The Greenhill Forge Podcast

Eric Pardini

The companion podcast to the Greenhill Forge YouTube channel, where the experiments meet the real world. Alternative energy, wood heating, metal fabrication, off-grid engineering and homesteading — the workshops, the tools, and what it actually takes to make DIY dreams real.

Episodes

  1. 1d ago

    6. choosing a wood stoves

    This week we're talking wood stoves. We've both heated with wood for decades, so this is the stuff we actually weigh when we're buying and using them. _______________________________ Welcome to the Greenhill Forge Podcast, with Eric from the Greenhill Forge YouTube channel, and my buddy Amal, a fellow builder of many trades. In this podcast we’ll talk about where the real world meets experiments in alternative energy, wood heating, metal fabrication, off-grid engineering and self sufficiency, so expect discussions about workshops, tools, fabrication, building, homesteading, and what it actually takes to make those dreams real. We’ll answer a question each week, so send yours to us at https://forms.gle/zNzKTtjDnBEupLBQA In this episode: How to choose a wood stove for your houseHow to size a wood stove to square footage and insulationOversized versus undersized stoves, and why running one too cool causes creosoteHow long to season firewood, how much wood a winter takes, and where to get itPrimary heat versus an occasional fireSecondary-burn stoves versus catalytic stovesSteel versus cast iron versus soapstoneWhat to check on a used stove, and what a new one costsOutside-air kits, indoor smoke, and carbon monoxide safetyClearances and getting a stove installed safelyListener question: How did you acquire your skills and knowledge?Weekly shop tips and tricks Creosote powder: US: https://link.amazon/B0iKW8VfJ ; UK: https://shop.vitcas.com/cfc-chimney-flue-cleaner.html WATCH the podcast on Youtube at https://www.youtube.com/@GreenhillPod LISTEN on all your favorite podcast platforms. See you next week! ----------------- CHAPTERS 00:00:00 Seasoned wood, and staying ahead of a two-year supply 00:04:40 Sizing the wood stove to the house: stove size versus square footage and insulation 00:05:15 Oversized stoves, smoldering, and creosote 00:06:08 House insulation matters 00:07:43 Creosote, chimney fires, and smoke exposure 00:10:15 Sizing rule of thumb 00:11:51 Heat distribution: fans, ducting, basement furnaces, radiant floors 00:18:37 Primary heat versus occasional use 00:20:01 Wood use per winter, before and after insulation 00:21:16 Sourcing rounds and chips from tree crews 00:23:17 Single burn, secondary reburn, and catalytic stoves 00:25:01 EPA testing 00:28:24 Intake controls, exhaust dampers, and shutting a stove down 00:31:19 Carbon monoxide 00:32:08 How catalytic converters work, and the bypass 00:37:50 Fuel quality and catalytic lifespan 00:39:16 Hybrid stoves and short chimneys 00:42:53 A flue-mounted catalytic retrofit 00:47:18 After-stove modifications, heat exchangers, and insurance 00:49:15 Steel, cast iron, and soapstone 00:54:14 Repairing cracked cast iron 00:55:54 Thin sheet-metal stoves 00:56:51 Stove brands, regulation, and burn bans 01:10:05 Outside-air kits and indoor particulates 01:13:54 Listener question: How did you acquire your skills and knowledge? 01:18:52 Weekly tip: shop mice!

  2. Oct 2

    5: Bike-powered machinery: how to take power off a bicycle

    This week we’re talking about bike-powered machinery. No fabrication or welding required, tho you may find it useful. Appropedia https://www.appropedia.org/Welcome_to_Appropedia Prevention and Control of Distortion in Arc Welding (1945) https://www.youtube.com/watch?v=yhyekAvFc68 In this episode: A practical guide to turning a yard-sale bike into a power takeoff, built around an upcoming wheat thresherHow much power you can expect andWhere to begin the design processGearing, freewheels, flip-flop hubs, steel frames, and how to tension a chain that is never perfectly roundBelt drive with inner tubes versus chain, including the old chicken rotisserie as a gear-reduction exampleStanding the bike up, bike trainers, a sideways shaft, adult trikes, and the simple option of chaining straight off the front ringMulti-person setups, Appropedia, and why twenty people still only add up to a few kilowattsWhy direct mechanical drive beats pedaling into a battery, and the kosher thresher they built years agoA listener question on eco-friendly building materials, plus a shop note on weld order and distortion _______________________________ Welcome to the Greenhill Forge Podcast, with Eric from the Greenhill Forge YouTube channel, and my buddy Amal, a fellow builder of many trades. In this podcast we’ll talk about where the real world meets experiments in alternative energy, wood heating, metal fabrication, off-grid engineering and self sufficiency, so expect discussions about workshops, tools, fabrication, building, homesteading, and what it actually takes to make those dreams real. We’ll answer a question each week, so send yours to us at https://forms.gle/zNzKTtjDnBEupLBQA WATCH the podcast on Youtube at https://www.youtube.com/@GreenhillPod LISTEN on all your favorite podcast platforms. See you next week! _______________________________ CHAPTERS 0:00 Bicycle-powered equipment and the wheat thresher build 0:51 How many watts a person can actually put out 2:07 Start at the implement and work backward 3:24 Power takeoff: rear wheel or straight off the crank 4:29 Keeping the bike’s gears, freewheel vs cassette 9:46 Flip-flop hubs and a final-drive ring on the other side 11:43 Steel frame over aluminum 13:01 Derailleurs, horizontal dropouts, and chain tension 15:28 Belt drive: rim as a pulley, inner tubes as belts 18:38 Gear ratios and the chicken rotisserie 25:00 Chain tensioners and which side of the chain is loaded 27:32 Geared one-way drive vs fixed forward-and-back 31:46 Sideways shaft takeoff 34:14 Adult trikes as a ready-made shaft 37:09 Standing the bike up and locking the steering 40:24 Bike trainers as a stand and power takeoff 44:18 Simplest path: chain straight off the front chainring 46:13 Safety with chains and chainrings 47:07 Multi-person power and shared shafts 52:39 Appropedia and scaling human power 57:25 Mechanical drive vs electricity, and why solar changes the math 58:58 The kosher wheat thresher 1:02:43 Recap of the practical options 1:04:19 Flywheels, a pedal bench grinder, and line-shaft shops 1:07:10 Listener question: eco-friendly vs conventional building materials 1:17:37 Tips and tricks: weld order and distortion

  3. Sep 25

    4. Builders debate the houses that last 20 years vs 500

    This week we’re talking about building for longevity — what actually makes a house last 20 years versus 500. We compare modern American stick framing, European masonry, traditional stone, and natural building methods like cob, rammed earth, and straw bale, and why water, airtightness, climate, and skill matter more than the material itself. In this episode: Why old buildings are still standing and modern ones often aren’tHow American stick framing works, and how it has changedTight houses, moisture, mold, and the “Ziploc bag” problemHRVs, wood stoves, negative pressure, and indoor air qualityRain screens vs older tar-paper-and-siding assembliesRepairability vs 25-year wall warrantiesSpeed, year-round building, and the trades skills gapWhy buildings fail as systems, not as single productsModern European masonry and brick-as-rainscreen constructionDry-in time, cost, and US vs UK laborBrick veneer problems, window upgrades, and out-of-plumb stone wallsMaintenance: masonry vs wood sidingLong-lasting roofs: slate, clay tile, and standing seamTraditional stone, field stone, and lost mason knowledgeLaying stone on its natural bed, and orienting wood the way it grewNatural building / “hippie building”: cob, rammed earth, straw bale, earthships, earthbags, and papercreteThermal mass, overhangs, drainage, and climate-specific designPermitting, insurance, and hybrid buildsQuestion of the week: the tool you most regret buyingTip of the week: spend money on tools that need to be precise _______________________________ Welcome to the Greenhill Forge Podcast, with Eric from the Greenhill Forge YouTube channel, and my buddy Amal, a fellow builder of many trades. In this podcast we’ll talk about where the real world meets experiments in alternative energy, wood heating, metal fabrication, off-grid engineering and self sufficiency, so expect discussions about workshops, tools, fabrication, building, homesteading, and what it actually takes to make those dreams real. We’ll answer a question each week, so send yours to us at https://forms.gle/zNzKTtjDnBEupLBQA WATCH the podcast on Youtube at https://www.youtube.com/@GreenhillPod LISTEN on all your favorite podcast platforms. See you next week! _______________________________ CHAPTERS 00:00:00 Intro: Building for longevity 00:02:22 Modern American stick framing 00:05:16 Tight houses, moisture, and the “Ziploc bag” problem 00:11:04 Wood stoves, negative pressure, and indoor air 00:14:38 Rain screens: how wall assemblies actually last 00:19:16 25-year warranties vs easy repairs 00:22:19 Speed, seasons, and the skills gap 00:24:06 Buildings are systems, not products 00:25:33 Modern European masonry 00:27:01 Dry-in time, cost, and labor 00:31:26 Brick veneer, repairs, and out-of-plumb walls 00:37:01 Low maintenance vs hard to get right 00:42:11 Roofs that last: slate, clay, and standing seam 00:49:19 Traditional stone, field stone, and lost knowledge 00:52:32 Natural bed, grain, and why orientation matters 00:55:34 Hippie building 00:56:56 Cob: Devon tradition vs modern cob 01:00:42 Climate, skill, and how natural building fails 01:05:03 Good feet, good hats, and keeping water off 01:06:16 Thermal mass: desert gift, cold-climate problem 01:08:49 Rammed earth 01:14:22 Straw bale, earthships, earthbags, and papercrete 01:18:16 You will never build a perfectly watertight house 01:19:42 Permits, insurance, and hybrid builds 01:23:10 Question of the week: the tool you most regret buying 01:28:47 Tip of the week

  4. Sep 18

    3. Tractors & diggers: choosing small machinery for your property

    This week we’re comparing the small machines that actually get used on homesteads, hobby farms and small properties: compact tractors, skid steers, walk-behind tractors and mini excavators. We’ll go through the real jobs — clearing, grading, digging, gardens, compost, firewood, moving material — plus what to rent vs buy, implement cost and swap time, PTO vs hydraulics, fuel, maintenance, where these things get tippy or annoying, and what we’d buy first if we could only afford one. In this episode: Which machines are usually rented vs purchasedCompact tractor (about 25-40 hp) as the most practical first machineMini excavator as the strongest second machine for digging and tight garden workWhy mini skid steers / dingos rarely earn their keep on a homesteadSkid steer strengths (lift, attachments, speed) and weaknesses (price, fuel, visibility)Walk-behind tractors for small-scale market gardeningImplement storage, used market and DIY buildsDealer vs cheap import, plus the US sub-25 hp emissions cutoffListener question: starting weldingTips of the week CHAPTERS 00:00 - Intro: best small machinery for homesteads, hobby farms and smallholdings 00:51 - Start with the job: raw land vs established property 01:26 - Heavy clearing and big root balls. Rent, don’t buy 04:46 - After infrastructure: when owning a machine starts to make sense 09:51 - Compact tractors, skid steers, walk-behind tractors and mini excavators 11:00 - Mini skid steers / dingos: great on job sites, poor homestead fit 13:55 - Tipping and stability (mini skids, then tractors) 14:13 - Compact tractors: Swiss Army knife, balance problems, counterweights 19:01 - Walk-behind tractors: cheap entry, high labour, fast implement changes 21:34 - Mini excavators: digging, gardens, drainage, compost, reach vs travel speed 33:01 - Skid steers: power, attachments, fuel, visibility, implement swap speed 35:07 - Tractor vs skid steer: pulling, road legality, cost, fuel, maintenance 43:53 - How implements are powered: PTO vs hydraulics 45:39 - Maintenance, parts and how hard each machine is to work on 48:45 - Buying strategy if you can only afford one machine first 52:51 - Size, emissions (sub-25 hp) and dealer vs import brands 55:45 - Audience question: how to start welding 01:00:51 - Weekly tips: stop procrastinating simple jobs + make test pieces 01:04:37 - Wrap-up _______________________________ Welcome to the Greenhill Forge Podcast, with Eric from the Greenhill Forge YouTube channel, and my buddy Amal, a fellow builder of many trades. In this podcast we’ll talk about where the real world meets experiments in alternative energy, wood heating, metal fabrication, off-grid engineering and self sufficiency, so expect discussions about workshops, tools, fabrication, building, homesteading, and what it actually takes to make those dreams real. We’ll answer a question each week, so send yours to us at https://forms.gle/zNzKTtjDnBEupLBQA WATCH the podcast on Youtube at https://www.youtube.com/@GreenhillPod LISTEN on all your favorite podcast platforms. See you next week!

Ratings & Reviews

About

The companion podcast to the Greenhill Forge YouTube channel, where the experiments meet the real world. Alternative energy, wood heating, metal fabrication, off-grid engineering and homesteading — the workshops, the tools, and what it actually takes to make DIY dreams real.