The Aussie Motorhome & RV Show: Powered by RV 3D

Wes
  • 0.0 (0)
  • Automotive
  • Updated Weekly

Daily briefings for life on the open road from the team at RV 3D. Whether you’re on the Big Lap or fine-tuning your off-grid setup, we deliver practical insights, maintenance tips, and Australian RV industry updates. We break down custom 3D-printed upgrades, tackle why factory parts fail, and show how high-durability PETG 3D printing can bulletproof your layout with mods you thought weren’t even possible—especially for the Jayco RM20-5. No fluff, just modifications designed to survive the harsh Australian sun and rough corrugated tracks. Visit https://www.rv3d.com.au

Episodes

  1. 1d ago

    Episode 4: PETG vs The Aussie Sun: Why Standard 3D Prints Melt and What Actually Works

    Cheap 3D printed parts fail in Australian conditions — not because 3D printing is unreliable, but because the wrong material was used. We cover PLA versus PETG, heat resistance, UV stability, and what to ask any supplier before you fit their parts to your rig. Powered by RV 3D. rv3d.com.au

    5 min

  2. 5d ago

    Episode 3: The Towing Weight Crisis: Compliance and Safety on Australian Highways

    G'day and welcome back to The Aussie Motorhome and RV Show! It is the biggest talking point on Australian roads right now: transport authorities and highway patrols are cracking down hard on overweight rigs. With modern caravans and motorhomes packed full of heavy accessories, water tanks, and gear, it is terrifyingly easy to accidentally roll over your legal limits. In this episode, we unpack The Towing Weight Crisis. We break down exactly what ATM, GTM, GVM, and GCW mean in plain English, the massive safety risks of running overweight on corrugated roads, the insurance nightmares of non-compliance, and how to properly audit your rig’s weight before your next big trip. Show Notes & Links: Powered by RV 3D: Looking to shave unnecessary weight off your setup or need custom, lightweight structural storage solutions? Check out our Australian-made 3D printed parts at rv3d.com.au.Subscribe: Enjoying the show? Hit that follow button so you never miss an episode on safety, upgrades, and gear designed for the toughest roads.Keywords: caravan towing weight, GVM upgrade Australia, legal towing limits, overweight caravan fine, ATM GTM explained, highway patrol weigh station, caravan safety, RV compliance.

    4 min

  3. 5d ago

    Episode 2: Freezing Nights in a Motorhome: The Ultimate Guide to Winter Camping in Australia

    G'day and welcome back to The Aussie Motorhome and RV Show! When people think of travelling Australia, they usually think of sun-baked beaches and blistering outback heat. But if you've ever spent a July night in the High Country, the Flinders Ranges, or even the inland deserts, you know just how brutal an Aussie winter night can be in an uninsulated rig. In this episode, we deliver the Ultimate Guide to Winter Camping. We dive into practical ways to keep your motorhome warm when the temperature plummets, troubleshooting common cold-weather technical failures, managing internal condensation, and protecting your plumbing from freezing up overnight.Show Notes & Links: Powered by RV 3D: Don't let harsh weather stop your adventures. From custom brackets to tough, UV-stable, and impact-resistant functional parts, see how we keep you moving at rv3d.com.au.Subscribe: Hit follow to get practical advice built specifically for Australian conditions delivered straight to your feed every week!Keywords: winter camping Australia, motorhome heating, caravan insulation, freezing weather RV, diesel heater maintenance, RV condensation, caravan winter tips, Flinders Ranges camping.

    5 min

  4. 5d ago

    Episode 1: Fixing Obsolete RV Parts with 3D Printing for Aussie Conditions

    G'day and welcome to the very first episode of The Aussie Motorhome and RV Show! Australia has some of the toughest environments in the world for recreational vehicles. From bone-jarring corrugations to blistering summer heat, our rigs take a beating—and when a small plastic trim, bracket, or gear snaps on an older model, finding a replacement can be a nightmare. In this episode, we tackle The Obsolete Part Problem. Discover how custom 3D printing is revolutionising the RV industry by keeping classic and out-of-production motorhomes, caravans, and campervans firmly on the road. We look at why standard overseas replacements often fail in Aussie conditions and how modern tech is saving owners thousands in costly fabrications. Show Notes & Links: Powered by RV 3D: Need a custom, fitness-tested, or obsolete part replicated for your rig? Visit us at rv3d.com.au to see how we help Australian travellers stay on the move. Subscribe: Don't forget to hit follow so you never miss an episode of practical advice built for Australian conditions! Keywords: motorhome repairs, caravan parts, Australian RV, 3D printed caravan accessories, obsolete RV parts, Jayco repairs, motorhome maintenance, 3D printing Australia.

    5 min
  • 4 Episodes

About

Daily briefings for life on the open road from the team at RV 3D. Whether you’re on the Big Lap or fine-tuning your off-grid setup, we deliver practical insights, maintenance tips, and Australian RV industry updates. We break down custom 3D-printed upgrades, tackle why factory parts fail, and show how high-durability PETG 3D printing can bulletproof your layout with mods you thought weren’t even possible—especially for the Jayco RM20-5. No fluff, just modifications designed to survive the harsh Australian sun and rough corrugated tracks. Visit https://www.rv3d.com.au

Information