Troubleshoot Enterprise Network - Network Design - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 88

In this episode we are going to look at Troubleshoot Enterprise Network.

This activity uses a variety of technologies that you have encountered during your CCNA studies, including IPv4 routing, IPv6 routing, port security, EtherChannel, DHCP, and NAT. Our task is to review the requirements, isolate and resolve any problems, and then document the steps we took to verify the requirements.

The company replaced routers R1 and R3 to accommodate a fiber connection between the locations. Configurations from the previous routers with serial connections were modified and applied as a starting configuration. IPv6 is being tested on a small portion of the network and needs to be verified.

Note: Passwords have been removed for ease of troubleshooting in this exercise. The typical password protections should be reapplied; however, the activity will not grade those items.

We will be Verifying Switching Technologies, Verifying DHCP, Verifying Routing, and Verifying Connectivity.

Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).

Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

All my details and contact information can be found on my website, https://KevTechify.com

-------------------------------------------------------

Cisco Certified Network Associate (CCNA)

Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)

Network Design

Lab 12.5.13 - Troubleshoot Enterprise Network

Podcast Number: 88

Season: 1

-------------------------------------------------------

Equipment I like.

Home Lab ►► https://kit.co/KevTechify/home-lab

Networking Tools ►► https://kit.co/KevTechify/networking-tools

Studio Equipment ►► https://kit.co/KevTechify/studio-equipment