podcast
  • 4.9 (17)
  • HOW TO
  • UPDATED FORTNIGHTLY
Woodshop Life Podcast

Bi-Weekly Podcast Focused on the Craft of Woodworking

  1. 13 DEC

    Jig Making, Too Many Exotics?, Honing Hand Tool Skills and MORE!!!

    This Episodes Questions: Brians Questions: Hola fellas,Been a minute since I've bothered you, I've been busy with rebuilding my 1000 sqft deck with black locust I am milling from logs. It's taking a while, and most of my families patience with me. I took a detour to rebuild my music studio, so now all my neighbors get to listen to death core metal. I need to mill up this beech tree for a giant dresser but that's a topic for another time. Lot going on around here.I got a hot one for today:Some unbridled genius at my kids' day camp decided it would be a good idea for me to teach young children woodworking. I tried to explain that I have a company to run, am really irresponsible with other people's kids, don't know how to keep myself safe, etc. but they're pretty insistent. I talked them down from me being an actual camp counselor, to doing one or two workshops a week with different age groups from 6 up to 12 years old.I have a ton of scrap that can be used, a box of screwdrivers and crab mallets, 20 little glue bottles, and a bunch of sandpaper. Now I need some projects.Any ideas? I have the standard bird house / solid wood cutting board / pencil holder type stuff you can find online but I want something more exciting. What else can I do with young kids, that can be glued, nailed, tied, or screwed together from pre-fabricated parts? I want to get them to decorating whatever we make as quickly as possible, I've found with my kids that's when they get really excited.I should mention the camp has offered to purchase some tools for the kids, and materials, so I'm not limited there, but I think i want to keep power tools out of it. Make me a hero here gentlemen and I will be certain to share the accolades with WSLPC (WLP?). Happy Thanksgiving / Holidays / New Year's. Big Tom Hello guys,Is there a material / construction method that I should be preferring for making jigs if I want them to last a long time?Max Greddie Woodworks Guys Questions: I am looking to build a dresser.   Tentatively, I am thinking zebrawood main structure, which I would stain to match a cinnamon-brown stained maple desk that will be sitting beside the dresser.   I am thinking about doing the drawer fronts in Bubinga, which also looks similar in color to the maple and zebrawood, when finished. The top of the dresser, I was thinking of quartersawn Sapele.   Sapele is relatively inexpensive and I love the ribbons and chatoyance of Sapele.   The mirror surround material I am still undecided on, but probably Sapele.Is this too many wood types on one piece ?   I have a few more bedroom pieces to eventually make and it seems like I risk having every species in The Wood Database in my bedroom, but my last couple of pieces have been Sapele and Khaya, and although I like the look, it's time for a change. Stephen It's rather simple or basic, actually.  When I first entered this school shop, it had been a while since there was a dedicated teacher.  As such, some of the equipment was in need of some maintenance attention.  Specifically, the tops or working surfaces of various pieces of equipment (3 table saws, planer, jointer, sanders, band saws, etc. - hopefully you get the picture).  I purchased a can of Johnson's paste wax, a couple of wax applicators and went to town.  Now, in the present, I can see the bottom of my can of wax - AND THERE IS NO JOHNSON'S PASTE WAX TO BE FOUND (except for certain websites that want an near fortune for the stuff).  I know there are other products that companies have dedicated time and money to develop just for this purpose (various sprays and the like) but am wondering a couple of things.  Should I, because according to the company, it isn't coming back so I should just embrace the change and just use the new stuff - OR - is there a similar product that can accomplish the same objective and is a simple solution?  Will any paste wax work?  I have seen a product called Shop Wax made by Bumblechutes and am wondering if that will w

    59 min

  2. 30 NOV

    Workbench Stability, Drum Sander Woes, Veneer Glus and MORE!!!

    This Episodes Questions Brians Questions  I was at a big box store the other day getting a new toilet. As I passed the lumber section, I saw what looked, from far away, like a piece of walnut. On closer inspection, it was a piece of rainbow poplar in with the ugly, green big box poplar for the same price as the regular poplar. Of course I bought it. My question is: was that awesome and, if so, how awesome?Thanks, Sincerely, American Bob Hey Gents! Canadian listener here, I found your podcast about a week ago and i have been listening every day now. Thanks for the content.I started woodworking this year and just built a new workbench using Paul Sellers plans. It has a laminated 2x3 top with a well so it's quite heavy. I use both power tools and hand tools. The main point of making this new bench was to make it heavy so it doesn't slide during hand planing, but it still slides!!! Any tips on how to prevent workbench slide?My workbench needs to float away from the wall so i am looking for a solution that isn't "put something behind it".Any tips would be greatly appreciated!Thanks again! Tyler Guys Questions I have a question regarding the drum sander. I only swear while doing two things, playing golf and using my drum sander.   I bought a new Supermax 16-32 and had nothing but problems with it and had to send it in for warranty repair.  I sold it and upgraded to a Powermatic PM2244 which I believe Guy has.  I definitely have had better luck with the Powermatic but still have issues with burning at times.  I do make end grain cutting boards for friends, family and donations.  I know the end grain is extremely hard.  I take very shallow passes, usually .002 to .004 per pass running the conveyor at 4 FPM and no matter how careful I am I still will get burning and grooves.  It doesn’t matter the grit of the sandpaper.  I’ve experimented with feed rate with no luck.  I know the glue does create heat and builds up on the paper so I clean the sandpaper often.  Do you have any recommendations or should I start a swear jar to raise money for charity?  Thanks again, Matt Good evening, gentleman!  Thanks for this amazing podcast and all the info!  I had a quick question on blades for a cheap table saw.I used to use the newer delta contractors saw (miss it so much..best saw I've used)   unfortunately, had to down size.   So I'm back to my ryobi cheaper saw.   I keep the blade and adjustments true, so it cuts well....for what it is.   Yall mentioned a few weeks back, thin curf blades vs regular 10".    Question: I use a smaller circular saw blade in my table saw. Have you? Have you noticed more power and better cuts?  Because I have.  In all saws I've used.  Would you recommend using a smaller blade in a cheap table saw to get more power to the blade?     I'm just kinda wondering your thoughts on that.  I'm a one man backyard shop   that mostly is building cabinet doors out of poplar and barn doors out of pine,  and poplar.   Thoughts?    Thanks in advance!  Keep up the amazing programming! Crafted Carpentry Canada Huy's Questions EH gentlemen from the Niagara region in Ontario Canada, been listening to your excellent podcast for some time now and thoroughly enjoy it so thank you for that. My question concerns urns and specifically how it seals. For context, my wife's grandmother has recently passed away and I was asked by my wife's family to make her urn.I don't own a lathe but I very carefully using an angle grinder with a shaping disc, orbital sander and an excessive amount of hand sanding created a typical tapering cylindrical urn that is fatter about 1/3 of the way down from the top, tapering upwards and downwards from there and I used segmented layers to achieve this.The urn is made of blood wood and has soft maple accent rings.The lid I created was a simple circle that I used dowel pins and magnets to secure it to the top of the urn.I am extremely happy with how the urn turned out and how the lid looks on the urn but I am n

    1h 4m

  3. 15 NOV

    Small Shop Lumber Storage, Hard Oil Waxes, Board Width For Glue-Ups and MORE!!!

    This Episodes Questions: Brians Questions: I have a question on wood storage I have a smaller shop and lots of tools so wood storage space is tight.  I purchase my wood based on what I have planned for the next 2-3 projects and try not to stock many extra boards.  I store them on end leaning against an outside wall.  I often clamp several boards together to help avoid bowing.  So far no problems but I am fairly new to full time woodworking as I retired 2 years ago. Do you see any problems with this method that I haven't experienced yet?  With the cost of hardwood lumber I don't want to be surprised with wood that I cant use. Thanks Dean I’m just finishing up building all the cabinetry for my Seattle home and decided to take on the interior doors as a new challenge. I’d like the doors to appear as if they’re made from 5-6 vertical wood boards, with a small 1/8” kerf between each board (I’ve attached an inspiration image). I know that a large glue-up of solid wood would expand and contract undesirably for a door, so here’s my current plan to keep things stable:I’m planning to veneer 1 1/2” by 5 1/2” TimberStrand engineered studs with 1/8” shop-sawn veneers in a vacuum press, ending up with a 1 3/4” stile. Then, I’d edge glue the 5-6 stiles together, reinforcing each joint with Dominos. Once glued up, I’d add the 1/8” kerfs with a track saw.My questions are as follows:        1.        Would you recommend using the largest 14mm x 140mm Dominos between each stile, and if so, how many and at what spacing across each 8-foot section?        2.        Do you have any tips for gluing the doors up flat?        3.        Does this seem like a viable method to achieve a flat, stable door with the look I’m after, or is there another approach you’d suggest?Thanks for your input and for all the time you put into creating such a great show! Best, Sam  I would like your thoughts on the depth/ratio you prefer for cabinet or bookcase dado's for shelves - for example if using 3/4" plywood for a cabinet, or 3/4" hardwood a bookcase. It is my understanding that 1/4" is a good depth overall. I am planning on building both some cabinets this fall, but my current project that I am preparing for is a hardwood Scandinavian bookcase. I am considering fixed shelves installed via dado. Each shelf will have an offset vertical shelf divider, also installed via dado. John Sanchez  Guys Questions:  A few years ago I refinished our oak dining table. It may be close to 100 years old.  My mother used it in her youth, and I am now 61 years old.  To refinish it, I used - sorry to say - MinWax - stain and water based satin Polycrylic.  We use this table everyday for any meal we eat at home.  Well, the finish has gotten gummy where I rest my arms on the table. Now I need to refinish it again. I had recently applied Osmo Polyx-Oil hard oil wax on a guitar neck that I finished, and really like it.  Would this be a good, durable finish for an oak dining table that sees daily use?  And not gum up again?Thanks, David Vespoint I am contemplating a (non-epoxy) dining table build using some soft maple slabs I have acquired. I will mill the slabs into as wide of boards as I can and glue them up and get them surfaced so that my final dimensions will be about 84”x35”x2.5”. I want to add a fairly significant under bevel, leaving about 3/4” on the edge and cutting at a 16 degree (or 74 degree, depending on how you measure it) angle, so that the bevel ends about six inches from the edge on the bottom of the table. My question is: How the heck do I do that? I have a table saw, but I don’t think I’m lifting this whole tabletop and running it through my table saw (the blade isn’t long enough anyways). I thought about getting a track saw, but it turns out they use dinky little blades. Do I make an angled sled for my router? Do I use my 4” handheld power plane? Is there another solution I am not imagining? Thanks! Jon I'm building a couple of nightstands for my daughter bas

    48 min

  4. 1 NOV

    Dye Colors, Mitered Boxes, Glue Creep and MORE!!

    This Episodes Questions: Brians Questions: Hello Guys,Love the show so much great information. I have recently got into scroll sawing. I am a comic book fan and I want to start scrolling the comic book art that I love. As you may know comic book art is very colorful. My goal is to start getting enough exotic wood to try and cover as much color as I can. In the mean time I would like to start using stain to color the woods. Are you all aware of any stains that have a good color spectrum.ThanksKorey from Independence KY I am looking to build a shop building on my property. What is the minimum square footage you would recommend for a home hobbyist? I will have a miter saw, router table, table saw, and eventually a planer and dust collector. And of course a work bench with a saw vise.I have plenty of room on my property, so that isn't a limiting factor. My biggest concern is not spending money that I don't need to on a building that is larger than needed.What are some things you recommend that I plan for when building? Power outlet locations and qty, ceiling height, lighting type, etc.?Thanks in advance! Kyle Guys Questions: I know you guys have referenced putting shellac under water based finish so you can have the richer look in the wood but ease/quick timeline of water based. I typically use an airless sprayer to apply General Finishes High Performance. I have some projects with walnut that I would normally finish with Arm-R-Seal to get the rich walnut tone. Id like to try the shellac coat first and then High Performance on top. I was wondering what is your standard application practice when you do this. Do you apply shellac (by hand or spray) and then wait a few hours/a few days/a week? Thanks for the advice and looking to avoid any pitfalls in the process being that Ive never done it before. Thanks and keep up the good work on the podcast.Pete from Uncarved Block Woodworks, Madison, WI Do you have any tips for glueing up mitered-corner boxes to ensure they are square/plumb, etc.?  I've had a hard time with this. Thanks David Vespoint Huys Questions: My local Rockler shut down and I found myself purchasing the Dark Half Tung oil from the real milk paint company at a steep discount. Never used the stuff but I’ve heard that dark tung oil can help give cherry a patina look without aging. I’m wondering if it can help walnut preserve its dark color over time?Tung oil is supposed to be a pretty durable finish on it own. Have you guys tried using it as part of an arm r seal mix?Thanks again for the help! Jose All of my furniture pieces seem to have glue creep on all the table tops and panels. I switched from using titebond pva to titebond hide glue thinking this would solve the problem. On some newer pieces I built with the hide glue, I can now slightly feel the glue seams after a few weeks. The tops all have biscuits for alignment as well. Could this be a matter of temperature and humidity change from my shop to my house? About 40% humidity in my shop through the use of a dehumidifier. Temperature ranged from in the 50s this past winter to now it's in the 80s. Would you sand the seam lightly with 0000 steel wool or very high grit sandpaper? And any tips for future builds to avoid this again? Thanks guys! Jeff

    59 min

  5. 18 OCT

    Miter Station Size? Catastrophic Failures, Outdoor Finishes and MORE!!!

    This Episodes Questions: Guys Questions: Gentleman, Chris here @custom_by_chris on Instagram. My shop is a single car garage roughly 11.5’ wide by 22’ long. I’d like to build a miter station along the front wall for my Kapex. Will I regret confining myself to that 11.5’ width? I would position the saw so I have at least 8’ of cutting capacity to one side. I am not doing regular trim work  so don’t frequently deal with long stock.  Lastly, when designing and building the miter station what features would you  consider must-haves or things that aren’t necessary? It’s easy to get sucked into the YouTube rabbit hole of miter stations so please guide me back to the light. Chris Zach from Minnesota here. I recently constructed a box using box joints for the first time (thank you, I hold the applause.) As the tutorial by wood magazine suggested, I cut the fingers a little long with the intention of trimming them later rather than risking them being slightly too short. I have come across numerous suggestions regarding the best way to trim flush these protruding fingers, and as with most things to do with woodworking every suggested method also includes a comment claiming that following any of the other suggestions will ruin my work piece. What method do each of you prefer to use when flush trimming your box joints? Thanks in advance.Sincerely, Zachary T Owens Hi Guy and other guys,Thanks for the great podcast. I have learned a lot from all the great content you put out. I really appreciate your advice and perspective. I have a couple questions I was hoping you could answer.Recently I was rubbing a beeswax and tung oil finish on a little box I made for my mother in law. I was using a white scotch bright pad. I guess I didn't softened one of the corners enough because the pad caught the grain and torn out a little piece of edge. My question is what do you do if something catastrophic happens while finishing? Do you sand it back repair it and then finish again? Do you have to sand the whole thing back or just the piece you are repairing? Or is there some trick to repairing finished wood? Or do you just trow it in the fireplace curse a lot and start over?Thanks. Keep up the great work. Jon Moch Huys Questions: Hey guys, longtime follower and still enjoy listening to the podcast. Guy, it seems like you’ve fallen out of love with woodworking a bit and moved onto 3d printing? Is that just because you’ve been doing it forever haha? Always good to have a change. I wanted to ask you guys about pigmented conversion varnish. I often hear you talk about it and I’ve never heard of it mentioned here in the uk across the pond, the only thing I can find online is it’s potentially the same as what we call acid catalyst? Is it dangerous to spray? Here in the UK acid catalyst (or commonly called AC) is quite toxic and you have to be in a proper booth with serious fume extraction and prober PPE respirator. Is this the same stuff? I’m guessing a pigmented conversion varnish would be a paint finish? Such as a solid colour? Any info would be great.Keep up the great work guys, Mike Hey guys thank you for all the information in the podcast and your previous answers to questions.  For the most part I make sawdust.  I build some furniture pieces, picture frames, boxes, etc.  I also build some shipping crates for my real job which helps offset some of the cost of this hobby.  The crates use 4x4, 2x8, 2x10 & 2x4 construction lumber and plywood.  I've been using a sliding compound miter saw to cut up the boards.  I'm reorganizing my garage and was thinking of selling the miter saw and going back to a Radial Arm Saw.  I do not do any type of trim work or anything like that.  Am I making a mistake wanting to go to the radial?  It would just be for breaking down the boards to length. Thanks, Doug Hi everyone,Pretty much a novice woodworker with some questions on sapele. My primary question: I have a sapele front door that I inherited that has a finish

    44 min

  6. 4 OCT

    Cheaper Tools?, No Tablesaw?, Glues in the Shop and MORE!!!

    This Episodes Questions: Brians Questions:Hey guys!  Another quick question that I get from others in our field. And I'm interested in your input.   What making basic shaker/frame and panel  cabinet doors, I use the big box, larger ridged router with the FREUD T&G bit set.  I'm tired of cutting the tongues and having blowouts..even when using a backer board when running the rail through the router.    I've leaned in to using the BEADLOCK system from rockler.  It's been great so far.   Would you suggest that loose tenon joint, or stick to the TONGUE in the groove? For durability? Crafted Carpenter What are some tool under $50 that you (or listeners) love. My examples:-The Rockler or Milecraft center marking tool-Temtop S1 Indoor Air Quality Monitor (cheap, accurate, see what’s actually happening in your shop instead of guessing)-Any router coping sledGeorge Guys Questions:Hi guysIn two pervious shows you mentioned two things.One. You would give up your table saw in favor of a band saw. The question is what can you do on a table saw that you can not do on a band saw. The only thing I can figure is a Dado joint.Many thanks,Paul MitchellOki Mitch Crafts Good day gentlemenLong time listener (3-4 years) and still feel your the best woodworking podcast.  I build a variety of wood project from band saw boxes to use up scrap pieces  to some furniture. I have a Domino DF 500 and use it often.  You talk about a biscuit joiner being a different animal and used for different things.  Can you give us examples where a biscuit joiner is the best choice?  The examples may answer this question for me but do I need a biscuit joiner?  Which brand(s) would you recommend?Thank You Dean Huys Questions:Where do you purchase your shellac flakes? Do  you use unwaxed? Thanks Mark Moeller Hey guys. As always, appreciate the podcast and the information shared.I thought as a topic you might discuss what glues you keep on hand (types more than brands) as well as what specialty glues you’ll acquire for a specific project or technique.For example, I keep regular wood glue (partial to Gorilla Wood Glue) for most usage, but I always have liquid hide glue for any sliding joint, like dovetails or box joints. I keep 5 minute epoxy and CA glues, but use them less often (and often wish I hadn’t because they’re usually to fix a mistake).  Thanks again.Peter

    52 min

  7. 21 SEPT

    Pocket Screw Spacing, 3D Printers In The Shop, Comtractor Saw Rebuild and MORE!!!

    This Episodes Questions: Brians Questions: Hello guys,Love the podcast. Thank you for your time and expertise!Question on making drawer boxes and other situations where butt joinery is used. How much of a difference would it make if I do not use any glue and rely only on pocket screws / regular screws? Main reason I am asking about skipping glue is because I usually use 2 side prefinished plywood to make drawer boxes so unless I figure out how to remove the finish where the joints are, it will not really stick. Follow up question. What’s the rule of thumb on how to space pocket screws? Let’s say I have a drawer box that’s 12 inches high. How many  pocket screws would I put on each butt joint?MaxGreddie Woodworks I’m building a very large display case for a museum, about 15 feet long and 4 feet high and 6 inches deep. Kind of like a giant shadow box. It will contain a canvas replica of the Shroud of Turin, with LED backlighting behind the shroud canvas and a ¼” glass front (2 sheets of glass with a seam in the middle). The back panel will be either 1/4" or 1/2" plywood. We will have legs under it to support the weight across the 15 foot length, as it will be very heavy once fully assembled on-site. Here’s my question; is it realistic to plane, cut, and sand a 15 foot long 6/4 board, about 6 inches wide?   Am wondering if I could realistically handle such a board, and if so, would it remain flat and straight over time.   Or, would I be better off making two 7-1/2 foot long boards and somehow joining them together to make one 15 foot long board. If two boards, what’s the best method for end-to-end joining of these boards to get a barely-visible joint and a perfectly straight assembly. Do I need to be concerned with sag in the middle if I have a plywood back panel? Mark Guys Questions: I have recently started using Arm-R-Seal and I am new to using finishes with long curing times. I have been prefinishing all my parts because I assume it's near impossible to get a nice finish after glue up. Is this correct? How long should I wait after applying the finish before glueing? Also, if the piece of furniture was for a customer, would you wait the full 30 days of cure time before delivery? Jeffrey Hughes I teach a beginning woodworking class at a High School. I will be receiving two Bambu Lab X1 3D printers for one of the Engineering classes that I teach as well. I know that 3D printers can be very useful for woodworking and was wondering what ideas you would have to share for helpful tools or accessories that could be made using the 3D printer? Also do you have a specific website where you go to find premade tools and accessories that is trustworthy? Thanks in advance for any information that you could provide. Scott Kirkman Huys Questions: Hey it’s me again,I have a 10” Metabo contractor saw I use for my house projects and finer pieces. It’s a quick and dirty saw that I can set up and knock down and roll into the corner. I love the wide table of it but it’s starting to feel wobbly when making cuts. Thinking of building a box around it to have out all the time and catch dust and shavings. Maybe on wheels? I’m no contractor so maybe I should just invest in a cabinet saw… love to hear thoughts. Ian Hello,I am getting ready to build a box beam to wrap an exposed LVL beam in the great room of our vacation home.  It's a horizontal beam with about 2" protruding from a finished wall (drywall).   The span is about 14', and the beam is about 4 1/2" tall.  I will be using knotty pine to create a 3 sided box beam with mitereed corners.    My challenge is that I cannot built and transport 14' beam, so I need to build 2 7' beams. Each end of the beam will butt against a wall, so there isn't much room.   So my question for you all is what type of joinery would you use to seam the 2 beams together on-site?Thanks, and I appreciste what you all are doing for the woodworking community. John

    56 min

  8. 6 SEPT

    Track Saw Value?, Choosing Grain, Benchtop Finish and MORE!!

    Brians Questions: I craft Shaker Furniture and then donate it.  I am often gluing up tabletops.  I have seen many discussions around "how to properly joint" the edges of a-joining boards. Am typically using plain sawn cherry.After rough dimensioning, jointing, then planing the individual pieces, and arranging the pieces so they look nice, and hopefully having  the grain run the same way (I finish the tops with a smoothing plane), it comes time to joint those edges that are to be glued.There in lies the question....does one 1) rip them on a table saw, or 2) joint the edges such that there is a slight bow to allow compression in the center, or 3) take the pair of boards to be glued and joint them together in a book match style.   I usually do 3) I then clamp them using  footed bar clamps and cawls over the top.How do you all handle this part of the process.   1), 2),3)....something else??Secondly, I use hide glue to glue the joinery, but have had trouble using it for table top gluing up table tops --not enough open time...use titebond instead....have you had success in using hide glue for tabletop glue up??thank you, John Hi,I am a hobbyist woodworker who uses a mix of hand tools and power tools. I see a lot of people nowadays using track saws where I would normally use my table saw or my circular saw with a guide. What am I missing with the track saw trend? Won’t a simple plywood guide and cheap circular saw do the exact same thing as a track saw? Thanks Adam Guys Questions: Hi,I enjoy the podcast, it is favorite woodworking podcast where you get right to the point and answer real questions without a lot of wasted time.  Keep it up!I am currently working on a fairly large cabinet & desk built-in.   It will be an "L" shape, run along one wall for about 18 feet, and then wrap around and extend out about 6 feet, with the  corner being the desk section.  I've already completed the base cabinets, so the next step will be the desktop, followed by all the shelving.My question is about the desktop(26in deep).  My plan was to build this in 6 foot sections, which I would then join to span the whole wall.  I've been going back and forth over whether I build this out of solid wood(thinking 8/4 rough sawn which I would mill down to maybe 1-1/2in), or using veneers.  I planned to join each section using a Lamello Zeta P2.   I have access to the tools(6cfm pump from Veneer Systems) to do either method, but am not sure if one is really much better.  I'be been leaning towards solid wood(Walnut) as I have that on hand, but not sure if that's more of me shying away from using veneers as I don't have a lot of experience on bigger projects.  This is for my home so may be an opportunity to get more practice using veneers without worry of it being a customer piece.  I'm interested in what you would recommend.Thanks! Frank Also a dummy, thank you Bob for opening the can of worms. Who cares if it is 1/4 sawn or 1/64th sawn?When is it important to know? If riff sucks…then why use it or if  plane is plain to unstable to use why use it etc. Strengths and weaknesses for price versus application might be interesting to discuss, especially if opinions can vary.What is the wheelhouse for the different boards?  I imagine it’s a combo of beauty, price and stability. Can you guys flesh out this conversation a bit? Benjamin Huys Questions I use Kreg work bench system so my benches are mostly straight and strong with the factors I stated above. I also am lazy or forgetful about putting down paper before glue ups. replacing the top of the work bench I have considered finishing it with thin layer or epoxy to allow a non-sticky surface for the wood glue or finishes I use.  I am also going to make match fit dove tail clamp system ( would finish with epoxy then have the cnc redue the job to clean the channels ) maybe also with dog hole.is the epoxy finish a good way to make a more permeant bench top ? should I just lay down plywood top and replace when

    58 min
See All (100)

4.9
out of 5
17 Ratings

About

Bi-Weekly Podcast Focused on the Craft of Woodworking

Information

  • Creator
    Woodshop Life Podcast
  • Years Active
    2018 - 2024
  • Episodes
    100
  • Rating
    Clean
  • Copyright
    © Copyright 2024 All Rights Reserved
  • Show Website
    Woodshop Life Podcast

You Might Also Like

To listen to explicit episodes, sign in.

Stay up to date with this show

Sign in or sign up to follow shows, save episodes and get the latest updates.
Select a country or region

Africa, Middle East, and India

Asia Pacific

Europe

Latin America and the Caribbean

The United States and Canada