Wood Talk | Woodworking

The Wood Whisperer

A woodworking show for modern woodworkers and makers. Join Marc Spagnuolo, Shannon Rogers, and Matt Cremona for a light-hearted look at the latest news, tips, and tricks from the world of woodworking. Hosted on Acast. See acast.com/privacy for more information.

  1. 1d ago

    Bandsaw Blade Rules and Wives' Tales | WT619

    On today's show, we're talking about whether to detension bandsaw blades, using PAM on a bandsaw blade, why lumber won't dry, and knots in chair parts. We also get into an alarming old jointer-sharpening method. Wood Talk is sponsored by Woodcraft. Find holiday project supplies, tools, and the November sales. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers; exclusions apply. Woodcraft: https://bit.ly/4tFHoGv Support the show and get the ad-free version (except for the Woodcraft sponsorship baked into the recording): https://www.patreon.com/woodtalk PATRON THANK-YOUS No new patron names were read because the hosts recorded #618 and #619 back to back. WHAT'S ON THE BENCH • Marc is making walnut serving trays with box joints and printed panels using the EufyMake UV printer. The printer can put photos or artwork on wood and other materials, and he even printed The Wood Whisperer logo on a metal shop key. • Matt is recovering from finishing and publishing his Built-in Breakfast Nook Bench course. Filming, edits, thumbnails, chapters, and write-ups took more work than he expected, and his shop could use a cleanup. • Shannon is making eight handmade gift boxes, picking designs at random from Matt Kenney's 52 Boxes in 52 Weeks. He's four boxes in and enjoying the change of pace. DISCUSSION AND LISTENER QUESTIONS • Bandsaw blades: Marc and Shannon lean toward detensioning between uses to ease loads on saw components; Matt leaves his tensioned and has not noticed a problem. The group was skeptical of PAM cooking spray because it stays oily and may contaminate wood. They would like Alex Snodgrass’s view. • Anthony’s damp lumber: At about 50% relative humidity, Matt expects roughly 10% equilibrium moisture content. Improve airflow and stickering, test on a planed surface, and use an oven-dry sample when precise readings are needed. • Tony’s knot in a chair part: Shannon would judge the loads and grain first. A bored-out plug or revised joint layout might work in some locations, but remaking a load-bearing piece may be safer. WOODCRAFT NEWS AND DEALS • Woodcraft has holiday project kits for cutting boards, knives, turning, ornaments, and boxes. • Early Black Friday sale prices begin Friday, November 20, with deals on select Jet, Laguna, and Rikon machinery. Check each offer's terms and dates. • SawStop has an instant rebate of up to $500 on eligible new table saws through January 3. • Woodcraft thanked everyone who joined Turn for Troops. Since 2004, more than 250,000 pens have gone to U.S. service members; ask a store about year-round pen donations. • Woodcraft teased a new announcement for a later episode. No product details were disclosed in #619. WOODCRAFT EVENTS AND CLASSES • November 20, Roanoke, Virginia: Alex Snodgrass seminar. The November 21 box class was reported sold out. Ask the store about current seminar space. • November 21–22, Downingtown, Pennsylvania: Build Your First Cabinet with Tom Temple https://www.woodcraft.com/pages/store-classes/downingtown • November 21, Omaha, Nebraska, 2–4 p.m.: Wood pen-turning class with Grayson Truax. https://www.woodcraft.com/pages/store/omaha • November 28–29, Raleigh, North Carolina, 9 a.m.–4 p.m.: Woodworking Fundamentals https://www.woodcraft.com/pages/store-classes/raleigh • Contact each store for space, prices, and registration. LINKS AND RESOURCES • Woodcraft holiday projects and sale information: https://www.woodcraft.com/ • Wood Talk newsletter: https://twwg.kit.com/94f711bd6f • EufyMake UV printer: https://www.eufymake.com/ • The Wood Whisperer Guild: https://thewoodwhispererguild.com/ • Wood Talk Patreon: https://www.patreon.com/woodtalk • Platform Woodcraft sponsor link: https://bit.ly/4tFHoGv CONTACT Questions: https://woodtalkshow.com/ or woodtalkshow@gmail.com Instagram: • @woodtalkshow • @mattcremona • @woodwhisperer • @renaissancewoodworker Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  2. Nov 4

    Can AI Change How Woodworkers Design Furniture? | WT618

    Can AI Change How Woodworkers Design Furniture?Welcome to Wood Talk #618! On today’s show, we’re talking about finishing a squatty potty, troubleshooting planer dust collection, Russian birch, and Sketchup alternatives. Wood Talk is proudly sponsored by Woodcraft! Stop by your local store November 7 and 8 to turn a pen for a U.S. service member. Use code WT2026 for 10% off regularly priced merchandise. (Can’t be combined with other offers, exclusions apply). Our show is also sponsored by the generous contributions of people like you. Support us and get an ad-free version of the show at Patreon.com/woodtalk. Thanks to our newest Patrons: Jordan GinebaughJames RobertsAndrei ZmievskiNews and AnnouncementsMarc: Released a new video on his walnut dining table build and angled joinery.Matt: Launched his Built-in Breakfast Nook Bench course.KickbackLarry: Shared the story of a blanket rack project he started in 1992 that he's still working on!Group DiscussionThoughts on Sketchup alternatives for designing furniture, including Hew and IngeTrazo.QuestionsJohn: What finish would you use for a squatty potty?Scott: Planer keeps bogging down and leaving huge piles of chips on 12-inch wide 10/4 walnut slabs. Is it a planer issue or a dust collection issue?Bob: How is Baltic birch currently getting out of Russia?Links and ResourcesHew 3DIngeTrazoTurn for Troops DetailsWoodcraft Events and DealsTurn for Troops (Nov 7-8): Turn a pen for a U.S. service member. Woodcraft provides the equipment and instruction for free.JessEm Demo Days (Nov 13-14): 15% off JessEm products in-store, tool demos, and a sweepstakes.Local Woodcraft Events and ClassesTurn for Troops (Nov 7-8): At stores nationwide.Alex Snodgrass Tour: Nashville (Nov 5-7), Chattanooga (Nov 8), Baltimore (Nov 13-14).Contact the ShowSend questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone at woodtalkshow@gmail.com. You can find us individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  3. Oct 21

    Bandsaw Mill Curious | WT617

    Bandsaw Mill CuriousWelcome to Wood Talk #617! On today’s show, we’re talking about a cutting method for small parts, a faster way to make picture frame stock, and annealing steel. Wood Talk is proudly sponsored by Woodcraft! Woodcraft is your trusted source for quality woodworking machines and power tools. Use code WT2026 for 10% off regularly priced merchandise. (Can’t be combined with other offers, exclusions apply). Our show is also sponsored by the generous contributions of people like you. Support us and get an ad-free version of the show at Patreon.com/woodtalk. Thanks to our newest Patrons: BarrDylan ElderBC SpearNews and AnnouncementsExplanation of the last show.We raised over $25k for the PHP!What’s on the BenchMarc: Filmed Dave Boyt and Norwood Sawmills.Matt: Not much.Shannon: Wall shelf.KickbackVon Welch: Finished his workbench.Eric Pellerin: Found purpose in a local makerspace.QuestionsTom: What size dumbbells to use for adding weight to large glue-ups?Joseph: Safe ways to cut small, thin parts on manual miter saws.Mitch: How to speed up cutting rabbets and roundovers on picture frame stock.Stephen: Advice on annealing and re-hardening steel for hand tool restoration.Links and ResourcesHarvesting Backyard Exotics with Dave BoytHorn Dog MapsWoodcraft Stained Glass CollectionLocal Woodcraft Events and ClassesMinneapolis, MN: Electric Guitar Design (Oct 20).Salt Lake City, UT: Halloween Carving Classes (Oct 22, 24).Orlando, FL: Fall Extravaganza (Oct 30-31).Lexington, KY: Stained Glass Pumpkin Workshop (Nov 1).Alex Snodgrass Tour: MN, WI, IL, and WV dates between Oct 22-31.Contact the ShowSend questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone at woodtalkshow@gmail.com. You can find us individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  4. Oct 7

    Should I Buy A Jointer? | WT616

    Wood Talk #616, Should I Buy a Jointer? On today’s show, we’re talking about whether you should buy a jointer, glue-up strategies, and shop walls. Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply. The show is also supported by the generous contributions of our patrons. You can support the show and get the ad-free version at Patreon.com/woodtalk. This week, we thank: Stephen StriblingKatherine SanbornMichael BatemanJordan NeedlesSign up for the Wood Talk Newsletter. What’s on the Bench Marc decided to go with the two-saw setup and is trying to make that happen.Matt is working at the sawmill.Shannon took a New York trip and saw expensive stuff.Kickback Chris at Lazy Gretl Wood Works follows up on the metric vs. imperial discussion and points out that relative measurements do a lot of the precision work in a project.Jonathan P. Szczepanski writes in to thank the guys for the talk and levity during a rough morning.Chris Williams suggests that someone who uses both metric and imperial in the shop should be called a hybrid woodworker.Philip writes from Northern Ireland as a proud imperial user, even though he learned metric in school and still uses metric when needed.Questions Brian asks whether he should use drywall, plywood, or something else for the walls in his new walkout basement shop.Jason asks whether he should buy a jointer, cram in a jointer/planer combo, or keep using his planer sled, track saw, and table saw workflow.Mick asks about keeping parts aligned during glue-up and how to handle squeeze-out when clamps are in the way.Links and Resources WoodcraftWood Talk NewsletterWoodcraft Events and Deals October 9 and 10, in-store Woodpeckers event: Tool demos and 15% off Woodpeckers products in-store only.In-store sweepstakes: Prizes include an Adjusta-Joint Box Joint Sled, an in-DEXABLE Miter Sled with Drop Zone, and a Woodcraft gift card. No purchase is necessary.Local Woodcraft Events and Classes Lexington, Kentucky: Free Turn-N-Learn demo, Thursday, October 8, from 4 to 6.Boise, Idaho: Woodpeckers tool demo, Saturday, October 10, from 1 to 2.Pelham, Alabama: Free Turn & Learn demonstration, Thursday, October 15, from 4 to 6.Charlotte, North Carolina: Cheese slicer and cutting board demo, Saturday, October 17, from 1 to 2.Store Classes and Events: Check your local Woodcraft store at Woodcraft.com.Contact the Show Send questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to woodtalkshow@gmail.com. You can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  5. Sep 17

    Why We Don't Use Metric | WT615

    On today’s show, we’re talking about whether it’s finally time to go metric, using live oak for a workbench and dining table, and the Jointmaker Pro. Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply. The show is also supported by the generous contributions of our patrons. You can support the show and get the ad-free version at Patreon.com/woodtalk. This week, we thank: John EmersonChrisTim DahlSign up for the Wood Talk Newsletter. What’s on the Bench Marc has been working on maker space upgrades and PM2000 fixes.Matt is getting ready for sawing.Shannon is doing fall cleaning, and his air filter finally gave up.Kickback Kyle follows up on the smoke detector question from episode 614. He installed a flame detector in his garage because he has lawn care batteries, two EVs, and a whole-home battery backup in there. It detects actual flame instead of smoke, and it sends him a phone notification.Questions Mick Monahan asks whether it’s finally time to switch woodworking over to the metric system.John Emmerson asks whether California live oak makes sense for a Roubo workbench, a dining table, and whether its density affects the finishing plan.Lars asks Shannon when he actually uses the Jointmaker Pro and whether it earns its keep in a shop that already has a full set of tools.Links and Resources WoodcraftWood Talk NewsletterFlame DetectorWoodcraft Deals All Rikon bandsaws are 10% off through September 30.Starrett bandsaw blades are 20% off through September 30.Local Woodcraft Events and Classes September 18 and 19, participating Woodcraft stores: Kreg Demo Days.September 19, Richmond, Virginia: Art of the Blade Festival.September 24, Columbus, Ohio: Turning a Fishing Lure.September 25 through 29, New England: Alex Snodgrass continues his Maximizing Your Bandsaw tour.September 26, St. Louis, Missouri: Woodcraft’s Maker’s Resource Event with Marc Spagnuolo, the St. Louis Woodworkers Guild, and local makerspaces.Store Classes and Events: Check your local Woodcraft store at Woodcraft.com.Contact the Show Send questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to woodtalkshow@gmail.com. You can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  6. Sep 1

    It’s Too Long and Bendy | 614

    On today’s show, we’re talking about smoke detectors in the shop, whether it’s worth upgrading dust collection ducting, and double-sided tape. Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply. The show is also supported by the generous contributions of our patrons. You can support the show and get the ad-free version at Patreon.com/woodtalk. This week, we thank: Levi McNettJim at the.accidentalwoodworkerSooner WoodworkingNews and Announcements Sign up for the Wood Talk Newsletter.The Guild Back to School Sale ends September 4.All episodes are now on the website.SawStop has a bandsaw.Harvey has the Dream Saw.What’s on the Bench Marc pivoted from Ava’s bed to the laundry room.Matt is working on a coffee table.Shannon is selecting veneer for a tabletop.Kickback Von Welch tested the advice about not running an air filter until leaving the shop. His air quality meter showed the air got worse for about a minute, then quickly improved. He now runs the air filter while making dust and leaves it on a timer after he’s done.Questions Vaibhav asks how to handle smoke detectors in a garage shop when sawdust can set them off, but fire risk from lithium batteries and oily rags is still a concern.Chris asks whether upgrading from HVAC ductwork to Nordfab ducting is worth it for a new shop with a 3HP Oneida cyclone and several large machines.Keith asks what brand of double-sided tape to use for templates.Links and Resources WoodcraftWood Talk NewsletterWoodcraft 2" Double-Sided TapePermacel Double-Sided TapeLocal Woodcraft Events and Classes September 9, Allentown, Pennsylvania: Alex Snodgrass presents his Maximizing Your Bandsaw seminar from 5:30 to 6:30 PM.September 12, Sacramento, California: Woodturning, Segmented Screwdriver runs from 9:30 AM to 4:30 PM.September 12, Parkersburg, West Virginia: Beginner Leather Keychain class runs from 10 AM to 1 PM.September 13, Minneapolis, Minnesota: Tiny Dwellings, Beginning Bark-House Carving runs from 10 AM to 4 PM.September 14, Downingtown, Pennsylvania: Alex Snodgrass brings his Maximizing Your Bandsaw seminar to Downingtown from noon to 1 PM.Store Classes and Events: Check your local Woodcraft store at Woodcraft.com.Contact the Show Send questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to woodtalkshow@gmail.com. You can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  7. Aug 19

    Shove a Kregger in the Hole | 613

    On today’s show, we’re talking about finding a woodworking mentor, leaning bench dogs, and turning riven oak into boards. Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply. The show is also supported by the generous contributions of our patrons. You can support the show and get the ad-free version at Patreon.com/woodtalk. This week, we thank: Ben DadoverDick KnottsPhil McCrackenSign up for the Wood Talk Newsletter. What’s on the Bench Marc started messing with Gridfinity and is wondering whether that was a mistake.Matt is between things.Shannon shellacked his chest, and now the girls all swoon.Kickback Alexander Hähnsen asks whether the best Wood Talk listening experience is to keep working backward from newer episodes or go all the way back to episode 1.Kyler Goodwin and Dave suggest using an ozone generator to help remove the odor from Shannon’s chest of drawers, with the warning that ozone needs to be used carefully because it is harmful to breathe.Questions Brandon asks how to find a woodworking mentor, how to avoid asking for too much unpaid time, what a developing woodworker can offer in return, and what a healthy mentoring relationship looks like.Josh asks how to turn split, wedge-shaped oak log sections into straight boards when there’s no flat reference edge and no way to get the logs to a sawmill.John asks whether old Wood Talk episodes are still available and whether round bench dog holes for a Benchcrafted tail vise should be drilled at a 2-degree angle.Links and Resources WoodcraftWood Talk NewsletterKreg Edge early access through WoodcraftLocal Woodcraft Events and Classes Cincinnati: Intro to Scroll Saw workshop, Thursday, August 20.Washington, DC-area Woodcraft: Date Night, Friday, August 21.Harrisburg: Free Easy Wood Tools demo with Dave Schell, Saturday, August 22.Columbus: Fall meeting of the Society of American Period Furniture Makers, August 22 and 23.Seattle: 8th Annual Tool Swap, Saturday, August 29.Store Classes and Events: Check your local Woodcraft store at Woodcraft.com.Contact the Show Send questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to woodtalkshow@gmail.com. You can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

  8. Aug 5

    Reservations about Shannon | 612

    On today’s show, we’re talking about whether subscriber numbers matter anymore, cutting long miters, and pressing veneer without a vacuum bag. Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking. Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply. The show is also supported by the generous contributions of our patrons. You can support the show and get the ad-free version at Patreon.com/woodtalk. This week, we thank: Eric PellerinPeter KulupkaSign up for the Wood Talk Newsletter. What’s on the Bench Marc started a repair job for his mother-in-law on a 23-year-old project.Matt is working on a workbench base.Shannon is doing chest of drawers remediation.Kickback Gary writes in with criticism of the discussion around Shannon’s use of “off the reservation.”Michael Johnson writes in to thank the guys for that same discussion and shares why those words carry weight for many Indigenous and First Nations people.Anthony from Grey Design Workshop shares his experience using Accoya and Tricoya for exterior cupboard doors in southern England and asks whether the material is easy to get in the US.Questions Jean-Luc Desselle asks whether YouTube subscriber count still matters and whether milestones like 1 million or 500K still mean anything to the guys.Tom asks how to cut large, long miters for mitered casework that exceeds 24 inches in width or depth.Drew asks about pressing veneer without a vacuum bag, including larger cauls, screw presses, and whether multiple panels can be pressed at the same time.Links and Resources WoodcraftWood Talk NewsletterFormaligna StudioGrey Design WorkshopLumber Update, Modified WoodsLumber Update, AccoyaLocal Woodcraft Events and Classes West Springfield, Massachusetts: August 8, hands-on Festool cordless-tool demo with a factory representative.Dayton, Ohio: August 13, free CNC Users Group meeting for CNC owners, new users, and anyone who needs help with Vectric software.Minneapolis: August 14 and 15, Mystery Envelope Secret Sale, with chances to save 15% or 20% on a purchase, or 25% on one item.Store Classes and Events: Check your local Woodcraft store page.Contact the Show Send questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to woodtalkshow@gmail.com. You can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker. Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

4.8
out of 5
1,541 Ratings

About

A woodworking show for modern woodworkers and makers. Join Marc Spagnuolo, Shannon Rogers, and Matt Cremona for a light-hearted look at the latest news, tips, and tricks from the world of woodworking. Hosted on Acast. See acast.com/privacy for more information.

You Might Also Like