This Week in Maker News

The Maker's Stoop
  • 5.0（4則評分）
  • 娛樂新聞
  • 每週更新

Makers gather weekly to discuss a topic within the maker community. It is a discussion open to all! Hosted by The Makers Stoop's founder, Adrienne Vita.

集數

  1. 2023/04/25

    Collab Chatter

    Welcome to another episode of This Week in Maker News brought to you by The Driverback. This week our host Adrienne Vita is joined by John, Nathanael, Adam and someone new this week, Gary! This week we talk about our current Maker Collab projects as well as past project that were submitted. If you don't know about the Maker Collab, it is a maker competition put on by Christy from @oakhillmillworks and Nick from @statedwoods this time every year. Be sure to check out those pages and give them a follow. They are all extremely talented and so are the makers that are in the competition. Please give the following accounts a follow because each follow helps us spread out a little more and we want to be able to get more and more makers on to give us there different thoughts and ideas! Thanks to everyone who has been following along so far and welcome to those who are new! The Maker's Stoop - @themakerstoop Adrienne - @hickoryhomesteadcreations Adam - @rock_dingo_woodcraft Nathanael - @nathanael_barnes John - @johndiresta Gary - @garebearwoodworks Then next time you find yourself searching for that one bit you need most, stop and head right to thedriverback.com and use our code STOOP to save yourself money off everything on the site! OUR CODE ONLY DOES THIS! Sweet I know! DRIVERBACK consists of four bit cartridges, each with their own storage tray, retractable lanyard and four custom fabricated impact rated bits of your choice. This system allows you to comfortably store up to four of your most used hex bits right where you need them, on your impact driver!    Your DRIVERBACK system comes pre-loaded with your selection of four impact rated bits and is designed to fit most any impact driver on the market, regardless of brand. Replacement and additional cartridges of your choice are also available for maximum customization. Simply strap DRIVERBACK to your impact driver according to the included instructions and be prepared to start saving time.   Once installed, you simply select the impact bit you require, pull the bit by the lanyard tab from the storage tray, insert the bit in the quick release chuck, and you are "Always Ready For Your Next Screw!"

  2. 2023/03/28

    Recap WBC with a Full House

    Welcome to our fifth episode of This Week in Maker News made possible by our good friends at DRIVERBACK! DRIVERBACK consists of four bit cartridges, each with their own storage tray, retractable lanyard and four custom fabricated impact rated bits of your choice. This system allows you to comfortably store up to four of your most used hex bits right where you need them, on your impact driver! Once installed, you simply select the impact bit you require, pull the bit by the lanyard tab from the storage tray, insert the bit in the quick release chuck, and you are "Always Ready For Your Next Screw!" Please join us as we recap WBC with Brandon and talk about upcoming maker events. The conversation stays busy and we get in some really good laughs. Be sure to give this episode a listen and be sure to let us know what you think! If you hear something that needs a correction, always feel free to reach out. And as always, please give us a follow at our IG's provided below! Thanks! The Maker's Stoop - @themakersstoop Adrienne - @hickoryhomesteadcreations Nathanael - @nathanael.barnes Adam - @rock_dingo_woodcraft John - @johndiresta Terry - @lawncrosser Brandon - @madduxwoodworks

  3. 2023/03/16

    Does the Algorithm Even Care?

    I am joined this week by Nathanael, Adam and John. We focus this week on talking about the algorithm and if it is worth it to post to its pleasure. You know the usual trio but this week we had a not-special guest, John DiResta, infamously known as Jimmy's brother. Kind of like being Chris Rock's brother if you catch my drift. I will tag everyone's pages below so be sure to give them a follow. And don't forget about our wonderful sponsor Driverback. DRIVERBACK consists of four bit cartridges, each with their own storage tray, retractable lanyard and four custom fabricated impact rated bits of your choice. This system allows you to comfortably store up to four of your most used hex bits right where you need them, on your impact driver! Use code HICK to save on your order!  Instagrams  The Maker's Stoop - @themakersstoop Adrienne - @hickoryhomesteadcreations Nathanael - @nathanael_barnes Adam - @rock_dingo_woodcraft John - @johndiresta

  4. 2023/02/28

    Inspiring Podcasts

    Please join me, Adrienne, as I'm joined by Nathanael, Adam, Priscilla, Luke and Patrick! Full house and full of laughs and good conversation. There were so many good podcasts brought up from different topics, not just maker related. Make sure to listen to hear your favorite podcast or maybe even one you've never heard of before. If you could follow today's crowd that would be greatly appreciated! Everyone has worked so hard and every little bit counts. Adrienne - @hickoryhomesteadcreations @themakersstoop Nathanael - @nathanael_barnes Adam - @rock_dingo_woodcraft Priscilla & Luke - @plsmithed @andtheymake @priscillapalmieri Patrick - @patrickgensel Be sure to give us a review and follow the podcast so you never miss an episode!

  5. 2023/02/22

    The Sharpest Trends

    Do you stay up to date with all the maker trends on Instagram. Listen to Adrienne, Nathanael and Adam discuss some recent trends or some other interesting topics. We would love for you guys to give The Maker's Stoop a follow on IG as well as the hosts @hickoryhomesteadcreations, @nathanael_barnes, @rock_dingo_woodcraft. A 5 star review also helps us too! Thanks for listening!

  6. 2023/02/16

    Loosey Goosey

    This week in maker news I chat with Nathanael and Justin about WorkbenchCon and other small topics that come up. Thank you for giving us a listen and looking forward to seeing where this goes! Visit us at @themakersstoop @hickoryhomesteadcreations @nathanael_barnes @calvarycustoms

    Loosey Goosey
  • 共 6 集

評分與評論

5
（滿分 5 顆星）
4 則評分

簡介

Makers gather weekly to discuss a topic within the maker community. It is a discussion open to all! Hosted by The Makers Stoop's founder, Adrienne Vita.

資訊

  • 創作者
    The Maker's Stoop
  • 活躍年代
    2023年
  • 集數
    6
  • 年齡分級
    兒少不宜
  • 版權
    © The Maker's Stoop
  • 節目網站
    This Week in Maker News