The Lone Machinists

Jamie Peacock & Curt Van Filipowski (Feat. Jon Dillehay)

Curt and Jamie dive into business and manufacturing as one-man shops.

  1. Ep. 62: The Internet Is Forever (And So Are Our Bad Ideas)

    HACE 3 DÍAS · VIDEO

    Ep. 62: The Internet Is Forever (And So Are Our Bad Ideas)

    In this episode of the Lone Machinists Podcast, Jamie and Curt once again prove that running a machine shop is mostly problem-solving, mild chaos, and questionable purchasing decisions. Jamie explains how Curt bullied him into buying a gimbal and why filming smooth shop footage is apparently harder than flying a plane, while Curt announces he’s defecting in the AI wars and claims Claude is now the smarter shop assistant. Meanwhile in the real world, Jamie is busy pressing thousands of rivets a week, chasing a mysterious lathe issue that keeps snapping tiny parts, and discovering that the “slightly noisy” spindle on a friend’s lathe was actually being held together by hopes, dreams, and a very destroyed bearing. Along the way they rant about AI scraping YouTube creators, the increasingly weird world of AI voice scams, questionable surface finishes, and why recording hundreds of hours of yourself talking on the internet might one day be the dumbest or smartest thing you ever did. Links Discussed: Noughtical Work Holding: https://www.noughticalwh.com/ Toxing: https://tox.com/en-us/technologies/clinching/clinching caleys cans: https://www.youtube.com/@cayleependerass/shortsThe Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/ https://www.noughticalwh.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 8 min
  2. Ep. 62: RAID 1 and Pray

    4 MAR · VIDEO

    Ep. 62: RAID 1 and Pray

    This week on The Lone Machinists, Jamie and Curt spiral (responsibly) through ultra-paranoid RAID backups, fiber lines getting excavated into oblivion in South Africa, and the launch of the brand-new Noughtical Workholding Shopify store. We dive into mirrored drives, M-Discs, offsite backups, and why losing your childhood photos is a trauma you only need once. Then things escalate: Haas machines booting up with ads, ChatGPT hallucinating wiring diagrams, gimbals doing unnecessary 360° flips, and the very real possibility that we’re speed-running the darkest timeline. It’s machining, media, marketing, mild conspiracy, and a healthy dose of “just hold it properly” — all in one episode. Links Discussed: Noughtical Work Holding: https://www.noughticalwh.com/ Easily Replaceable USB-C Port Spawned By EU Laws: https://hackaday.com/2026/02/26/easily-replaceable-usb-c-port-spawned-by-eu-laws/The Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/ https://www.noughticalwh.com/ Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 8 min
  3. Ep. 61: Schrodinger's Guest Part 2

    25 FEB · VIDEO

    Ep. 61: Schrodinger's Guest Part 2

    This week on The Lone Machinist, the "Original Kurt" returns to reclaim his throne (or at least a guest spot) as we welcome Jon Dillehay from 2SM Performance and Engine Trix. We dive deep into the mechanical prowess required to maintain a garage-based empire, the tragedy of the Harbor Freight bandsaw graveyard, and why Jamie is currently machining at a feed rate of "boobs millimeters per minute". In this episode, we tackle the hard-hitting questions, such as: Can Curt actually read?  Is John a psychic? How many bandsaws is too many? Why are anodizers the devil? The Garage Dream: Waking up at 2:00 a.m. to the sound of money (and Shopify notifications), sipping coffee in a bathrobe, and turning on a phase converter while the rest of the neighborhood sleeps. Whether you’re here for the two-stroke engine talk, the "dust maker" end mill that evaporates aluminium, or Curt's latest obsession with self-hosting his photos to escape the cloud, there’s something for every machinist who’s ever felt alone with their machines. Links Discussed: Hofmann and Vratny: https://hitech.co.za/products/hofmann-and-vratny Engine Trix: https://www.enginetrix.com/ Mini Monster: https://minimonster.ca/The Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jon: https://www.instagram.com/2smperformance https://www.2smperformance.com/Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 19 min
  4. Ep. 60: Schrodinger's Guest

    18 FEB · VIDEO

    Ep. 60: Schrodinger's Guest

    Welcome to the Loan Machines Podcast, also known as the Schrödinger’s Guest Episode, where we ponder whether John is actually joining us or remains a ghost in the machine. In a harrowing turn of events, Curt recounts his battle with a porcelain ramekin that nearly claimed his eye during a routine oatmeal delivery for his rats—proving that while he wears safety glasses in the shop all day, the kitchen is a lawless wasteland. Meanwhile, Jamie has declared "open season" on expired patents to launch his Nautical Workholding line, including the new Keel Clamps and a control panel he is wiring with exclusively blue wire to ensure maximum "savage" confusion for anyone attempting to troubleshoot it later. Between reviews of the DC Collet system and its unexpected flex, we dive into the quest for acetone-resistant archival ink for the perfect pen refill and the logistics of punching half a million nails "for her pleasure" on an eccentric press. Whether you are here for the debate on "piss plastic" (Ultem), the shocking logarithmic power of 30W lasers, or Curt’s four-year-old’s deep dive into classic Pokémon, we’ve got you covered. Links Discussed: Instagram Link: https://www.instagram.com/p/Bs_UgsQg7Vs/?igsh=MzhnMGEwaTU5MzZzThe Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 15 min
  5. Ep. 59: Designed for Quadruple-Jointed Dwarf Mechanics

    11 FEB · VIDEO

    Ep. 59: Designed for Quadruple-Jointed Dwarf Mechanics

    Buckle up for another episode of the Lone Machines Podcast, where we discuss the fine line between professional machining and absolute shop chaos. In this episode, Jamie recounts his harrowing experience performing spindle surgery with tweezers to float solder into a corroded via—all because his probe decided to quit after being "slightly squished" at 12,000 RPM. He also explains how he's balancing a 700-enclosure production run with a new side hustle: serving as a personal chauffeur for his mother-in-law, conveniently timed to 18-minute machine cycles. Curt shares his plan to escape the "brain-sucking algorithm" of Instagram by building a custom media site powered by RSS, ensuring his content reaches humans instead of robots. He also reviews his latest purchase: a 90-centimeter parabolic softbox that has effectively turned his garage into the brightest spot on Earth. Whether you're here for the 3D printing drama, the AliExpress turbo scams, or the tax-deductible commercial vehicles, we've got you covered. Links Discussed: Grimsmo video: https://www.youtube.com/watch?v=uSNo8pVeSZs ano video: https://youtu.be/btjaRaaXCBM?si=oC3BU-5KsRTT69S8 Story Telling Is Important: https://youtu.be/Ayhk9HXvZEE?si=m8-AT_ZkVfoX3rLiThe Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 15 min
  6. Ep. 58: The Seizure-Inducing Delivery Sensor

    3 FEB · VIDEO

    Ep. 58: The Seizure-Inducing Delivery Sensor

    In this episode of The Loan Machinist, Jamie and Curt dive into the chaotic reality of running a machine shop while battling the elements and outdated technology. Jamie recounts a rough Monday in South Africa where 30mm of rain and a lightning strike claimed a workshop monitor, while his wife "swore at him" over comments regarding his machine's nicknames. Meanwhile, Curt reveals his seizure-inducing Home Assistant automation that flashes every light in the workshop the moment a delivery driver touches his walkway. The duo discusses the "magic" of VS Code and the necessity of adding dates to post-processors to stop the confusion of "reposting the same program". They also explore the merits of Grip CNC for spindle grippers, which Jamie claims can turn a two-day programming nightmare into a ten-minute breeze. Finally, Jamie explains why he pays a bean counter to handle his financials: "If I do it, I'm going to jail". Whether you are here for the Pi 5 case talk or the Bridgerton rage-bait, this episode is packed with shop talk and shenanigans Links Discussed: Smart lathe response to Caleeys cans: https://youtu.be/xt2YxyMm-9o?si=y9kEQaJ4TSfzd4pC   Maritool adjustable runout hydraulic sleeves: https://www.maritool.com/Collets-And-Sleeves-Hydraulic-and-Milling-Chuck-Sleeves-Adjustable-Runout-Hydraulic-Sleeves/c21_913_1888/index.html     The Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 6 min
  7. Ep. 57: Just Another Brick in the Wall

    27 ENE · VIDEO

    Ep. 57: Just Another Brick in the Wall

    In this episode of the Lone Machinist Podcast, Jamie and Curt dive head-first into shop chaos, questionable safety decisions, and machines that just won’t stop printing money. Jamie introduces the Bukkake Blaster 7000, a new coolant manifold upgrade that blasts hardcore, while Curt reflects on the joy of a machine running nonstop for hours—hot, moist, and perfectly intolerant from the first part to the last. Along the way, they cover long-run machining, thermal stability, laser mishaps, intrusive pneumatic ideas, and why sometimes the correct fix is simply unplugging the wire. There’s also a surprise structural failure, a wall that absolutely “didn’t need to be there,” and a healthy reminder that lasers do not care about your eyesight—no matter how confident you feel in the moment. Machining, lasers, money printers, and safety third. Just another day in the shop. Links Discussed: smart lathe: https://youtu.be/on5yTSBz2tM?si=cNUjLE2XIThAa24l   a1 changer: https://www.aliexpress.com/item/1005010477325746.html   Tiny Trains: https://youtu.be/DlL3AunnM_I?si=TbpS-hlauXLah6-R    The Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 18 min
  8. Ep. 56: How Hard Can It Be? (Famous Last Words)

    20 ENE · VIDEO

    Ep. 56: How Hard Can It Be? (Famous Last Words)

    In this episode of the Loan Machines Podcast, Jamie and Curt bounce between small wins and absolute disasters in the shop. Jamie dives into poking around a PLC “just to see how hard it could be,” accidentally saving himself hundreds of dollars and making his machine do exactly what he wants. Curt, meanwhile, declares war on an inkjet printer in the name of responsibility… and loses badly. Along the way, they talk garage “statues” that never move, clearing mental clutter by throwing things out, fiber lasers and why they’re terrifyingly cool, and why some projects really should’ve gone in the bin years ago. It’s shop talk, light swearing, questionable decisions, and the kind of stories that only happen when you try to fix things yourself. Links Discussed: Jet trains: https://www.youtube.com/watch?v=4h4lLYmFtgY   Slow Mo Guys - Virtual Boy: https://youtu.be/jW7M8H99x7Y?si=aw0EbklFztmt6S8b Brother horizontal: https://www.youtube.com/watch?v=wwvuYcKNcZ0   GTEL Train: https://www.youtube.com/watch?v=pXXi3siVA_Q  The Lone Machinist: Website: https://thelonemachinists.com/ Bonus Content: https://thelonemachinists.com/#bonus-content Merch: https://www.jspeceng.com/online-store Patreon: https://patreon.com/TheLoneMachinistsNeed Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/ Want to try out Toolpath? Give it a go and get 10% off by using the code TLM10 at checkout: https://toolpath.com/ Jamie: http://instagram.com/jspec_engineering https://www.jspeceng.com/Curt: https://www.instagram.com/confoundedmachine/ https://www.confoundedmachine.com/

    1 h y 16 min
Ver todo (63)

Acerca de

Curt and Jamie dive into business and manufacturing as one-man shops.

Información

  • Creador
    Jamie Peacock & Curt Van Filipowski (Feat. Jon Dillehay)
  • Años de actividad
    2025 - 2026
  • Episodios
    63
  • Clasificación
    Explícito
  • Mostrar sitio web
    The Lone Machinists

También te podría interesar