electronics.dev

All things coding electronics

The latest news, insights and discussion around building electronics with code. electronics.dev

  1. Why PCB Auto-Routing Is Harder Than You Think (And How AI Might Fix It)

    8월 21일

    Why PCB Auto-Routing Is Harder Than You Think (And How AI Might Fix It)

    Auto-routing sounds simple: connect the traces, hit “go,” and let the software handle the rest. But in reality, PCB auto-layout is one of the hardest problems in electronics. In this episode of electronics.dev, Seve (founder of tscircuit) and Matt (founder of atopile) break down why auto-routing is so difficult: from impedance matching and creepage rules to high-speed signal integrity and noise coupling. They also explore the new wave of AI-driven solutions and whether they can finally deliver on the promise of hands-free PCB layout. Along the way, the duo dives into: * Why traditional auto-routers often fail on complex boards * The trade-offs between speed and quality in modern routing algorithms * How engineers use SAT solvers and constraint systems to optimize pin assignments * What tools like Quilter and DeepPCB are getting right (and wrong) * Why AI-assisted optimization might work better than full AI-generated layouts * How the future of PCB design could be shaped by deterministic solvers + AI refinement If you’ve ever wondered why PCB design still feels like an art form, and whether AI will finally make auto-routing reliable, this conversation offers an inside look at the problem and the potential solutions. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    58분
  2. Why Custom Chips Are the Next Big Thing in Hardware Design

    8월 11일

    Why Custom Chips Are the Next Big Thing in Hardware Design

    Custom chip design is no longer reserved for billion-dollar tech giants. In this episode, Seve (founder of tscircuit) and Matt (founder of atopile) explore how advances in tooling, prototyping, and the EDA industry are making custom silicon accessible to startups, makers, and engineers like never before. You’ll discover: * How Tesla’s early battery management challenges led to unique custom chip solutions * The surprising economics of a $7K run for 5,000 prototype chips * Why most microcontrollers still use massive 90nm processes, and why that works * Analog vs. digital scaling: where Moore’s Law still applies and where it doesn’t * Funding trends in hardware startups, from Diode to SnapMagic * The state of open-source electronics after the OpenSauce conference * CNC milling “micron accuracy” claims: myth vs. reality * Why PCB milling often isn’t worth the time for serious prototyping Whether you’re a hardware engineer, startup founder, or electronics enthusiast, this conversation pulls back the curtain on the tools, economics, and decisions shaping the next generation of hardware. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    35분
  3. How AI Will Revolutionize PCB Design Faster Than You Think

    7월 10일

    How AI Will Revolutionize PCB Design Faster Than You Think

    AI Isn’t Coming For Electronics Design. It’s Already Here. Matt (founder of Atopile) and Seve (founder of TSCircuit) return with a deep dive into the rapidly shifting world of electronics and mechanical design. In this episode, they discuss how AI is reshaping every part of the hardware stack: from PCB layouts to robotic assembly. What you'll learn today: * Why "arms in a box" robotics startups are booming * How Meta’s world models might replace control loops * The explosive growth of synthetic data for training AIs * Why OpenCascade and legacy CAD tools are holding engineers back * The rise of custom, code-native CAD kernels like Zoo * The power of constraint-based design thinking * Could text-to-CAD finally be useful in real workflows? * Why betting on “X as code” years ago is paying off now Whether you’re a hardware engineer, an AI researcher, or a curious builder, this conversation reveals the core changes happening right now in how electronics are designed. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    37분
  4. The Future of Circuit Boards: Code, Constraints, and LLMs

    7월 5일

    The Future of Circuit Boards: Code, Constraints, and LLMs

    In this episode of electronics.dev, Seve (founder of tscircuit) and Matt (founder of atopile) break down a quiet revolution in electronics: designing circuit boards with code and compiler-like workflows, not traditional schematics. They dive into: * Why traditional EDA tools limit innovation * How constraints, templates, and AI are unlocking more expressive, testable circuit design * The surprising overlap between web layout (CSS) and PCB layout * How tools like atopile let you think in relationships, not in traces * What “spatial reasoning” really means for engineers, and why half of us may be bad at it * Why autonomous layout and reference design matching will change everything Along the way, the duo shares reflections on: * The enduring power of sketching in engineering * Using AI as a design partner (and critique engine) * How mechanical and electronics design differ, and what each can learn from the other * Why circuit fabrication is standardized, but placement logic is still tribal knowledge If you’ve ever written hardware configuration code, fought with schematic tools, or dreamt of a world where hardware is as programmable and composable as software, this episode is for you. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    35분
  5. Inside a North Korean Missile: What Chips Are Inside?

    6월 23일

    Inside a North Korean Missile: What Chips Are Inside?

    Seve (founder at tscircuit) and Matt (founder at atopile) tear into the wild intersection of geopolitics and hardware as they explore a North Korean KN-23 ballistic missile teardown. This episode reveals how Western components still end up in restricted military tech, and how second-hand supply chains blur the line between hobby electronics and weapons of war. But the conversation doesn’t stop there. From chip smuggling to the future of prototyping, this episode explores how electronics shape everything from missiles to laundry robots. What You’ll Learn Today: * How NXP, Analog Devices, and Fairchild chips wound up in a North Korean missile * The surprising link between PlayStation 2 and military supercomputers * Why chip reverse engineering is rarely worth it, unless you're a rogue state * How China is trying (and struggling) to close the chip tech gap * Why ASML is a single point of failure for the global chip industry * The future of humanoid robots and open-source robotics startups * A new “jumperless breadboard” that redefines prototyping * A wild idea for a fully automated PCB assembly shop Whether you're into defence tech, microcontroller ecosystems, or the nerdy tools reshaping prototyping and manufacturing, this episode will blow your mind! This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    41분
  6. The Desktop PCB Revolution Is Here!

    6월 17일

    The Desktop PCB Revolution Is Here!

    Are we finally close to fabbing real PCBs at home? In this episode, Seve (tscircuit) and Matt (atopile) go deep into the state of DIY PCB fabrication: why it feels like the early days of 3D printing, what's still holding it back, and what could push it over the edge. We talk lasers, vias, copper, tariffs, and some surprising hacks people use to prototype faster without sending things to China. What You’ll Learn Today: * How fiber lasers are being used to blast copper off PCBs * Why vias are still the bottleneck for DIY PCB prototyping * What a $200K laser ablation machine actually does * How one engineer claims to make PCBs with no chemicals at all * Whether DIY sintered copper vias might actually work * How U.S. tariffs sparked a wave of fake “local” PCB fabs * Why 3D printing and PCB fab might follow the same path * What still needs to happen before in-house PCB manufacturing is truly usable Whether you're building hardware, designing boards, or just wondering what’s next for fast prototyping, this is one of our most technical and fun episodes yet. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    1시간 4분
  7. Building PCBs with Code is The Future of Hardware Design

    6월 3일

    Building PCBs with Code is The Future of Hardware Design

    Join Seve (founder at tscircuit) and Matt (founder at atopile) for a no-fluff conversation about the future of electronics design. In this episode, the founders dive deep into: * Why designing PCBs with code is better than legacy schematic tools * How Chinese factories like JLCPCB dominate with software automation * The hidden costs of tariffs — and why they don’t actually help US manufacturing * Why open-source hardware and standards like ODB++ and IPC are a mess * Real talk on US vs. Chinese PCB fabs, and what needs to change Whether you're a hardware engineer, startup founder, or just curious about how electronics are made, this episode is packed with firsthand insights, rants, and laughs. Bonus topics: * Automating your business taxes with AI * What “open source” really means in 2025 * The surprisingly painful experience of launching a landing page This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    33분
  8. The Hard Lessons of PCB Auto-Routing: Part 2 of Seve's List

    5월 19일

    The Hard Lessons of PCB Auto-Routing: Part 2 of Seve's List

    Seve's original post Part 1 episode This episode continues where the last one left off, diving into Part 2 of Seve's blog post “13 Things I Wish I Knew Before Building an Autorouter.” 🧠⚡ Seve (founder of tscircuit) and Matt (founder of atopile) explore the deep technical challenges of auto-routing printed circuit boards using code, compiler toolchains, and caching, rather than traditional schematics-based tools. In this second half, they unpack: * Why caching is crucial for speeding up PCB auto-routing * Visualization as a debugging superpower * The power of PyInstrument and visual profiling tools * Why recursive functions and Monte Carlo methods often fail in optimization * Game dev tricks (like greedy A*) adapted for PCB pathfinding * The difference between grid-based vs intersection-based routing math * Why keeping results grounded in physical space (like millimeters) makes debugging easier * Using animation to catch stupid behavior before it goes live * How a meta-router manages multiple strategies in parallel * Insights from CNC machines and high-fidelity spatial modeling This episode is packed with Seve and Matt's hands-on experiences, hard-won insights, and sharp advice for anyone building or using modern, code-first electronics design tools. 🛠 Whether you're a PCB engineer, systems architect, or startup founder in the hardware space, this conversation is pure gold. This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit electronics.dev

    28분
모두 보기(44개)

평가 및 리뷰

소개

The latest news, insights and discussion around building electronics with code. electronics.dev

정보

  • 제작진
    All things coding electronics
  • 방송 연도
    2024년 - 2025년
  • 에피소드
    44
  • 등급
    전체 연령 사용가
  • 저작권
    © Severin Ibarluzea + Matt Wildoer
  • 웹사이트 보기
    electronics.dev