3D Printing Projects

Adafruit Industries

Get inspired to use 3D printing in your projects and find out how to design things using CAD software.

  1. 19.11.2025 · VIDEO

    eInk Slow Movie Player

    Build a slow movie player with Adafruit's E-ink bonnet and a 7.5in monochrome e-ink display. Guide: https://learn.adafruit.com/eink-slow-movie-player With custom dithering, you can adjust it for animation or live-action films - we think it’s a great way to take a deeper appreciation of cinema. This project was inspired by Tom Whitwell's slow-movie project. Our build features a custom 3d printed enclosure designed to fit the Adafruit Bonnet, a 7.5in e-ink display and a Raspberry pi 5. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

    2 min.

  2. 05.11.2025 · VIDEO

    No-Code Pool Party Notifier

    Build an internet-connected pool notifier to alert the neighborhood that the pool party is underway! Guide: learn.adafruit.com/pool-party-notification-device In this guide, you'll use Adafruit IO and WipperSnapper firmware to build a pool party notifier that raises a flag and displays a message on an E-Ink screen. This project can be completed without programming or soldering. When your pool is ready for guests, press a button on the Adafruit IO dashboard to send the flag up. We've also designed a 3D-printed enclosure to house the project. You can print the enclosure or pick one up from the Adafruit shop! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

    2 min.

  3. 29.10.2025 · VIDEO

    Mac Classic Fruit Jam

    You can build your own Apple Macintosh Classic inspired mini computer with Adafruit's Fruit Jam and 3D printed parts. Full tutorial, files and code at: https://learn.adafruit.com/mac-classic-fruit-jam Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

    2 min.

  4. 08.10.2025 · VIDEO

    MagTag 2025 + Case

    The MagTag 2025 edition has all the same features but now has a new chip driver with support for Arduino and CircuitPython. https://www.adafruit.com/product/4800 With the new SSD1680 chip driver on the 2025 edition, you’ll want to install the latest stable release of Circuit Python, version 10.0. The new case has ample room for a 500mAh lipo battery (or smaller) and mounting holes for M3 hardware like these mini magnet feet. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

    2 min.

  5. 01.10.2025 · VIDEO

    No-Code Indoor Grow Monitor

    Low-cost, easy to build IoT device to remotely monitor your indoor crops or exotic plants Guide: https://learn.adafruit.com/no-code-indoor-grow-monitor The device is designed to be suspended in mid-air, so the no-contact thermometer is pointing towards the leaves or flowers of your plant. The 3D printed case houses a couple of sensors to calculate your plant's photosynthetic photon flux density (PPFD) and vapor pressure deficit (VPD). Knowing these data points can help optimize the yield of your indoor crops Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

    3 min.

  6. 11.09.2025 · VIDEO

    Fusion 360 - Seamless Emboss Patterns

    Learn how to apply a seamless pattern to a spline curve shape using the Emboss feature in Fusion 360. Tutorial by Noe Ruiz for Adafruit Industries

    12 min.

  7. 10.09.2025 · VIDEO

    Rumi LED Sword - Kpop Demon Hunters adafruit 3dprinting

    Seal the Honmoon with Rumi's sword from KPop Demon Hunters! Guide: https://learn.adafruit.com/rumi-sword Powered by the Adafruit TPS61169 Constant Current Boost Converter for LEDs! Two Pink LED nOOds illuminate the blade and handle to create a bright cosplay prop! We designed the sword with steel machine screws to reinforce the 3D printed parts so it's strong and durable, just like the demon hunters. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

    2 min.

  8. 15.08.2025 · VIDEO

    USB MIDI Keyset

    Build a 3D printed vintage synth inspired USB MIDI controller with custom GUI, an OLED, pots, knobs and key switches using CircuitPython and Adafruit KB2040! Learn Guide https://learn.adafruit.com/midi-keyset KB2040 https://www.adafruit.com/product/5302 1.3in OLED Display https://www.adafruit.com/product/938 CHOC Key Switches https://www.adafruit.com/product/5114 Potentiometers https://www.adafruit.com/product/562 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

    2 min.
Se alle (337)

Om

Get inspired to use 3D printing in your projects and find out how to design things using CAD software.

Oplysninger

  • Skaber
    Adafruit Industries
  • Aktive år
    2016 - 2025
  • Episoder
    337
  • Vurdering
    Ikke anstødeligt
  • Websted for serie
    3D Printing Projects

Mere fra Adafruit Industries