The D-Code Podcast

The D-Code

Decoding electronics manufacturing! Sean Kincaid, Elias Malfavon, and Daniel Stanphill along with an expert guest, talk all things PCBA.

  1. 8月4日

    Rev 3.10 Michael Sivigny of CeTaQ

    Michael Sivigny brings 25 years of experience to the table, and he shares a wealth of knowledge with us in this one. Michael leads CeTaQ Americas, and does an excellent job here of describing just some of the reasons that calibration of equipment isn't a simple checkbox, but requires a rigorous methodology. From the first time we talked to Michael, we've been wanting to have him on and this conversation is an excellent starting point for understanding how variability at each stage of the SMT process impacts the next stage. Thanks Michael for a fun conversation!

  2. 7月28日

    Rev 3.9 Miles Moreau of KIC

    What a fun conversation! Usually sitting in the backseat for conversations about reflow, Elias had the opportunity to sit down in person with Miles at KIC after seeing some live demos. Fresh and bubbling with his knowledge, he gets to sit in the driver's seat a bit and guide the conversation, bringing in Daniel and Sean's expertise with the actual products in use along the way. There is a lot of quality discussion along the way. We pruned the chapters down to the following

  3. 7月7日

    Rev 3.8 Juan C Frias

    Many thanks to our latest guest, Juan C Frias, for sharing his time and expertise with us. With 20 years of experience, Juan is an excellent source of all sorts of design knowledge. From "What is a component engineer?" to "Why would you put a via THERE?" we get a great overview of basic to more advanced and recurring questions Sean and Daniel find themselves asking regularly in assembly.

  4. 6月9日

    Rev 3.7 Hayden Lee AI Special

    Hayden Lee of [REDACTED] has extensive knowledge of AI tech for his ripe old age of 17. Starting at 12 with Python, Hayden hit the perfect timing for growing up with modern AI and LLM architecture as an extension of his natural inquisitiveness and tech interest.

  5. 5月26日

    Rev 3.6 - Gayle Towell of AIM on Developing Best Practices via Experimentation

    When we interviewed Gayle our first time at a tradeshow, the second the mics went cold, the first thing to be said was "We need to get you on for a full episode!" At long last, the Gayle Towell episode. When you spend your life thinking about physics, the SMT industry is highly welcoming and a logical place to land. Gayle demonstrates here that it isn't the number of years under your belt in your current position - it's about the knowledge you bring with you. From meta-analysis to quantifying the area ratio relationship to ALL forces acting on solder, she shares a lot of wisdom in this one.

  6. 4月30日

    APEX EXPO 2026 Olivier Carnal - Essemtec

    he folks at Essemtec are always a blast to talk with, and they usually bear gifts! One of those gifts was a Swiss Army knife, which is probably the best way to describe their Fox platform with its ability to jet paste and place components, all within a space-saving footprint. We are all equipment nerds here at The D-Code Podcast, so being able to get hands-on with some of Essemtec's innovative platforms was a real treat!

  7. 4月23日

    APEX 2026 Mike Konrad - Aqueous Technologies

    Author, business owner, multi-podcaster, and one of the most recognizable faces in the SMTA... Mike Konrad is all over the place, and killing it. Unfortunately or fortunately for him, depending on the day, he has become a huge part of The D-Code Podcast origin story and gets a front row seat to how the sausage is made. He still joins us on set anyway! Thanks for the mentorship Mike!

  8. 4月22日

    APEX 2026 Bobby Glidwell - Magnalytix

    How clean is clean enough? If you answered  1.56 µg/cm2 of NaCl equivalent, it's time to update your version of IPC J-STD-001! Class 2 and Class 3 assemblies now require "Objective Evidence" of cleanliness. Bobby Glidwell from Magnalytix stops by the set to explain how obtaining Objective Evidence doesn't have to be a pain, in fact they've put everything you need into a box!

すべて見る（100）

番組について

Decoding electronics manufacturing! Sean Kincaid, Elias Malfavon, and Daniel Stanphill along with an expert guest, talk all things PCBA.

情報

  • クリエイター
    The D-Code
  • 配信期間
    24年 - 26年
  • エピソード
    100
  • 制限指定
    不適切な内容を含まない
  • Copyright
    © Copyright 2024 All rights reserved.
  • 番組のWebサイト
    The D-Code Podcast

その他のおすすめ