Holmz Law Radio

Holmz Law
  • 5.0 (3)
  • How To

Teaching Electricians all about conduit bending and Electrical Work.

  1. 09/14/2022

    3 Major Steps To Learning how to Bend Conduit Correctly and Quickly.

    M3 major steps to learning how to bend conduit If you follow these 3 steps in the order that I explain them. You will learn how to bend the correct way and by the time you start to actually bend conduit and using all 3 types of benders you will already have an understanding of the major parts of bending conduit. By learning the 3 major steps first before you start bending you can dedicate all your time to learning techniques and more advanced tips and tricks to conduit bending. You don't need to waste your time trying to figure out how to measure correctly or how to layout runs or what the multipliers or deductions are. You can just keep building onto your skills. Once you start to use the benders make sure to keep a little pad on you all the time. Especially when using the electric bender or hydraulic bender. You can keep notes to anything you feel you need to remember. You can write notes down to anything you want to write in your pad. They are your notes and you are writing anything down that you want.  Please follow me on all major platforms. I'm on linkedin as well please follow and endorse me under the skills section of my profile.  My LInkedin account My Youtube Channel

  2. 05/29/2022

    Conduit Bending - Bad Habits Pt. 1

    In this podcast listen as I talk about some of the bad habits we as apprentices may carry on for the rest of our careers if we don't catch ourselves now and stop. I'm talking about those habits we tend to do when first starting to bend conduit. There will be plenty of more episodes to this series of podcast, I'm almost sure of it. As time goes by and I continue to teach I'm sure things will come up on my mind or I'll just notice other young apprentices doing on the job. In which case I'll will bring it here to you my audience. Thanks and i hope you enjoy the show. I go live every Sunday at 9pm eastern. I will do my best to try and record it and post it here for you. If you ever want a question answered or a topic discussed than simply post on any of my social medias or better yet on my Discord Server if you are a part of the community. You can contact me almost anywhere as i'm on almost all social medias. I've recently shared my www.linkedin.com/in/melvin-rubio account also which is another platform you can reach me so if you haven't followed me there yet please do. Thanks again. To support the channel, the links are below www.venmo.com/MelRub480v https://www.amazon.com/hz/wishlist/ls/3USV777CSA504?ref_=wl_share view and edit Holmz Law Amazon wish list https://www.amazon.com/hz/wishlist/dl/invite/i5Nkf58?ref_=wl_share Please follow me on these social medias and communities: Facebook/holmzlaw Facebook/The Art of Conduit bending Instagram/holmzlaw Linkedin.com/in/Melvin-Rubio Twitter/holmzlaw Tradehounds/holmzlaw Reddit/holmzlaw Reddit/r/conduitology Discord https://discord.gg/ntkfmC3Vq4

    Conduit Bending - Bad Habits Pt. 1

  3. 05/28/2022

    Conduit Bending - When to use different 3 point saddle and/or different degrees for offsets

    In this podcast i'll get into when you should use different types of 3 point saddles in regards to the degrees you choose to bend them. Also i'll get into a little bit about when and why you should use different degrees for your offsets as well.

  4. 02/07/2022

    Conduit Bending - Should I bend my conduit?

    "Just because you know how to bend, doesn't mean you always should!" Words that explain how I think when I work with conduit.  Listen as I explain myself and how I learned to reach a level of conduit bending that has made my work look great and at the same time save time while still producing great work.  Check out my youtube channel and find me on all social media. Support Holmzlaw by telling your co-workers and friends

    Conduit Bending - Should I bend my conduit?

  5. 08/30/2021

    Electricians - How to become the top 10% of your company. In a non-union shop.

    This is for those electricians that may be an apprentice in a new company. Or if maybe you just switched companies and you are the new guy in the company. This can also be for the electrician that maybe has been overlooked for quite some time and hasn't been given a raise.  If you are an apprentice or just an electrician that want's to climb the ladder as fast as possible and with that want a substantial pay raise then listen to what I have to say in this most requested podcast. You check out my youtube/c/holmzlaw content on conduit bending. I'm on all social medias and I have a Discord Server where I host live Q&A sessions friday night's at 9pm eastern. You can DM me your questions as well on any social media and i'll answer them on my Discord Server. I will post a link below to the server if you are not already a member. Thanks and I hope this helps. Dedicated to John S. this one's for you I hope this helps.

  6. 06/21/2021

    On The Job Training W/ Holmz Law - GooseNeck Bend Ep. 3

    GooseNeck Bend Episode 3 This is the new Innovative way of learning how to bend with me Holmz Law as your coach. I got rid of all the non sense and just give you a step by step guide on how to bend the Gooseneck step by step. You can press play and listen in with your ear bud or phone speaker. Notice that i say ear bud so that you don't use both ear buds. You must always pay attention to your surroundings at all times. Anyway i hope you enjoy the podcast. Please send me any suggestions to the social media down below. Also there are plenty of communities that i've created so that you can get your questions answered. By far the best place to catch me on a one on one is Discord i'm always live if not I will answer your questions ASAP so you can just post it in one of the rooms preferably Conduitology 101. Thanks and i hope this helps. Send me your request for the next bend. Facebook/holmzlaw facebook/the art of conduit bending instagram/holmzlaw Twitter/holmzlaw Tradehounds/holmzlaw Reddit/holmzlaw Reddit/r/conduitology Discord https://discord.gg/ntkfmC3Vq4

    On The Job Training W/ Holmz Law - GooseNeck Bend Ep. 3

  7. 05/19/2021

    Audio Step by Step: 4 Point Saddle Edge of Obstruction Method

    In this Podcast i will direct you in the process of measuring, calculating, laying out and bending a 4 point saddle step by step w/ me as your Journeyman. Just as if i was right there coaching you. Its kind of like On The Job Training. Anyhow just so you know I do not get into the multipliers or what the shrink constants are for certain degree of bends. If you do not know these values i suggest you find them before you play this podcast because i do not go into it extensively at all. Thats something you should already know if you are attempting to bend a 4 point saddle.  Please consider supporting the youtube and podcast channel with your friends and co-workers. Thank you. Paypal.me/melrub480v www.venmo.com/MelRub480v https://www.amazon.com/hz/wishlist/dl/invite/9WxUHfS?ref_=wl_share Follow me on: Facebook @Holmz Law https://www.facebook.com/groups/conduitology/Follow    IG @Holmz Law   Tiktok @Holmzlaw snapchat/Holmzlaw Discord - https://discord.gg/sPMGse5wmq LinkedIn/MelvinRubio

  8. 05/08/2021

    3 Point Saddle Push-Thru Method- Step by Step Audio Guide

    In this podcast I personally walk you through the 3 point saddle just as if i was right there with you teaching you and guiding you. Its the best way to learn if you are on the job. You can place it on speaker or on your headphones and just bend step by step with me as your host. Thank you and i hope this helps. Please consider supporting the youtube channel.

See All (34)

Trailers

Ratings & Reviews

5
out of 5
3 Ratings

About

Teaching Electricians all about conduit bending and Electrical Work.

Information

  • Creator
    Holmz Law
  • Years Active
    2020 - 2022
  • Episodes
    34
  • Rating
    Explicit
  • Copyright
    © Holmz Law
  • Show Website
    Holmz Law Radio