EDC-TV

Grant
  • 5.0 (1)
  • Hobbies

Three industry veterans dive into the world of pocket knives, multitools, flashlights, and all things EDC. Insightful discussions, insider stories, and expert takes on the gear you carry every day. EDC TV is brought to you by the fine folks at Multitool.org, aka The Only Forum That Matters.

  1. 4d ago

    Kirky's Back | EDC Watches Worth Wearing (EP 041)

    What makes a watch worthy of being part of your Everyday Carry? In Episode 041 of EDC-TV, Grant Lamontagne is joined once again by special guest John "Kirky" Kirkwood for a wide-ranging conversation about the watches that earn a permanent place on your wrist. From rugged Casio G-Shocks and affordable field watches to Seikos, Swatches, smartwatches, and everything in between, they explore what really matters in an EDC watch. This isn't a discussion about luxury or status, it's about reliability, practicality, and the stories that your gear collects along the way. Along the way, the conversation wanders (as EDC-TV and Multitool.Org conversations often do!) into Swiss Army knives, multitools, watch modifications, NATO straps, military gear, collecting, and why the best piece of equipment is the one you'll actually use. Whether you're a dedicated watch enthusiast, a casual wearer, or just looking for your next dependable everyday companion, there's something here for you. In this episode you'll hear about: What makes a great EDC watchWhy Casio G-Shocks have earned their legendary reputationWatch modifications and personalizationField watches vs. dive watches vs. smartwatchesBudget-friendly watches that punch above their priceThe stories and memories that make everyday gear specialHow watches fit into a complete EDC philosophyWhy "wear what you love, and love what you wear" may be the best advice of all. Join the conversation! Visit the Multitool.org forums: https://forum.multitool.org Subscribe to EDC-TV for new episodes every week. #EDCTV #EDC #EverydayCarry #Watches #EDCWatches #Casio #GShock #Seiko #FieldWatch #DiveWatch #Smartwatch #WatchCollector #WatchCommunity #ToolWatch #SwissArmyKnife #Victorinox #Multitool #GearTalk #KnifeCommunity #EverydayGear #WatchFam #MultitoolOrg #JohnKirkwood #GrantLamontagne

  2. Jul 17

    Bladeless EDC | Chatting with Kirky (EP 040)

    This week’s episode is a special one, not just because of the topic (which is definitely a good one!), but because of the guest. I’m joined by long‑time forum member John Kirkwood, known to all of us as Kirky, who’s been part of Multitool.org since 2011. For our 20th Anniversary, it felt right to bring in someone who embodies the spirit, humor, and history of the community. We kick things off the way only EDC‑TV can, with me stumbling through the intro (I always screw up the intros…) and Kirky warming up with a conversation that’s equal parts gear talk, nostalgia, and genuine friendship. From there, we explore the wonderfully weird world of bladeless EDC, including Kirky’s custom mods, his professional life, the tools that saved his sanity, and occasionally his job. You’ll hear stories about: The bladeless Fuse he rebuilt with Wave driversThe legendary KST, aka the Kirky Survival ToolHis modified Sideclip (“heresy to some people…”)The modern options like the Nextool Mini Sailor Lite and Roxon Mini‑Flex CompanionAnd yes… even the Gerber Armbar Mini But this episode is also a love letter to the community. We reminisce about the old UK meetups with exotic animals on the barbecue, and call out names many of us haven’t heard in years: Benner, Dunc, Gareth, Taxi Dad (Micheal), Magic Bus (Chris), Al, Paul, Dave K, and so many more. If you were ever part of Multitool.org, you’re part of this story. As Kirky puts it, “Names are funny things.” And after 20 years of Multitool.org, the names (and the people behind them!) are what made this place special. Whether you’re new to the forum or you’ve been with us since the old SOSAK days, this episode is a celebration of everything we’ve built together. #EDCTV #MultitoolOrg #20Years #AnniversaryEpisode #EDCCommunity #NonBladedEDC #Multitools #SwissArmyKnife #Kirky #EDCGear #EverydayCarry #GearTalk #KnifeCommunity #ToolNerds #PodcastLife #EDCContent #ForumFamily #EDCHistory

  3. Jul 10

    20 Years of Multitool Madness | Kansept Chaos & the Return of the Mechanic Junior (EP 039) (Video)

    In this chaotic, hilarious, and knife‑packed episode of EDC‑TV, Grant and Inky dive head‑first into the 20th Anniversary of Multitool.org — celebrating two decades of sharp objects, questionable decisions, and the greatest community of tool nerds on the planet. Grant kicks things off with updates on the massive anniversary festivities: giveaways, discount codes, games, prizes, and special collaborations with Kansept Knives and other industry friends. If you haven’t joined the party yet, head over to forum.multitool.org and get involved — or reach out if your company wants to be part of the celebration. From there, the boys go full‑tilt into knife talk, reviewing a lineup of wild blades sent in by Kansept for the anniversary. Grant shows off the Kansept Fenrir, complete with 80s camouflage scales and gold titanium liners — a knife that somehow manages to look like a smoking jacket and a gas‑station fever dream at the same time. Inky, naturally, volunteers to “inspect” it. Next up is the Kansept Parr, a tiny fixed blade with a surprisingly capable CPM steel, a clever sheath (with a drain hole, thank you Kansept), and a pocket clip that may or may not eject the knife into your truck seat. Grant recounts the near‑miss that could’ve ended in a very awkward ER visit. Then comes the monster: the Tenable Knives Bombur — a half‑pound pocket beast named after the famously hefty dwarf from The Hobbit. With frag‑pattern G10, a triangular thumb hole, and enough jimping to grip it with Teflon gloves in a butter factory, this knife is equal parts ridiculous and irresistible. Finally, Grant reveals the main event: the official Multitool.org 20th Anniversary Swiss Army Knife, a reissue of the legendary “Special Mechanic” / “Mechanic Junior” — a model never officially released, originally made for Radio Shack’s Techline brand. It’s a tribute to the community, the collectors, and the 20‑year legacy of the world’s premier Swiss Army Knife resource. It’s knives, jokes, nostalgia, and pure multitool madness — exactly what you expect from Grant and Inky. #EDCTV #MultitoolOrg #20thAnniversary #SwissArmyKnife #SAK #KnifeCommunity #KanseptKnives #EDC #EverydayCarry #KnifeReview #PocketKnives #GearTalk #KnifeNerds #ToolTalk #EDCgear #KnifeLife #KnifeCollectors #PodcastLife #YouTubeEDC #GearReview

  4. Jul 3

    Handle This! | Beginner's Guild eto Knife Handles & Tangs Explained | (EP 038) (Video)

    Knife nerds, buckle up! Episode 038 of The Beginner’s Guide to Knives dives deep into one of the most misunderstood parts of knife design: handles and tangs. Grant, Inky Chris, and Abe Elias (Diving Sparrow Knifeworks / Blade Magazine) break down everything from full tangs, hidden tangs, rat‑tail tangs, skeletonized handles, half tangs, and even the infamous no‑tang hollow‑handle survival knives of the Rambo era. Along the way, we get gear talk, knife drops, accidental bloodshed, Maxpedition nostalgia, and the usual chaos you’ve come to expect from EDC‑TV. If you’ve ever wondered why certain knives feel stronger, lighter, or more balanced, or what actually goes on inside the handle this episode is your crash course. Watch now and level up your knife knowledge. #EDCTV #MultitoolOrg #KnifeCommunity #KnifeNerds #EDC #EverydayCarry #KnifeHandles #KnifeTangs #GearTalk #BladeMagazine #DivingSparrowKnifeworks #OutdoorGear #KnifeCollectors #EDCgear #BeginnerKnifeGuide #GearFeed #20YearsStrong

  5. Jul 3

    Handle This! | Beginner’s Guide to Knife Handles & Tangs Explained | (EP 038) (Audio)

    Knife nerds, buckle up! Episode 038 of The Beginner’s Guide to Knives dives deep into one of the most misunderstood parts of knife design: handles and tangs. Grant, Inky Chris, and Abe Elias (Diving Sparrow Knifeworks / Blade Magazine) break down everything from full tangs, hidden tangs, rat‑tail tangs, skeletonized handles, half tangs, and even the infamous no‑tang hollow‑handle survival knives of the Rambo era. Along the way, we get gear talk, knife drops, accidental bloodshed, Maxpedition nostalgia, and the usual chaos you’ve come to expect from EDC‑TV. If you’ve ever wondered why certain knives feel stronger, lighter, or more balanced, or what actually goes on inside the handle this episode is your crash course. Watch now and level up your knife knowledge. #EDCTV #MultitoolOrg #KnifeCommunity #KnifeNerds #EDC #EverydayCarry #KnifeHandles #KnifeTangs #GearTalk #BladeMagazine #DivingSparrowKnifeworks #OutdoorGear #KnifeCollectors #EDCgear #BeginnerKnifeGuide #GearFeed #20YearsStrong

  6. Jun 26

    What Makes a Good Knife? | Knife Steels & Grinds Explained (EP 037) (Video)

    In this episode of EDC‑TV, Grant Lamontagne from Multitool.org sits down with Abe and Inky to dive deep into the science and craftsmanship behind knife performance. From D2 vs. 1095 to ATS‑34 and 154CM, the trio breaks down what makes certain steels shine, and why heat treatment, grind geometry, and blade thickness matter more than flashy marketing. They explore how polishing affects drag, how patina tells a knife’s story, and why even the humble Opinel earns its legendary cutting reputation. Whether you’re a maker, collector, or everyday carrier, this episode cuts through the hype and gets to the edge of what really defines a great knife. Topics covered: Knife steel comparisons (D2, 1095, ATS‑34, 154CM)Blade thickness vs. cutting performanceFlat, hollow, and convex grinds explainedPatina, rust, and real‑world maintenanceWhy polish and geometry matter more than brute strength #EDCTV #KnifeSteels #BladeGrinds #KnifeMaking #EDC #EverydayCarry #MultitoolOrg #KnifeDesign #KnifeMaintenance #KnifePodcast #KnifeCommunity #SteelTypes #HeatTreat #KnifeGeometry #KnifeCollectors #KnifeTalk #KnifeNerds #KnifeLife #KnifeEdge #KnifeCraftsmanship

  7. Jun 26

    What Makes a Good Knife? | Knife Steels & Grinds Explained (EP 037) (Audio)

    In this episode of EDC‑TV, Grant Lamontagne from Multitool.org sits down with Abe and Inky to dive deep into the science and craftsmanship behind knife performance. From D2 vs. 1095 to ATS‑34 and 154CM, the trio breaks down what makes certain steels shine, and why heat treatment, grind geometry, and blade thickness matter more than flashy marketing. They explore how polishing affects drag, how patina tells a knife’s story, and why even the humble Opinel earns its legendary cutting reputation. Whether you’re a maker, collector, or everyday carrier, this episode cuts through the hype and gets to the edge of what really defines a great knife. Topics covered: Knife steel comparisons (D2, 1095, ATS‑34, 154CM)Blade thickness vs. cutting performanceFlat, hollow, and convex grinds explainedPatina, rust, and real‑world maintenanceWhy polish and geometry matter more than brute strength #EDCTV #KnifeSteels #BladeGrinds #KnifeMaking #EDC #EverydayCarry #MultitoolOrg #KnifeDesign #KnifeMaintenance #KnifePodcast #KnifeCommunity #SteelTypes #HeatTreat #KnifeGeometry #KnifeCollectors #KnifeTalk #KnifeNerds #KnifeLife #KnifeEdge #KnifeCraftsmanship

  8. Jun 19

    What Makes a Good Knife? | Blade Shapes for Total Newbies (EP 036) (Video)

    Whether you’re brand new to knives or you’ve been carrying for years, this episode kicks off our multi‑part Beginner’s Guide to Knives series with a deep dive into blade shapes- what they are, why they matter, and how to choose the right one for real‑world use. Grant, Abe, and Inky break down the fundamentals in a way only EDC‑TV can: real talk, real experience, and a little bit of chaos. We cover clip points, drop points, sheepsfoot blades, utility profiles, and why geometry, steel, and heat treat all matter more than most people think. If you’ve ever wondered what makes one knife “better” than another, this is where your journey starts. Featuring: • Grant Lamontagne (Multitool.org) • Abe Elias (Blade Magazine Field Editor, Diving Sparrow Knifeworks) • Inky Chris (Resident Agent of Chaos) In this episode: • What makes a blade “good”? • Clip point vs drop point vs sheepsfoot • Why blade geometry matters • How steel, heat treat, and design all work together • Real‑world examples, jokes, and questionable life choices #EDCTV #EverydayCarry #KnifeCommunity #KnifeTalk #KnifeBasics #BeginnerKnives #BladeShapes #EDCgear #MultitoolOrg #KnifeNerds #OutdoorGear #KnifeLife #PocketKnives #KnifeEducation #GearTalk #KnifeReview #KnifeDesign #EDCDiscussion

See All (83)

About

Three industry veterans dive into the world of pocket knives, multitools, flashlights, and all things EDC. Insightful discussions, insider stories, and expert takes on the gear you carry every day. EDC TV is brought to you by the fine folks at Multitool.org, aka The Only Forum That Matters.

Information

  • Creator
    Grant
  • Years Active
    2025 - 2026
  • Episodes
    83
  • Rating
    Explicit
  • Copyright
    © 2025 Grant

You Might Also Like