Hackaday Podcast Hackaday

Join Hackaday Editors Elliot Williams and Tom Nardi for a review of the best stories to grace the front page of Hackaday this week. Things kick off with the news about Raspberry Pi going public, and what that might mean for everyone's favorite single-board computer. From there they'll cover the technology behind communicating through mud, DIY pressure vessels, pushing the 1983 TRS-80 Model 100 to its limits, and the reality of 3D printing how that the hype has subsided. You'll also hear about modifying Nissan's electric vehicles, bringing new life to one of the GameCube's oddest peripherals, and an unusually intelligent kayak.
The episode wraps up with some interesting (or depressing) numbers that put into perspective just how much copper is hiding in our increasingly unused telephone network, and a look at how hardware hackers can bend the display technology that's used in almost all modern consumer electronics to our advantage.
Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!
 

What do capstans, direct conversion receivers, and fracking have in common? They were all topics Hackaday editors Elliot Williams and Al Williams found fascinating this week. If you wonder what makes an electrical ground a ground, or what a theodolite is, you should check it out.
Al struck on on the What's That Sound, but [Ferric Bueler] didn't so he scores a highly-coveted Hackaday Podcast T-Shirt. Want one? Tune in next week for your chance.
This week, the hacks came fast and furious. Capstans, instead of gears, work well for 3D-printed mechanisms, a PI Pico can directly receive radio signals, and the guys saw a number of teardowns and reverse engineering triumphs. You'll also find solid-state heat pumps, flying wings, spectroscopy, and more.
The can't miss articles this week? Learn about theodolites, a surveying feat from ancient Greece, and how fracking works.
Head on over to Hackaday for the full links!

This week, it was Kristina's turn in the hot seat with Editor-in-Chief Elliot Williams. First up in the news: Germany's solar expansion and a lot of wind have resulted in excess energy, which some people think is bad. In Hackaday news, the entries in the 2024 Business Card Challenge are really stacking up.
Then it's on to What's That Sound, which Kristina provided this week and managed to stump Elliot. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.
Then it's on to the hacks, beginning with an improved spectrometer that wasn't easy, and a rotary phone kitchen timer that kind of was. We'll talk about badges turned invitations, reinventing rotary switches, and dynamic button blobs. Finally, we get the lowdown on the state of nuclear fusion, and posit why chatting online isn't what it used to be.
Check out the links at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!
 

With Elliot off on vacation, Tom and Dan made a valiant effort to avoid the dreaded "clip show" and provide you with the tastiest hacker treats of the week. Did they succeed? That's not for us to say, but if you're interested in things like non-emulated N64 games and unnecessarily cool filament sensors, this just might be one to check out.
We also came across a noise suppressor for a leaf blower, giant antennae dangling from government helicopters, and a desktop-friendly wire EDM setup that just might change the face of machining. We waxed on about the difference between AI-generated code and just pulling routines from StackExchange, came to the conclusion that single-stage-to-orbit is basically just science fiction, and took a look at the latest eclipse from 80,000 feet, albeit a month after the fact.

What did Hackaday Editors Elliot Williams and Al Williams find interesting on Hackaday this week? Well, honestly, all the posts, but they had to pick some to share with you in the podcast below. There's news about SuperCon 2024, and failing insulin pumps. After a mystery sound, the guys jump into reverbing garden hoses, Z80s, and even ribbon cable repair.
Adaptive tech was big this week, with a braille reader for smartphones and an assistive knife handle. The quick hacks ranged from a typewriter that writes on toast to a professional-looking but homemade ham radio transceiver.
Check out the links if you want to follow along, and as always, tell us what you think about this episode in the comments!

Join Hackaday Editors Elliot Williams and Tom Nardi as they get excited over the pocket-sized possibilities of the recently announced 2024 Business Card Challenge, and once again discuss their picks for the most interesting stories and hacks from the last week. There's cheap microcontrollers in highly parallel applications, a library that can easily unlock the world of Bluetooth input devices in your next project, some gorgeous custom flight simulator buttons that would class up any front panel, and an incredible behind the scenes look at how a New Space company designs a rocket engine from the ground up.
Stick around to hear about the latest 3D printed gadget that all the cool kids are fidgeting around with, a brain-computer interface development board for the Arduino, and a WWII-era lesson on how NOT to use hand tools. Finally, learn how veteran Hackaday writer Dan Maloney might have inadvertently kicked off a community effort to digitize rare documentation for NASA's Voyager spacecraft.
Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!