65 episodes
ModelGeek's Podcast ModelGeek
-
- Leisure
-
-
5.0 • 114 Ratings
-
Hey Modelers! Welcome to the ModelGeeks Scale Modeling Podcast, a place where we talk about anything and everything relating to models. Buckle up for what we believe will be an exciting journey into the world of scale modeling. It doesn’t matter whether you’re new to the hobby or you been around since Moses nor does it matter what you build; planes, armor, ships or automobiles, we hope to have a little bit for each of you.Our format is simple and to the point; modeling news you can use, a few tips and techniques, some lighthearted banter and maybe a beer or two, but most importantly interaction with you! That interaction starts with you, you see, we really want to make this content for you the listener so please, drop us an email at contact@modelgeekspodcast.com and weigh in on whatever our show topic is. You can find it at the ModelGeeks Facebook Page or our website, www.modelgeekspodcast.comIn closing, thanks to all the ModelGeeks out there, we really hope that you will download and make us a regular part of your modeling bench sessions. Keep on building, be excellent to each other, and by all means... Build something! Out from the Geeks...
-
ModelGeeks Episode 64; "Marked Safe from Nats drama Today".
Welcome to Episode 64 of The ModelGeeks Podcast!
In this episode, the Modelgeeks give their thoughts for the final time on the fallout from the San Marcos NATS. Listen as the Geeks give their thoughts and solutions to some of the most polarizing issues with the national contest. The geeks give a roundup of what is on their benches run through some listener email. The other geeks give Whitey the "business" as he was the only Geek not to make the Nats in San Marcos.
Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:
https://somd-scalemodelers.club/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
Model Airplane Maker
Support the show -
Model Geeks Episode 63, "To You, Our Listeners"
Welcome to Episode 63 of The ModelGeeks Podcast!
We want this time to thank those that have made the ModelGeeks what it is today, We have been fortunate to have met some of the great people and make some dear friends over the past three seasons, and want to this time to give you a big old ModelGeeks salute.
Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:
https://somd-scalemodelers.club/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
Model Airplane Maker
Support the show
Support the show -
Model Geeks Episode 62, "San Marcos, an IPMS Nats to Remember"
Welcome to Episode 62 of The ModelGeeks Podcast!
We’re back from the 2023 IPMS USA National Convention in San Marcos TX and it was certainly one to remember. IPMS Alamo Squadron hit it our of the park this year! Join us as as El Presidente leads us through a recap our experience and hit the high (and a few low) spots from this years convention.
Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:
https://somd-scalemodelers.club/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
Model Airplane Maker
Support the show
Support the show -
Model Geeks Episode 61, "Prelude to a Nats"
Welcome to Episode 61 of The ModelGeeks Podcast!
We’re dropping this episode a few days early because in this episode we talk about the upcoming…or ongoing 2023 IPMS USA National Convention in San Marcos TX! What are we bringing? What are we looking forward to? Who’s going? Who’s NOT going? (☹ Whitey…). What is the game plan for the MGPC? Settle into the driver’s seat, keep your eye on the road, have a listen, and get there safely!
We also discuss what we are In Work on, give you a brief of what’s new out there in kits, aftermarket, upcoming shows, and other news around the hobby.
We’d also like to formally welcome el Presidente’, Tim Holland, as a permanent member of the MGPC! After sitting in on Substitute Duty for several episodes, the feedback from listers has been very positive about what Tim brings to the conversation. Once again Tim gives us the “1/72 Run-Down” as well as the latest on our upcoming inaugural club contest and show, “PAXCON 2023”, coming up this October the 7th!
Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:
https://somd-scalemodelers.club/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Bases By Bill
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
Model Airplane Maker
Support the show
Support the show -
Model Geeks Episode 60, "Zombies and Your Stash, Size Does Matter!".
Welcome to Episode 60 of The ModelGeeks Podcast!
60??? Are you freaking kidding me?
Look like we're a man down this episode. Yes, that was in the last episodes show notes but this time we're missing Frildo as he's on vacation with the Fam! So we welcome Tim Holland, AKA: El Presidente back to the mic!
We have done episodes in the past discussing the stash and tackling the subject of "size matters". Well in this episode we're going to give it a little twist!
Tim gives the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!
If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23. Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.
https://somd-scalemodelers.club/paxcon-2023/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Bases By Bill
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
IPMS Nationals 2022
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
If you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon. If you aren’t interested in Patreon and would still like to donate, then please follow the link. Support the Geeks!
If you aren’t interested in Patreon and would still like to donate, then please follow the link. Support the Geeks!
Support the show -
Model Geeks Episode 59, "Welcome Bases By Bill to the Geeks Model Shack!!".
Welcome to Episode 59 of The ModelGeeks Podcast!
Look like we're a man down this episode. Nemo is on the road again supporting the "work" load in the real world so we welcome Tim Holland, AKA: El Presidente back to the mic!
We are pleased to have the Crew from Bases By Bill join us for sit down interview. We discuss the geneses behind the company, discover some new products and future, to include NATS this year.
Tim gives the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!
If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23. Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.
https://somd-scalemodelers.club/paxcon-2023/
We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.com
Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack
We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.
Sponsors:
Detail and Scale
Furball Aero-Design
Tamiya USA
SprueBrothers
Bases By Bill
Also, if you're a real ModelGeek you'll check out the following links!
IPMS USA Events Page
IPMS Nationals 2022
Butch O'Hare Modeling Club
The Interesting Modeling Company
We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we’ll earn our wings and be able to keep up with those guys! Please check them all out at Scale Model Podcasts.
Blogs:
The Kit Box
Sprue Pie with Frets
If you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon. If you aren’t interested in Patreon and would still like to donate, then please follow the link. Support the Geeks!
If you aren’t interested in Patreon and would still like to donate, then please follow the link. Support the Geeks!
Support the show
Support the show
Customer Reviews
Conversational but instructional
What a great group of guys who love the industry. Always love the personal stories but they really hit the mark w how they work on and complete tasks regarding model making. While their building techniques vary, this podcast may be the best when it comes to explicitly explaining just how they get to where they’re going. They’re empathetic w novice builders. Add the guys banter, laughter and attempts at humor and this is an excellent podcast.
Great Listen
Great discussion topics. Always worth a listen.
Awesome podcast
Flying Aces sent me and I'm glad he did! Love the podcast Thank you!