Tuned In

High Performance Academy
  • 0,0 (0)
  • AUTOMOBILISMO
  • OGNI SETTIMANA

High Performance Academy Presents: Tuned In. A podcast interviewing influential people from around the world at the top of their respected fields. Covering topics such as Tuning, CAD, Performance Engine Building, Automotive/Motorsport Wiring, Data Analysis, Driver Coaching/Training, Motorsport Fabrication and Car Setup.

  1. 155: Building The Worlds Best Sounding 5 Rotor

    1 G FA

    155: Building The Worlds Best Sounding 5 Rotor

    David Mazzei may well have the best-sounding turbocharged rotary on the planet, but how he chased down that elusive F1 V10 sound with this masterpiece of an engine is somewhat unexpected. Rotary engines are often labelled as temperamental and unreliable, but David Mazzei of Formula Mazzei believes the opposite. In his view, rotaries can be among the most reliable engines when properly understood. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, David shares his journey from a childhood fascination with technology and cars to becoming a rotary engine expert. He discusses the challenges and rewards of owning and daily-driving his first RX-7. We dive deep into rotary tuning, starting with the fundamentals—air-fuel ratios, exhaust gas temperatures, and the critical relationship between ignition timing and engine reliability. David also shares his views on engine building, apex seals, and porting, and explains why rotaries deserve a far better reputation than they’ve been given. We explore the evolution of his five-rotor engine, what it took to bring such an ambitious project to life, and the challenges of building something this complex. David breaks down the science behind its unforgettable sound and reveals how his background in music helped him dial in and replicate the pitch of an F1 V10. David’s passion for the rotary engine is undeniable. He’s a wealth of knowledge, and what he’s achieved with his MF5 Superlite is nothing short of extraordinary. If you have even a passing interest in rotary engines, this is an episode you don’t want to miss. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow David here: Instagram: mazzei_formula Youtube: mazzeiformula Facebook: David Zachary Mazzei Timestamps: 0:00 Building The Worlds Best Sounding 5 rotor 4:11 How did you become interested in cars? 17:20 How did daily driving your first RX7 at 17 go? 21:55 Rotary reliability 29:16 How did you learn to tune?   37:24 Can you explain the different rotary engine ports? 40:15 Driveability with modern ECU’s on a bridge port or peripheral port? 46:15 EGT’s on rotary engines 55:15 Air fuel ratios and timing on rotary engines 1:06:05 Can you explain rotary split? 1:12:33 How did the 5 rotor project develop? 1:23:17 Is the turbo charger irrelevant to the sound of the engine? 1:30:30 How do we go about building a 5 rotor? 1:38:23 Billet vs factory cast blocks 1:42:46 What’s your opinion on apex seals? 1:46:25 Should we be running premix in our rotary’s? 1:53:37 How important is injector timing? 1:57:25 Final 3 Questions

    2 h 5 min
  2. 154: 1000+ HP Diesels to 2JZ Weapons — Chuckles Garage Does It All

    28 GEN

    154: 1000+ HP Diesels to 2JZ Weapons — Chuckles Garage Does It All

    Pikes Peak and land speed record racing couldn’t be more different when it comes to motorsport, and that’s exactly why Scott Birdsall from Chuckles Garage is so interesting. From 1,000+ HP diesel hill climb monsters to a 2JZ-powered, land speed record-holding Toyota Hilux, Scott is into everything cool and fast. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, Scott shares his journey from a childhood passion for cars to becoming a successful automotive entrepreneur. He discusses the importance of his hands-on education through auto shop, and the challenges of navigating a career in the automotive industry. Scott reflects on the founding of Chuckles Garage and what it’s become today. He dives into the wild build story of Old Smokey, a 1949 Ford F1 truck, breaking down the engineering challenges of extreme diesel performance, compound turbo systems, and the brutal demands of the Pikes Peak Hill Climb. After a massive crash at Pikes Peak left the truck beyond repair, we explore Scott’s plans to rebuild the iconic machine—faster and more extreme than ever. We also cover his venture into land speed record racing at Bonnieville, detailing the unique challenges of tuning for wide-open-throttle for long periods of time and the strategies required to achieve record speeds using the 2JZ Toyota platform. Scott’s approach to building vehicles is truly unique. His ability to take an unexpected or unconventional platform and turn it into an insanely fast machine for a specific discipline—while doing it all with his own unmistakable style is simply impressive.  👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow Scott here: Instagram: ChucklesGarage Facebook: ChucklesGarage Youtube: ChucklesGarageOfficial Timestamps: 0:00 1000+HP Diesels to 2JZ Weapons — Chuckles Garage Does It All 3:53 Where did the passion for cars come from?  6:08 What was the first cool car you owned and started modifying?  8:40 What do you learn at an Auto Shop? 10:58 What was your formal education after High School? 18:24 What was your plan to build your passion into a business? 22:40 How did you build your fabrication skills? 27:18 How much of a game changer is a 3D printer? 30:23 Overview on your business today 38:31 How important are Sema level builds for your reputation? 40:00 Tell us about Old Smokey 1949 F1 Ford 44:29 How to make 1400Hp out of a Cummins diesel? 50:20 Are you doing the diesel tuning? 52:14 Why are you using a compound turbo setup? 59:49 How much can you rev these diesel engines? 1:02:10 What are the challenges of racing old smokey at pikes peak? 1:05:06 Tell us about your crash in old smokey 1:14:27 What’s the plan with old smokey from here? 1:18:06 How did you get involved with a land speed record attempt?  1:21:22 2jz Dart block, what are the advantages? 1:22:52 Was there any other engine options for the land speed truck? 1:24:46 How long are you at wide open throttle at Boniville? 1:26:39 Where do you see the advantages of methanol?  1:30:36 How did you figure out how to break the land speed record? 1:35:36 What’s it like to drive at 250mph? 1:42:08 Final 3 questions

    1 h 50 min
  3. Revisited: Want to Get Your Car Handling Better Than Ever Before? Listen to This.

    14 GEN

    Revisited: Want to Get Your Car Handling Better Than Ever Before? Listen to This.

    *** We’ll be taking a break over the Christmas/New Year period and will be back in action mid-January. That means that although there won’t be any new episodes for a few weeks, we’ll be taking another look back at some of our favourite episodes.  *** Are you sick of playing the guessing game when it comes to setting up the suspension and tyre systems in your race or road car? If you’ve ever felt like you’re throwing alignment adjustments, damper settings, and spring rate changes at the pit wall just to see what sticks when making changes to your or your customer’s vehicle, then this episode with Bruno Finco of Optimum G is going to be a perfect listen. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Originally from Brazil and now based in Colorado, unusually for a guest of the Tuned In podcast, Bruno didn’t have all that much interest in cars growing up — it wasn’t until he went to university to gain a degree in mechatronics engineering that he joined the school’s Formula SAE team and began a life-long love affair with all things motorsport. Walking out of university and straight into a role at Colorado-based Optimum G, Bruno has since gone on to become the motorsport tech company’s Lead Performance Engineer, and now spends his time travelling around the world’s greatest race circuits, gathering data, helping both race teams and OEMs optimise their vehicle dynamics, and teaching others how to do the same through the use of Optimum G’s highly-regarded software packages. The bulk of this admittedly very tech-heavy episode consists of Bruno talking us through the many nuanced points of motorsport handling and performance, breaking down concepts into their many facets. This includes roll centre, tyre slip angle, Ackermann steering, anti-dive and squat, plus much more. Bruno also explains how Optimum G’s software works, and most interestingly, despite how it first looks, how it’s not something you need to have a Ph.D. in order to understand and use to substantially improve your vehicle’s performance. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip A more thorough explanation of Ackermann steering can be found here. Find all the resources Bruno mentioned in this episode here. Follow Bruno and Optimum G here: IG: @optimumg, @bruno.finco LI: OptimumG YT: OptimumG WWW: optimumg.com

    1 h 60 min
  4. Revisited: Is Honda’s K-Series Really the Greatest 4-Cylinder Ever Made?

    31/12/2025

    Revisited: Is Honda’s K-Series Really the Greatest 4-Cylinder Ever Made?

    *** We’ll be taking a break over the Christmas/New Year period and will be back in action mid-January. That means that although there won’t be any new episodes for a few weeks, we’ll be taking another look back at some of our favourite episodes.  *** Few people know more about ultra-high-performance engine building than this week’s guest, Terry Radbourne of Bourne HPP. In this episode, we’re going to be discussing topics like creating engines for LMP1 and Mercedes’ F1 team, truly getting the absolute most out of Honda’s K series motor, as well as the odd controversial opinion that’s sure to get the comment section fired up. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Terry brings an intriguing mix of expertise and insider knowledge — straight out of school, he found himself working for Advanced Engine Research and quickly became involved in some seriously high-end race engine design and building work. After a few years spent honing his craft — including a stint creating engines for the Mercedes Formula 1 team, Terry went on to found his own company, Bourne High Performance Powertrains, or Bourne HPP for short. Bourne HPP specialises in designing and building seriously aggressive motors — most commonly of the Honda K-series variety in both naturally aspirated and turbocharged forms. This allows us to dive very deep into the intricacies of four-cylinder engine building, and time is spent discussing intake port design, cylinder sleeves, compression ratio, and a whole lot more. We also get stuck into the K-series motor itself, and Terry spends time talking us through exactly why he thinks this is one of the best engines ever produced and how to get the most out of it. As Bourne HPP is something of a one-stop-shop that does everything from engine rebuilds, to NA and turbocharged crate engine packages, to dyno tuning with the use of Syvecs and Lyfe Racing ECUs, Terry has an absolute oversupply of knowledge that he’s (mostly) willing to share. If you want to get smarter, this episode with Terry Radbourne of Bourne HPP is not to be missed. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip As mentioned in the podcast, you can listen to our episode featuring Syvec’s Ryan Griffiths here: https://hpcdmy.co/Syvecs Follow Bourne HPP here: IG: @bourne_hpp FB: Bourne HPP WWW: bournehpp.com

    2 h 17 min
  5. 153: A High School Project Gone Wild: 1,450HP IndyCar x Firebird

    17/12/2025

    153: A High School Project Gone Wild: 1,450HP IndyCar x Firebird

    What would happen if you took an IndyCar inspired chassis, dropped a 1973 Pontiac Firebird body over the top of it, and then added a 1,450hp twin-turbo LS? That’s essentially what Cavan Cameron and his father, Russell Cameron, of Horizon Motorsport have built. The project began as Cavan’s high school engineering project but has since evolved into one of the coolest and most ambitious builds we’ve seen in a while. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, Cavan shares his journey from a childhood passion for cars to pursuing a career in motorsports engineering, sparked by his father’s involvement in IndyCar. We dive into the “Hammerhead” build that Cavan and his dad have been developing, exploring the challenges of integrating genuine IndyCar components into a bespoke project. He breaks down the technical aspects of the tube-frame chassis, from fabrication and material choices to the complexities of suspension dynamics. We cover the finer details of designing and developing a competitive race car, with a focus on suspension, engine configuration, and aerodynamics. The conversation also touches on the challenges faced during its first outing at World Time Attack Challenge, including managing torque through the transaxle and tuning the car for optimal performance. This build is truly something special, and what Cavan has achieved is seriously impressive. We can’t wait to see how the car evolves as they continue to refine and dial it in. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow Cavan here: Instagram: horizon_motorsports_llc Youtube: horizon_motorsports_llc Timestamps: 0:00 A High School Project Gone Wild: 1,450HP IndyCar x Firebird 4:12 How did you become interested in cars? 5:21 What was your Dads involvement in Indy Car? 10:26 How’s the exposure to high level motorsport at a young age shaped your career? 11:53 Is it easier or harder to design parts with a tight set of rules? 16:10 Designing fit for purpose parts 18:58 Tell us about your motorsport degree  29:54 What is the Hammerhead and how did this project come about? 33:33 Did you design the car fully in CAD before starting? 39:27 How did you learn your fabrication skills? 42:56 How do you juggle getting the car done and completing it to a standard you’re proud of? 45:15 What material is the chassis made from? 50:58 How did you weld the chassis and get it square and straight? 55:11 How does changing the roll centre affect the car's handling? 59:01 Are the IndyCar spec’d fasteners adequate for the extra weight of your build? 1:01:30 How about the components like uprights and wishbones?  1:06:39 Spring rates and dampers, how did you spec these? 1:15:29 Did you ever consider putting a Cosworth XD engine in the car? 1:18:07 Was it ever a concern that the LS was going to have too much torque for the trans axel? 1:27:27 You’re not running any intercooler on this car? 1:32:54 How did you develop the aero package? 1:43:38 What’s left to develop on the car and when will we see it back on track? 1:46:41 Final 3 questions

    1 h 54 min
  6. 152: Building a Lamborghini Gallardo into a WTAC Weapon

    03/12/2025

    152: Building a Lamborghini Gallardo into a WTAC Weapon

    There’s no arguing the Lamborghini Gallardo GT3 is no slouch. But the World Time Attack Challenge is a whole different league, and in standard form this factory race car is basically like bringing a knife to a gunfight. To run with the world’s best, it needed serious development—and that’s exactly what Josh and his team at Specialised Racing Solutions delivered, bagging P2 in Pro class on the car’s debut outing. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, Josh Gardner breaks down his path from car-mad kid to professional mechanic and business owner. He gets into the hard parts of starting a workshop, and why custom builds are never as simple as they look from the outside. Josh also reflects on the lessons learned from running a business, His work on the Nissan GTR platform and his return to the sharp end of the automotive world with the Lamborghini Gallardo GT3 build—including what it really takes to compete at the highest level at WTAC. We dive into the nuts and bolts of performance development: turbo selection, installation, and the cooling challenges that come with high-output builds. The conversation also explores advanced engine management systems like MoTeC, the realities of CAN bus integration, and where technology is headed with the use of CAD, 3D scanning and 3D printing in modern performance builds. Josh is packed with knowledge, and his story—from backyard tuning as a teenager on the family PC to building time attack cars capable of taking on the world’s best—makes for a seriously compelling listen. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow Josh here: Instagram: specialisedracingsolutions WWW: srs.racing Timestamps: 0:00 Building a Lamborghini Gallardo into a WTAC Weapon 3:33 How did you develop a passion for cars? 9:34 How did you develop your tuning skills at such a young age? 13:44 How hard was it starting your own shop? 16:17 How did you develop your skills on the GTR platform? 18:02 What skills did you have when you started the business? 30:50 How did you get back into the hands on automotive scene? 32:06 Overview of the current business 38:29 What was the drive to attend World Time Attack? 39:55 Why did you choose the Lamborghini Gallardo?  42:46 How much of an advantage has it been starting with a GT3 car? 43:59 What are the Pro Class rule limitations at WTAC? 50:59 What is the engine package on the Lamborghini? 55:16 What are you doing for the intercooler/intake setup? 57:11 How are the turbos set up on the car? 1:03:42 What suspension modifications have you done to deal with the increase in downforce? 1:06:04 What is the electronics package you’re using? 1:14:31 What changes are you going to make for next year's WTAC? 1:17:00 Nissan GTR GT3 car 1:18:47 If we compare the Nissan and the Lamborghini what are the differences? 1:20:06 Are you using any technology to develop these cars? CAD, 3D scanning, 3D printing? 1:26:48 How much improvement will you get from moving the GTR engine back and down? 1:28:52 Is the GTR almost ready for WTAC? 1:29:46 What do we need to leverage 3D scanning and 3D printing technology? 1:35:02 Final 3 questions

    1 h 46 min
  7. 151: CBR1000 x Miata - A Match Made in Heaven?

    19/11/2025

    151: CBR1000 x Miata - A Match Made in Heaven?

    Many car enthusiasts have fantasised about a lightweight car with a motorcycle engine swap. After all, what’s not to like about a high-revving, lightweight engine that produces great power and sounds incredible, right? Reed Stormzand from the YouTube channel Reed Make Car tells us that while the combo can be awesome, it definitely hasn’t been all plain sailing. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, Reed shares his journey into the automotive world, detailing his self-taught welding and fabrication skills as well as his day job at ZZ Performance. We discuss his Cadillac ATS-V drag car, ZZ Performance’s involvement in pushing the platform forward, and their pursuit of the ¼-mile world record. We also cover his CBR1000-swapped Miata, which started out naturally aspirated but is now turbocharged. Reed talks about the challenges of the swap, the intricacies of using a motorcycle engine in a car, and how he learned to tune—first on the stock Miata engine and now on the CBR1000 setup. Reed never set out to become a YouTube car builder, but he’s built a solid following, and viewers clearly love his projects. His self-taught background, hard work, and willingness to learn by doing stand out as key takeaways. If you want to learn something, just start doing it. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow Reed here:  Youtube: @ReedMakeCar Timestamps: 0:00 Intro 3:35 How did you develop an interest in cars? 6:21 Can you talk to us about pulse TIG welding? 7:30 What does your day to day look like at ZZ performance look like? 11:21 Cadillac ATSV platform and chasing 1/4 mile world record. 22:03 Are there any limitations with HP tuners that are holding you back? 23:17 What boost are you running and how much power does the car make? 25:05 Do you set up your suspension and alignment for when the car is squatting? 28:39 How did the Miata with a motorcycle engine project come about? 31:18 Was there ever any other engines considered from the automotive world? 33:08 Is the gearbox strong enough and what are the challenges of running it in a car?  37:32 Is a motorcycle engine swap more complex? 40:24 What have you done with wiring and engine management? 43:16 Have you fitted a bigger set of injectors for fueling? 44:58 How are you controlling timing with the piggyback computer? 45:46 How much power did the bike engine make N/A and turbocharged?  46:29 Where are the limits of this engine's internal components? 46:48 Clutch and gear shifting 49:39 How do you go about tuning this platform when you don’t know the engine's limitations? 52:38 How is the driving experience with the motorbike engine compared to stock? 53:29 What’s the next step? FA20 BRZ 56:19 Let's wrap up the Miata, Are you doing the tuning? 58:35 Tell us a little bit more about your plans for the BRZ build? 1:06:56 Final 3 questions

    1 h 18 min
  8. 150: The Self-Taught Way: Building Wild Engines from Scratch

    05/11/2025

    150: The Self-Taught Way: Building Wild Engines from Scratch

    Imagine being a self-taught engineer who mastered the intricacies of engine design and is now building bespoke engines from the ground up. That’s exactly what Josh Valman from Motorsport_Engineering has done. We welcome Josh back for his second appearance on the podcast. This time, we catch up on his wild Alpha V8 Hayabusa project and dive into his latest creation — a turbocharged hot-vee V6 bespoke engine. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip In this episode of Tuned In, Josh shares his journey from self-taught engineer to bespoke engine designer and builder. We check in on his progress with the Alpha project before unpacking the details of his new V6 design. We explore the technical side of engine performance — including pre-ignition chambers, variable valve timing, and the unique benefits of a V6 engine configuration. Josh also discusses the finer points of engine design and the importance of balancing stroke and bore ratios while selecting the right compression ratios for boosted engines. With deep expertise in machining and manufacturing, Josh offers valuable insights into precision machining, materials selection, heat treatment, and maintaining tight tolerances in high-performance engine parts. If you’re fascinated by engine design, engine building, machining, or CAD, this episode is packed with knowledge. Josh’s passion for sharing his experience makes it a must-listen for anyone interested in the art and science of building engines. 👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: https://hpcdmy.co/podvip Follow Josh here: Instagram: Motorsport_engineering Youtube: Motorsport_engineering Timestamps: 0:00 The Self-Taught Way: Building Wild Engines from Scratch 3:34 Welcome back, Who are you? Where are you from and what do you do? 8:45 How did you learn your CAD skills? 2:11 What’s the complexities with manufacturing in China? 18:31 What’s happening with the Alpha project? 21:31 What is the process for making the tooling for carbon fibre body panels? 23:20 When do you see this competing in the British Hillclimb Championship? 23:46 What engine changes would you make to run the car at Pikes Peak? 27:05 What is a pre-ignition chamber and what’s the advantage? 34:40 What is pre-ignition and what causes it? 38:04 What’s the advantage of variable valve timing? 40:26 How did you go from a manufacturi 45:49 How do you choose the V angle for an engine? 51:17 How do you design parts & get them right without years of experience?  55:25 Why would a V6 require balance shafts? 58:27 Is it easier to design an engine from scratch than modify an existing one? 1:04:12 What are the factors that affect deciding on a stroke length?  1:06:36 How critical is the rod to stroke ratio? 1:07:55 How do you choose a compression ratio? 1:11:05 How do you confirm the strength of your engine parts? 1:13:53 Why do we need to heat treat our parts?   1:17:11 How do you keep accurate tolerances while machining these parts? 1:21:09 Why are you using a liner over a coated bore? 1:22:31 How hard is it machining coolant passages into the block & Head? 1:25:45 How are you confirming you have sufficient cooling when designing these engines? 1:30:40 How are you sealing the head on this engine? 1:34:12 How did the V8 engine go when you got it on the dyno? 1:35:53 Why did you go gear drive between the crank and cams? 1:40:09 How long between over

    1 h 57 min
Elenco completo (356)

Descrizione

High Performance Academy Presents: Tuned In. A podcast interviewing influential people from around the world at the top of their respected fields. Covering topics such as Tuning, CAD, Performance Engine Building, Automotive/Motorsport Wiring, Data Analysis, Driver Coaching/Training, Motorsport Fabrication and Car Setup.

Informazioni

  • Creatore
    High Performance Academy
  • Anni di attività
    2021 - 2026
  • Puntate
    356
  • Classificazione
    Contenuti adatti a tutti
  • Copyright
    © 2026 Tuned In
  • Sito web del podcast
    Tuned In

Potrebbero piacerti anche…