End of the Line

Engineering.com
  • 0.0 (0)
  • TECHNOLOGY
  • UPDATED WEEKLY
End of the Line

In this op-ed, manufacturing veteran and host James Anderton expresses his compelling and unique opinions about the state of the manufacturing sector. He shares his thoughts and insights to help engineering and manufacturing professionals navigate through the challenges of world events, supply chain issues, the blending old with new technologies, evolving processes, gaps in skilled labour, in an effort to help maximize engineering productivity of their daily operations. James is a former editor of trade publications in the automotive, metalworking and plastics industries with contributions to a wide range of print and on-line publications. He also brings prior industry experience in quality and manufacturing for a Tier One automotive supplier. New episodes uploaded weekly. You can also watch these podcasts as videos on engineering.com TV: https://www.engineering.com/viewAll?category=end-of-the-line

  1. 19 SEPT

    Additive manufacturing: Ukraine's game changer?

    3D printing, or additive manufacturing as it’s known in the industry, have revolutionized warfare, as seen in the current Ukraine Russia conflict. The ability to mass-produce first-person view drones in the thousands has created a new battlefield, where traditional doctrines about armor and logistics have been changed forever. Not only do the drones make attacking armies more vulnerable, additive manufacturing allows production to be extensively decentralized, making it much harder for adversaries to degrade production capability. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    5 min

  2. 13 SEPT

    Scaled Composites’ Vanguard may be the 21st Century equivalent to the Cold War F-5

    Northrup Grumman subsidiary Scaled Composites have created a small single-pilot fighter jet, the Vanguard. It could be the 21st century version of the the 1960's F-5 Freedom Fighter:  low cost, but high-performance. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    4 min

  3. 3 SEPT

    Are there too many space launch providers?

    The market for orbital launch services is considerable, but limited. Is the room for all the players? * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    4 min

  4. 30 AUG

    Can AI fix Aviation, and Boeing?

    As software controlling everything from video games to jet airliners has become too complex to make completely error proof, the move to increasing flight automation continues to carry risk. No one knows this more than Boeing, but the fundamental problem of systems that are too complex for humans to check means that safety may ultimately be handed over to artificial intelligence. First, for checking human generated code, then permitting the code itself, and finally, the piloting of the airplanes themselves.  * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    4 min

  5. 23 AUG

    Boeing’s, and NASA’s Dilemma With Starliner

    There is plenty of talk in the mainstream media about the technical issues with the Boeing Starliner spacecraft, but the real engineering issue is not rooted in pressure vessels, valves or lines. It’s management. Starliner has launched previously to the international Space Station uncrewed, so the capability for fully autonomous flight exists at Boeing. The current flight was configured for human piloting, so the obvious option for Williams and Wilmore, which is to bring them back with a SpaceX capsule, may become necessary if NASA and Boeing can’t reconfigure Starliner to work around the thruster issues. The zero risk option? Fly the astronauts back by SpaceX, then fly Starliner back empty, fix the issues, and launch it again. If Starliner returns unharmed, the decision will look like an abundance of caution, but all concerned will come out looking good. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    4 min

  6. 11 JUL

    The Facetmobile Light Airplane: Why Didn't it Ever Take Off?

    Barnaby Wainfan designed a radically different lifting body light aircraft over 30 years ago, that exhibited superior performance in almost every metric: speed, lifting capacity, interior volume, stall performance and centre of gravity tolerance. It’s also cheap and easy to build. His designs are much talked about at the annual Oshkosh fly in for aviation enthusiasts, yet major aircraft manufacturers seem to be allergic to his innovations. Despite advantages in almost every metric relevant to light aircraft design, the industry appears wedded to conventional wings and fuselage design. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    4 min

  7. 10 JUL

    3D Printing: When Does This Technology Deliver on Its Promise?

    Very few technologies in manufacturing have ever offered as much as 3D printing. Additive manufacturing is revolutionary in the way that computer numerical controlled machining was 50 years ago, and for some high-value industries, it’s a standard production tool. But it’s been around for over 25 years in usable forms, and in the high-volume mass production consumer goods that we all use, additive manufacturing has yet to emerge as a production process. Jim Anderson spoke with industry leader Glynn Fletcher, President of EOS North America at the 2024 RAPID/TCT additive show in the Los Angeles about the challenge and future of additive as a production technology. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    9 min

  8. 21 JUN

    Tailgates were better in the 1970's

    Before there were SUVs, there were station wagons, and millions of families loved the fake wood panelling, roof rack, but importantly, a comfortable ride with plenty of hauling capacity. In the age before the SUV, this was a hotly contested market for the Detroit Three. Ford claimed to own this segment, and a major selling feature was their innovative two-way tailgate, which flipped down like a pickup truck, or could open like a car door, courtesy of a very clever hinge and latch arrangement. And how did General Motors respond? With a system so clever and useful, that the gimmick laden tailgates of today’s SUV’s and light trucks don’t even come close. * * * Want to watch this podcast as a video? End of the Line is available on engineering.com TV along with all of our other shows such as This Week in Engineering, Designing the Future, and, Manufacturing the Future.

    3 min
See All (162)

About

In this op-ed, manufacturing veteran and host James Anderton expresses his compelling and unique opinions about the state of the manufacturing sector. He shares his thoughts and insights to help engineering and manufacturing professionals navigate through the challenges of world events, supply chain issues, the blending old with new technologies, evolving processes, gaps in skilled labour, in an effort to help maximize engineering productivity of their daily operations. James is a former editor of trade publications in the automotive, metalworking and plastics industries with contributions to a wide range of print and on-line publications. He also brings prior industry experience in quality and manufacturing for a Tier One automotive supplier. New episodes uploaded weekly. You can also watch these podcasts as videos on engineering.com TV: https://www.engineering.com/viewAll?category=end-of-the-line

Information

  • Creator
    Engineering.com
  • Years Active
    2020 - 2024
  • Episodes
    162
  • Rating
    Clean
  • Copyright
    © Copyright 2024 Engineering.com
  • Show Website
    End of the Line

To listen to explicit episodes, sign in.

Stay up to date with this show

Sign in or sign up to follow shows, save episodes and get the latest updates.
Select a country or region

Africa, Middle East, and India

Asia Pacific

Europe

Latin America and the Caribbean

The United States and Canada