Automotive Quality and Engineering

Quality 4.0

Are you involved somehow in the automotive industry?Here are some curious podcasts that you may like ... Feel free to enjoy and to follow me and my groups also on LinkedIn...https://www.linkedin.com/in/ma... Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

  1. Clamoroso dietrofront della Ford ...ritorno degli ingegneri

    4 dgn geleden

    Clamoroso dietrofront della Ford ...ritorno degli ingegneri

    Analisi di Caso: Ford e il Paradosso dell'Automazione – Criticità Metodologiche e Lezioni di Leadership 1. Inquadramento Strategico: Il Fallimento della Governance nell'Era Digitale Il caso Ford (2020-2026) non deve essere derubricato a mero incidente di percorso tecnologico; esso rappresenta una profonda crisi di governance e una disfunzione sistemica nella gestione del cambiamento. Il fulcro del fallimento risiede nell'incapacità del Board di supervisionare e auditare i protocolli di knowledge capture durante la transizione verso i sistemi Cyber-Fisici. Questa miopia strategica funge da monito per il settore manifatturiero globale: l'illusione che l'automazione possa prescindere dalla stratificazione dell'esperienza umana conduce inevitabilmente a un collasso dell'eccellenza operativa.Tra il 2020 e il 2024, Ford ha perseguito una strategia di automazione massiva, eliminando circa 5.300 posizioni dedicate al controllo qualità in favore di algoritmi di intelligenza artificiale. Tuttavia, la realtà industriale ha imposto un brusco riposizionamento strategico, culminato nella reintegrazione di 300-350 ingegneri e ispettori qualità senior. Come evidenziato da Charles Poon (VP Hardware Engineering), l'azienda ha operato sotto l'assunto erroneo che l'alimentazione dei sistemi con i soli requisiti tecnici formali fosse sufficiente a garantire la conformità del prodotto. Kumar Galhotra (COO) ha successivamente confermato la necessità di ripristinare il capitale intellettuale umano per intercettare le criticità dei componenti prima della fase di mass production. La discrepanza tra le aspettative algoritmiche e la qualità reale ha evidenziato una falla nel trasferimento della conoscenza, dove la velocità di adozione ha tragicamente superato la capacità di codifica del sapere esperto. Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    23 min.
  2. PPAP requirements IATF 16949 Ford CSR June 2026

    5 dgn geleden

    PPAP requirements IATF 16949 Ford CSR June 2026

    Ford’s 2026 Quality Pivot: A Survival Guide to the New PPAP Updates The Hook: A New Standard for 2026 On June 15, 2026, the margin for error in the Ford supply chain effectively evaporates. The release of Ford’s new Customer-Specific Requirements (CSR) for PPAP 4.0 and Service PPAP 1.0 represents more than a documentation refresh; it is a fundamental shift toward the Special Characteristics Communication and Agreement Form (SCCAF) process. If you think this is just another administrative hurdle, you aren't paying attention. This CSR is a mandate for unprecedented transparency and statistical precision. For Tier 1 and sub-tier suppliers, surviving this transition requires moving beyond "check-the-box" compliance. From capacity-linked quality triggers to the mandate of advanced statistical modeling, Ford is tightening the noose on variability. If your Quality Lab is still relying on legacy Excel templates for Range-based R&R, you are already behind the 2026 curve.Takeaway 1: Capacity is Now a Quality Trigger In a move that caught many Logistics and Purchasing departments off guard, Ford has officially moved capacity verification into the domain of the Supplier Technical Assistance (STA) engineer. Per Page 6 of the CSR, a PPAP submission is now triggered by volume changes alone: Revised Ford required capacity exceeding verified supplier capacity This is a massive organizational shift. By linking manufacturing logistics directly to formal quality approval in Section 2.2, Ford is essentially giving the STA site engineer "veto power" over production increases. If your quality data cannot support the stress of a higher run-rate, your capacity "uplift" will be denied. Quality and Logistics can no longer operate in silos; a production volume increase is now legally and technically a quality event. Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    40 min.
  3. IATF 16949 FORD CSR JUNE 2026

    5 dgn geleden

    IATF 16949 FORD CSR JUNE 2026

    Beyond Compliance: 5 Impactful Shifts in Ford’s 2026 Quality Requirements Every Supplier Must Know 1. Introduction: The High-Stakes Evolution of the Global Supply Chain Automotive suppliers today operate under a regime of unprecedented technical and logistical pressure. In this high-stakes environment, the release of the "Ford Customer-Specific Requirements (CSR) — Effective June 15, 2026" represents a definitive pivot for organizations utilizing the SCCAF process. This update is far more than a routine manual refresh; it is a strategic manifesto for the future of the Ford-supplier relationship. It signals a decisive shift toward high-velocity transparency, predictive risk management, and absolute Tier-1 accountability for the entire value chain. For the modern quality professional, this document is no longer just a reference—it is the roadmap for operational survival. Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    40 min.
  4. HARA,_ASIL,_ISO_26262__L_Architettura_Segreta_della_Sicurezza_A

    03-11-2025

    HARA,_ASIL,_ISO_26262__L_Architettura_Segreta_della_Sicurezza_A

    Technical Report: Safety Requirements and Design Specifications for Next-Generation Automotive Systems 1.0 Introduction and Report Scope This technical report formally establishes the safety requirements, design specifications, and validation protocols for a next-generation automotive safety system. The rapid evolution of vehicle automation necessitates a rigorous, standards-driven approach to ensure that safety-critical systems perform reliably under all foreseeable conditions. The primary objective of this document is to detail the comprehensive framework that guarantees the system's compliance with critical industry standards, thereby delivering a robust and reliable safety solution. This framework begins with an understanding of the system's fundamental functional architecture. 2.0 System Overview and Core Functionality A clear understanding of the system's fundamental architecture is a prerequisite for analyzing its safety requirements. The design is centered on a single, unambiguous purpose that informs every component and process. The system's core mission is to proactively detect and mitigate potential collision scenarios by interpreting the vehicle's environment and taking decisive, automated action when necessary. This is achieved through the coordinated operation of three key components: • Sensor Fusion Module: Integrates and processes a continuous stream of data from diverse inputs, including Radar, LiDAR, and Cameras, to generate a unified and persistent object track file of the surrounding environment. • Decision Making Unit (DMU): Assesses risks based on the fused sensor data and triggers appropriate preventative or mitigating responses according to pre-defined safety logic. • Actuator Interface: Executes the DMU's commands by interfacing directly with and controlling the vehicle's braking, steering, and throttle systems. The design, integration, and operation of these components are not arbitrary; they are strictly governed by internationally recognized safety and cybersecurity standards. 3.0 Governing Safety & Cybersecurity Standards Adherence to internationally recognized standards is the non-negotiable cornerstone of the system's design philosophy. Our interpretation and application of these standards are conservative, prioritizing safety margins over design simplicity. This commitment ensures that functional safety and resilience are engineered into the product from its inception. Our development lifecycle is comprehensively aligned with the leading standards for automotive functional safety and cybersecurity. 3.1 Functional Safety Compliance: ISO 26262 Our design ensures full compliance with the ISO 26262: "Road vehicles – Functional safety" standard, which provides a risk-based approach for automotive electrical and electronic systems. To meet the highest level of safety, the system is engineered to meet ASIL D, the most stringent classification for risk reduction Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    20 min.
  5. Decoding_Automotive_Safety__An_Engineering_Forensics_Dive_into_

    03-11-2025

    Decoding_Automotive_Safety__An_Engineering_Forensics_Dive_into_

    The Journey of an Automotive Safety SysThe Journey of an Automotive Safety System: From Concept to CarIn base a 1 fonteThe Journey of an Automotive Safety System: From Concept to CarIntroduction: The Mission of Modern Automotive SafetyDeveloping a new automotive safety system is a critical mission with a clear objective: to prevent accidents and, when they are unavoidable, to minimize injuries. This process is a complex journey, transforming a promising idea into a reliable feature integrated into millions of vehicles worldwide.This guide is designed to demystify that journey for students of engineering and technology. We will explore the four core phases of development, providing a clear roadmap from the initial concept to the finished car rolling off the assembly line, and explaining the engineering rationale that guides every step.--------------------------------------------------------------------------------1. Phase 1: Laying the Foundation - Research and AnalysisBefore a single component is designed, we must first build a deep and comprehensive understanding of the landscape. This foundational phase is essential for defining the "what" and "why" of the entire project, ensuring the final system is relevant, compliant, and technologically superior. Key activities include:• Market Research: This involves a thorough analysis of existing safety systems and consumer expectations. From an engineering perspective, the strategic goal is to define specific performance benchmarks and feature sets that will offer a measurable safety advantage over existing solutions.• Regulatory Analysis: Every safety system must meet stringent legal and performance standards. This activity ensures the design will comply with crucial regulations from bodies like the National Highway Traffic Safety Administration (NHTSA) in the U.S. and the European New Car Assessment Programme (Euro NCAP), which are non-negotiable prerequisites for market access.• Technology Scouting: The automotive landscape is in a constant state of evolution. This step involves exploring emerging technologies—such as advances in artificial intelligence, sensor fusion techniques, and Vehicle-to-Everything (V2X) communication, which allows vehicles to share safety data—to determine which innovations can be leveraged to build a more effective and reliable system.With the problem space rigorously defined, the team can now transition from analysis to synthesis—the creation of a tangible engineering solution.tem: From Concept to Car Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    9 min.
  6. The_Paradox_of_Lean__Why_the_Toyota_System_Works_Everywhere_But

    22-10-2025

    The_Paradox_of_Lean__Why_the_Toyota_System_Works_Everywhere_But

    Why 'Going Lean' Fails: The Hidden Philosophy Behind Toyota's Success Introduction: The Enduring Puzzle of Lean Manufacturing For decades, the Toyota Production System (TPS) has been the gold standard for operational excellence, driving remarkable success at companies like Toyota and Danaher. After its principles were globally popularized in the 1990 book The Machine that Changed the World, one would expect its widespread adoption. The book’s authors coined the term “lean manufacturing,” which quickly became synonymous with continuous improvement. And yet, a puzzling question remains. In the United States alone, there are over 240,000 companies with 50 or more employees, but very few have successfully implemented TPS. Why does this proven system remain so elusive? The problem often begins with the name itself. Author James Womack later expressed regret over the term “lean manufacturing,” noting that it “misleads people into thinking TPS only applies to manufacturing operations.” In contrast, Jeffrey Liker intentionally titled his groundbreaking book The Toyota Way to emphasize that TPS is a comprehensive philosophy, not merely a set of techniques. This fundamental misunderstanding is the key to the puzzle. Most organizations fail because they treat TPS as a set of tools to be layered onto their existing business model. In reality, it is a complete and integrated system built on a foundation that most leaders overlook entirely. It's a Complete Economic System, Not a Toolbox Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    13 min.
  7. FMEA__Preventing_Failure

    07-10-2025

    FMEA__Preventing_Failure

    An Introduction to FMEA: A Beginner's Guide to Proactive Risk Management Think of FMEA (Failure Mode and Effects Analysis) as a 'pre-mortem' for your product or process—a structured way to anticipate failure and prevent it before it ever happens. Used by industries from aerospace to automotive, it's a powerful tool for looking into the future, identifying what might go wrong, and taking steps to stop it. This guide will break down the core concepts of FMEA into simple, understandable steps, giving you the foundation to understand this essential quality management technique. Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    7 min.
  8. Processo_Approvazione_PPAP

    02-10-2025

    Processo_Approvazione_PPAP

    The sources provide a comprehensive overview of the Production Part Approval Process (PPAP), a standardized methodology primarily used in the automotive and aerospace industries to ensure parts consistently meet customer quality specifications. They explore the history and definition of PPAP, noting its establishment by the Automotive Industry Action Group (AIAG) and its crucial role as a risk mitigation and quality assurance framework. A significant portion of the text is dedicated to outlining the PPAP process, including its 18 key components and five levels of submission, which vary in their documentation requirements. Furthermore, the documents detail the benefits of PPAP, such as enhanced efficiency and communication, while also addressing challenges like standardization complexity and the time-consuming administrative burden. Finally, the text touches on case studies from companies like Ford and General Motors and discusses the future evolution of PPAP, emphasizing digital transformation. Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

    6 min.
Bekijk alles (23)

Info

Are you involved somehow in the automotive industry?Here are some curious podcasts that you may like ... Feel free to enjoy and to follow me and my groups also on LinkedIn...https://www.linkedin.com/in/ma... Become a supporter of this podcast: https://www.spreaker.com/podcast/automotive-quality-and-engineering--6656590/support.

Informatie

  • Kanaal
    Quality 4.0
  • Maker
    Veljko Massimo Plavsic
  • Jaren actief
    2025 - 2026
  • Afleveringen
    23
  • Beoordeling
    Veilig
  • Copyright
    © Copyright Veljko Massimo Plavsic
  • Website van aflevering
    Automotive Quality and Engineering
  • Provider

Meer van Quality 4.0