Measurement Science

Delft University of Technology
  • 5,0 (1)
  • CURSOS
Measurement Science

Delft University of Technology on iTunes

Episódios

  1. 04/06/2013 · VÍDEO

    Measurement Science: 7. Measurements instruments II

    EE1320. When measuring the current, the amplitude of AC signals can be defined in several ways, and the basic principles of the oscilloscope are important. Time and frequency measurements are explained, as well as how a comparator can be used to remove amplitude information in these measurements.

    1h30min

  2. 29/05/2013 · VÍDEO

    Measurement Science: 6. Measurements instruments I

    EE1320. Three types of measurement instruments are discussed: Voltage, current and resistance measurements. Concepts such as tracking errors, reflections and 4 vs. 2 point measurements are illustrated.

    1h29min

  3. 21/05/2013 · VÍDEO

    Measurement Science: 5. Analog-to-digital convertors

    EE1320. The basic principles of sampling and quantization in digital analog conversion is discussed, as well as three important ADC types: Direct (Flash ADCs), integrating(Dual-slope ADCs), compensating (Successively-approximating ADCs).

    1h22min

  4. 14/05/2013 · VÍDEO

    Measurement Science: 4. Instrumentation amplifiers

    EE1320. Before discussing how three opamps can be combined in a circuit to form an instrumentation amplifier, balance measurements (wheatstone bridge) and the importance of the common mode rejection ratio are explained.

    1h35min

  5. 07/05/2013 · VÍDEO

    Measurement Science: 3. Sensors readout and signal conditions

    EE1320. Signal conditioning is needed to adjust the output signal of the sensor to the input of the Analog Digital Convertor. Opamps are discussed as suitable building blocks for sensor readout. However, their non-ideal properties influence the transfer.

    1h16min

  6. 26/04/2013 · VÍDEO

    Measurement Science: 2. Sensors

    EE1320. Different types of sensors are discussed. Sensors allow transduction to the electrical domain, distinguishing between (self-generating /modulating) and (direct / tandem transduction). Types of sensors which are discussed are: resistive, capacitive, inductive, thermoelectric, piezoelectric, and semiconductors.

    1h28min

  7. 24/04/2013 · VÍDEO

    Measurement Science: 1. Introduction to measurement and measurement systems

    EE1320. Introduction to measurement technology and measurement systems. A general overview of concepts in the course is given. And important aspects such as calibration and measurement uncertainty are explained. The anatomy of the measurement system is also discussed, introducing the conversion of data acquisition to a usable output signal, and deviations which can occur in this transfer.

    1h34min
  • 7 episódios

Sobre

Delft University of Technology on iTunes

Informações

  • Criado por
    Delft University of Technology
  • Episódios
    7
  • Classificação
    Livre
  • Copyright
    © Delft University of Technology
  • Site do podcast
    Measurement Science

Mais de Delft University of Technology

Para ouvir episódios explícitos, inicie sessão.

Fique por dentro deste podcast

Inicie sessão ou crie uma conta para seguir podcasts, salvar episódios e receber as atualizações mais recentes.
Selecionar um país ou região

África, Oriente Médio e Índia

Ásia‑Pacífico

Europa

América Latina e Caribe

Estados Unidos e Canadá