Realm Rocketry Brennan Thompson

Although scaling is normally hard, Curtis Heisey talks today about an easier way with 3d printed parts! If you want to learn more about scaling then you might like this episode! If you have any questions about this episode, or other model rocketry things, I would appreciate it if you contacted me at bit.ly/realmrocketrycontact. You can find my website, for even more Realm Rocketry, at realmrocketry.com.

Many people (including me) were curious about what was going on with NAR events. Thankfully, Ed Lacroix, the NAR events chair, gave me the opportunity to interview him! We talked about many questions I have found in the rocketry community about NAR events, so if you are curious about NAR events I believe that you will enjoy this episode! If you have any questions about this episode, or other model rocketry things, I would appreciate it if you contacted me at bit.ly/realmrocketrycontact. You can find me website, for even more Realm Rocketry, at realmrocketry.com. You can find out more about NAR and NAR events at nar.org.

In this episode I talked about a study done by the University of Florida about rockets and lightning and what that means for us sport flyers. If you have any questions about rocketry I would appreciate it if you contacted me at bit.ly/realmrocketrycontact. A really cool thing that just happened is that you can now go to realmrocketry.com to access my website, where you can find even more Realm Rocketry!

Links:

Article: https://bit.ly/rocketsandlightning

Welcome back to Realm Rocketry! If you have any suggestions or questions, we would appreciate it if you contacted us at bit.ly/realmrocketrycontact. If you want to find our podcast then please go to realmrocketry.com. 

Do you want to level up your model rocket skills or speed up building model rockets? If so, then I think that you will enjoy this episode on using 3d printing to do just that in 4 easy steps! If you want to find out more about this podcast then please go to bit.ly/realmrocketry. I would greatly appreciate it if you took just a couple of minutes out of your day to contact me at bit.ly/realmrocketrycontact.

Note: I did not mention the Volexlab Aquila because it does not have as large of a community as the ender 3. One of the nicest things about an ender 3 is that there is a large community with lots of advice and tutorials on how to fix things for the ender 3 specifically.

Ender 3 Cura profile: https://bit.ly/3B6tq79

Test prints

3d benchy: https://bit.ly/3B4m3gr

CHEP cube: https://bit.ly/chepcube

How to level your bed: https://bit.ly/3L2dYNY

Note: I have made custom firmware with this built-in if you want the firmware for your 3d printer then feel free to contact me

3d printable upgrades

1. LCD back cover: https://bit.ly/3qrqWez this prevents dust from getting into your LCD display circuits

2. LCD front cover: https://bit.ly/3DaZmdj this helps you sleep at night because it blocks the LCD screen light

3. V slot covers: https://bit.ly/3xhGmWH this keeps dust and debris out of your v slots

4. Z-axis motor mount-adjustable https://bit.ly/3B7QYsd this improves the z-axis

5. Z axis knob https://bit.ly/3Bxa7VS

Non-printable upgrades

https://amzn.to/3U67O3q there are other bundles of upgrades like this, that work too

FreeCad: https://www.freecadweb.org

Make rocket parts easily in FreeCad: https://wiki.freecadweb.org/Rocket_Workbench

Thank you to everyone who listens to my podcast! We will see you in about a month! If you find value in our content, then please go tell people about our podcast!

Links:

Website: https://bit.ly/realmrocketry

Contact us: https://bit.ly/realmrocketrycontact