CADCAST

Nick Sweeney
  • 5,0 (6)
  • TECHNOLOGIES
CADCAST

CADCAST is your all-CAD podcast. On this show, Nick Sweeney takes you around the world of CAD to talk about SOLIDWORKS, PDM, 3DEXPERIENCE, 3D Printing, Simulation, and everything in between. Guests will be a fixture on the podcast as well. We'll be bringing in professionals from GoEngineer and all around the Dassault channel community.

  1. 09/03/2023

    What CAN'T You Automate?

    I finally got Paul Gimbel on the podcast! This week, Paul joins the show to talk about his adventures as a DriveWorks implementer, and some of the coolest things he's done with the tool. Stay tuned for some great reasons why you should attend DriveWorks World 2023 and what sessions you can look forward to.The projectile project Paul and I mention was done by Wade Anderson. Sorry, Wade, we couldn't remember it was you when we recorded it!Follow me on LinkedIn: Nick Sweeney

    40 min

  2. 01/03/2023

    3DEXPERIENCE World 2023 Recap with Darin Grosser

    Back for 2023 with a new episode recapping 3DEXPERIENCE World 2023 in Nashville! We had a ton of fun in Nashville with everyone and learned a lot about the future of the Platform and the strength of the community. Tune in to find out what Darin and I took away from the conference and what's coming in 2023 to get excited about! We're excited for Dallas in 2024!Follow GoEngineer on LinkedIn

    37 min

  3. 21/12/2022

    How Many Unicorns Actually Exist? - SOLIDWORKS PDM 2023

    It's a valid question and one that Nick posed when talking about SOLIDWORKS PDM 2023. But Jeff's back for another episode because who else would be the guest for a SOLIDWORKS PDM 2023 discussion? Find out which enhancement neither of us originally included in our top 5 enhancements but is probably the best one of the entire bunch!Be sure to check out Nick's What's New in SOLIDWORKS 2023 blog that he referenced throughout the show.Happy Holidays!

    32 min

  4. 30/11/2022

    Simplifying "Swoopy Curvy Parts" with SOLIDWORKS 2023

    We're back with a new episode! This week, Brian Reel, our director of design engineering solutions, joins the show to talk about his 5 favorite enhancements in SOLIDWORKS 2023. The best part? These are 5 examples that almost everybody is going to love and they will make your models way easier to work with.

    38 min

  5. 14/09/2022

    Imagining a World Without Printers - 30 Years of Data Management

    Can you imagine never needing to get ink cartridges for that annoying printer ever again? That would be amazing! Well, 30 years ago, nobody was thinking that way. In fact, we've gone from needing paper copies of every drawing to using things like Google Photos to store our family photo albums!This week, Joe Frank and Jeff Sweeney return to the podcast to talk about the past, present, and future of data management. Tune in for a fun conversation about how much life has changed and to find out ...

    38 min

  6. 31/08/2022

    From Bag Phones to Electrical Schematics

    I'll admit it, I honestly wasn't aware that bag phones were a thing in the 1990s... But what I am aware of is SOLIDWORKS Electrical and how it makes schematic designs in 2D and 3D much easier than it was 30 years ago when we had to draw everything on paper! This week, Corey Kubichka joins the show to talk all about SOLIDWORKS Electrical, where it's been, and where we're excited to see it over the next 30 years!

    31 min

  7. 03/08/2022

    Got a Headache Yet?

    Making the decision to move to a new CAD tool can be difficult. What are you going to do with all that legacy data? What about the new system, will it handle your files cleanly? Luckily, if you're looking at transitioning to a Dassault tool, we've got you covered. This week, Brandon Nelms and Keith Schaefer join the show to talk about how you can prepare to transition to a DS tool and what kinds of things you should be doing as you prepare for any kind of system change!

    37 min

  8. 06/07/2022

    We Aren't Gonna Rage Quit Our CAD

    I promised this a while back and we're finally getting around to putting this episode out there. This week, James Reeher joins CADCAST to talk with me about large assembly performance, video games, and why you shouldn't rage quit your CAD software. Sometimes, having the right tool for the job is all you need.Linus Tech Tips SOLIDWORKS hardware video

    41 min
Tout afficher (72)

Bande-annonce

5
sur 5
6 notes

À propos

CADCAST is your all-CAD podcast. On this show, Nick Sweeney takes you around the world of CAD to talk about SOLIDWORKS, PDM, 3DEXPERIENCE, 3D Printing, Simulation, and everything in between. Guests will be a fixture on the podcast as well. We'll be bringing in professionals from GoEngineer and all around the Dassault channel community.

Informations

  • Création
    Nick Sweeney
  • Années d’activité
    2020 - 2023
  • Épisodes
    72
  • Classification
    Tous publics
  • Copyright
    © 2023 CADCAST
  • Site web de l’émission
    CADCAST

Pour écouter des épisodes au contenu explicite, connectez‑vous.

Recevez les dernières actualités sur cette émission

Connectez‑vous ou inscrivez‑vous pour suivre des émissions, enregistrer des épisodes et recevoir les dernières actualités.
Choisissez un pays ou une région

Afrique, Moyen‑Orient et Inde

Asie‑Pacifique

Europe

Amérique latine et Caraïbes

États‑Unis et Canada