Welding Tips and Tricks Podcast Jody Collier, Jonathan Lewis, and Roy Crumrine

Thank you for listening to episode 274 of the Welding Tips and Tricks Podcast!  This week we're talking about Tungsten Angles.  We asked for topic ideas on Instagram last week and this was one of the many replies we received.  We go all over the place with this topic but really cover a lot of ground.  Hope it helps!  Have a great week and if you enjoy the show please subscribe on your favorite podcast apps and also share the show with others!
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 273 of the Welding Tips and Tricks Podcast!  This week we're talking about product development!  All three of us have developed a product of some kind and brought it to a small market.  We thought it would be fun to talk about some of the experiences we've had during that time and hope this conversation might spark a fire in you to bring your idea for a product to life!  
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thanks for listening to the Welding Tips and Tricks Podcast!  For this week's guest we had Aaron Biefer better known as @Bulldogwelding on Instagram!  Aaron has been a good friend of ours for a long time but we've never really known what he did for his day gig, until now!  We hope you enjoy this chat with Aaron and have a great week!  
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 271 of the Welding Tips and Tricks Podcast!  This week we're talking about Stick Rods!  Jody had recently posted a video on YouTube about different stick rods and we thought we could continue the conversation and see where it went.  Hope you can pick out a few good nuggets to help you along your way!  Have a great week everyone! 
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 270 of the Welding Tips and Tricks Podcast!  This week we had a fun chat with Mike Best from @bestfabllc on Instagram.  Mike has an interesting story on how he got into welding and started his own business.  Also, how he met Jody for the first time.  We hope you can pull a few nuggets out of this episode to help you along the way!  Have a great week! 
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week! 
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!    
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 


This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!